(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Magnetically Coupled Rodless Cylinder, Slider Type: Slide Bearing, CY1S Series (Part Numbers)
- Volume Discount
Air slide table made by SMC
[Features]
· Weight reduced by up to 15% (0.96 kg: conventionally 1.13 kg)
· Overall length reduced by up to 15 mm (240 mm: conventionally 255 mm)
· The inner and outer peripheral surfaces of the cylinder tube are equipped with Lub-retainers to improve lubricity retention.
· Stroke position reproducibility is improved with an adjusting bolt
(i)Caution
- Refer to the catalog for product specifications.
- Product pictures are representations. CAD data is not supported by some of the model numbers.
Part Number
Configured Part Number is shown.
Specifications of Magnet Type Rodless Cylinder, Slider Type / Slide Bearing CY1S Series
Model Number Notation
How to order: image
Applicable auto switches
Applicable auto switch part number identification, reference
- * 1The water resistant type auto switch can be mounted on the above models, but it does not guarantee the water-resistant performance of the product.
Check with the manufacturer regarding water-resistant types for the above model numbers. - * 2Lead wire length 1 m type is only compatible with D-A93.
- *Auto switches are shipped together (but not assembled).
Individual Made-to-Order Specifications
Reference for identifying the part number of individually made-to-order specifications
Made to Order Specifications
Reference for identifying the part number for made-to-order specifications
Specifications Table
| Tube Internal Diameter (mm) | 6 | 10 | 15 | 20 | 25 | 32 | 40 |
|---|---|---|---|---|---|---|---|
| Fluid | Air | ||||||
| Proof Pressure | 1.05 MPa | ||||||
| Maximum operating pressure | 0.7 MPa | ||||||
| Minimum operating pressure | 0.18 MPa | ||||||
| Ambient and fluid temperature | -10°C to +60°C (no freezing) | ||||||
| * Piston Speed | 50 to 400 mm/s | ||||||
| Cushioning | Rubber cushion / shock absorber | ||||||
| Lubrication | Not required | ||||||
| Stroke Length Tolerance (mm) | 0-250st: 0 to +1.0, 251 to 1,000st: 0 to +1.4, 1,001st to: 0～+1.8 | ||||||
| Magnetic retention force (N) | 19.6 | 53.9 | 137 | 231 | 363 | 588 | 922 |
- * When setting the auto switch to the intermediate position, the maximum piston speed that can be detected is restricted by the response time of the load (relay, sequence controller, etc.).
Standard Stroke Table
| Tube Internal Diameter (mm) | Standard Stroke (mm) | Manufacturable Maximum stroke (mm) |
|---|---|---|
| 6 | 50, 100, 150, 200 | 300 |
| 10 | 50, 100, 150, 200, 250, 300 | 500 |
| 15 | 50, 100, 150, 200, 250, 300, 350, 400, 450, 500 | 750 |
| 20 | 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800 | 1,000 |
| 25 | 1,500 | |
| 32 | ||
| 40 | 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1,000 | 1,500 |
- * *1) The minimum manufacturable stroke is up to 15st without a switch or with 1 switch, and up to 25st with 2 switches.
- * *2) If there are multiple switches and the stroke is shorter than 25st (up to 15st), consider X431 (2 switch rail types).
Weight Table
(Unit: kg)
| Tube Internal Diameter (mm) | 6 | 10 | 15 | 20 | 25 | 32 | 40 | |
|---|---|---|---|---|---|---|---|---|
| CY1S□ | Basic weight | 0.231 | 0.428 | 0.743 | 1.317 | 1.641 | 2.870 | 4.508 |
| Additional weight per 50 strokes | 0.053 | 0.082 | 0.111 | 0.184 | 0.186 | 0.284 | 0.430 | |
| CY1SG□ | Basic weight | 0.236 | 0.435 | 0.743 | 1.331 | 1.662 | 2.903 | 4.534 |
| Additional weight per 50 strokes | 0.050 | 0.079 | 0.108 | 0.176 | 0.178 | 0.273 | 0.411 | |
Calculation method/example: CY1SG25-500
Basic weight (At 0 stroke): 1.662 kg / additional weight per 50 strokes: 0.178 kg
Cylinder Stroke: 500st
1.662 + 0.178×500 ÷ 50 = 3.442 kg
Shock Absorber Specifications
| Compatible cylinder | CY1S□6 | CY1S□10 | CY1S□15 | CY1S□20 | CY1S□25 | CY1S□32 | CY1S□40 |
|---|---|---|---|---|---|---|---|
| Shock absorber model | RJ0604 | RJ0806H | RJ0806L | RJ1007L | RJ1412L | RJ2015H | RJ2015L |
| Maximum energy absorption (J) | 0.5 | 1 | 3 | 10 | 30 | ||
| Stroke absorption (mm) | 4 | 6 | 7 | 12 | 15 | ||
| Collision speed (m/s) | 0.05 to 1 | 0.05 to 2 | 0.05 to 1 | 0.05 to 1 | 0.05 to 1 | 0.05 to 2 | 0.05 to 1 |
| Maximum frequency of use (cycle/min) | 80 | 80 | 70 | 45 | 25 | ||
| Max. allowable thrust (N) | 150 | 245 | 422 | 814 | 1961 | ||
| Ambient Temperature (°C) | -10°C to +60°C (no freezing) | ||||||
* *) The maximum absorbed energy and maximum frequency of use are the values at room temperature (approximately 20 to 25°C).
Diagram
CY1S / both sides piping type configuration diagram
Structural drawing of CY1SG / Centralized piping type
Components
| Number | Name | Material | Note |
|---|---|---|---|
| 1 | Magnet A | - | - |
| 2 | Piston-Side Yoke | Rolled steel | - |
| 3 | Piston | Aluminum alloy | - |
| *4 | Piston packing | NBR | - |
| *5 | Wear Ring A | Special resin | - |
| *6 | Lube-retainer A | Special resin | Excluding ø6 (diameter 6 mm) and ø10 (diameter: 10 mm) |
| 7 | Shaft | Stainless steel | - |
| 8 | Piston Nut | Carbon steel | Except ø6 (diameter: 6 mm) to ø15 (diameter: 15 mm) |
| 9 | Slide block | Aluminum alloy | - |
| 10 | Bushing | Resin/Copper alloy (Multiple layers) | - |
| 11 | Parallel pin | Carbon steel | - |
| 12 | Moving element spacer | Rolled steel | - |
| *13 | Mover gasket | NBR | - |
| 14 | Retaining Ring | Carbon tool steel | - |
| 15 | Magnet for switches | - | - |
| 16 | External Slider Tube | Aluminum alloy | - |
| 17 | Magnet B | - | - |
| 18 | External Slider Side Yoke | Rolled steel | - |
| *19 | Wear Ring B | Special resin | - |
| *20 | Lube-retainer B | Special resin | Except ø6 (diameter: 6 mm) |
| 21 | Spacer | Rolled steel | Except ø6 (diameter: 6 mm) |
| 22 | Plate A | Aluminum alloy | - |
| 23a | Plate C | Aluminum alloy | For piping on both sides |
| 23b | Plate B | Aluminum alloy | For centralized piping |
| *24 | Cylinder Tube Gasket | NBR | - |
| 25 | Bumper bolt | Chrome molybdenum steel | - |
| 26 | Damper | Urethane rubber | - |
| 27 | Cylinder Tube | Stainless steel | - |
| 28 | Guide shaft B | Carbon steel | Hard chrome plating |
| 29a | Guide shaft C | Carbon steel | Hard chrome plating |
| 29b | Guide shaft A | Carbon steel | Hard chrome plating |
| 30 | Switch rail | Aluminum alloy | - |
| 31 | Hex Socket Head Set Screw | Chrome molybdenum steel | - |
| 32 | Hex Socket Head Cap Screw | Chrome molybdenum steel | - |
| 33 | Hex Nut | Chrome molybdenum steel | - |
| 34 | Hex Nut | Chrome molybdenum steel | - |
| 35 | Square Nut | Chrome molybdenum steel | - |
| 36 | Cross-head machine screw with SW | Chrome molybdenum steel | - |
| 37 | Switch spacer | Special resin | - |
| 38 | Port plug | Chrome molybdenum steel | ø6 (diameter: 6 mm), piping on both sides only |
| *39 | Guide shaft gasket | NBR | For centralized piping |
| 40 | Steel ball | Bearing steel | For centralized piping |
| 41 | Adjusting bolt | Chrome molybdenum steel | - |
| 42 | Auto switch | - | - |
| 43 | Shock absorber | - | - |
| 44 | Liner | Aluminum alloy | - |
- * *1) The contents of the parts of the seal set are * -marked.
- * *2) Auto switch and switch spacer are shipped together.
Packing set
| Tube inner diameter (mm) | Packing set | |
|---|---|---|
| Part No. | Details | |
| 6 | CY1S6-Z-PS | Above number 4, 5, 13, 19, 24, 39 |
| 10 | CY1S10-Z-PS | Above number 4, 13, 19, 20, 24, 39 |
| 15 | CY1S15-Z-PS | Above number 4, 5, 6, 13, 19, 20, 24, 39 |
| 20 | CY1S20-Z-PS | |
| 25 | CY1S25-Z-PS | |
| 32 | CY1S32-Z-PS | |
| 40 | CY1S40-Z-PS | |
- * *1) For the seal kit, the ø6 kit (inner diameter: 6 mm) includes 4, 5, 13, 19, 24, 39, and the ø10 kit (inner diameter: 10 mm) includes 4, 13, 19, 20, 24, 39, the kits for ø15 (inner diameter: 15 mm) to ø40 (inner diameter: 40 mm) include 4, 5, 6, 13, 19, 20, 24, 39 in 1 set, so please order using the order number for each tube inner diameter.
- * *2) A grease pack (10 g) is attached to the seal kit.
Dimensions of Magnet Type Rodless Cylinder, Slider Type / Slide Bearing CY1S Series
CY1S / both sides piping type
(Units: mm)
Dimensional drawing of CY1S / both sides piping type
(Units: mm)
Image of dimensions table for CY1S / both sides piping type
- * *) The above figure shows the case where the auto switch is installed. The auto switch and switch spacer are shipped together.
CY1SG / Centralized piping type
(Units: mm)
Dimensional drawing of CY1SG / Centralized piping type
(Units: mm)
Image of dimensions table for CY1SG / centralized piping type
- * *) The above figure shows the case where the auto switch is installed. The auto switch and switch spacer are shipped together.
Please refer to the table below for details about lead wire / connector specifications.
Loading...
Basic Information
| Type | Rodless Cylinder | Table Material | Aluminum Alloy | Rodless Cylinder Joint Type | Magnetic |
|---|---|---|---|---|---|
| Environment | General Purpose | Table Surface Treatment | No | Guide | Guide Type of Slide Bearing |
| Switch Rail | Yes | Specifications | Magnet built-in |
Specification/Dimensions
-
Stroke(mm)
-
Max. Load Mass (Horizontal Mounting)(kg)
-
Max. Load Mass(kg)
-
Table Size Length L(mm)
-
Table Size Width W(mm)
-
Table Size Height H(mm)
-
Operating Pressure(MPa)
-
Cylinder I.D.(Ø)
-
Piping Format
- Centralized piping
- Dual-side piping
-
Port Screw Type
- G
- M screw
- NPT
- Rc
-
Adjuster Option
-
Auto Switches
-
Lead Wire Length(m)
- 0.5
- 3
-
Lead Wire Connector
- M8 3‑pin plug connector
- None
-
The number of the switches
- 2
-
Custom-made Specifications
-
Custom-made
- Hard chrome plating on outer surface of cylinder tube
- Lubrication-free exterior specification (with dust seal)
- None
- Tapped hole on mounting surface specification
-
type
- CY1S
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Days or Less
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Air Slide Table (Symmetric) / MXS□L Series
- Air Slide Table / MXP Series
- Mechanically Jointed Rodless Cylinder With Protective Cover, MY1□W Series
- Mechanically Jointed Rodless Cylinder, High-Rigidity Linear Guide Type MY1HT Series
- Mechanically Jointed Rodless Cylinder, Cam Follower Guide Type MY2C Series
- Magnetically Coupled Rodless Cylinder, Low Profile Guide Type, CY1F Series
- Sine Rodless Cylinder, Slider Type: Slide Bearing, REAS Series
- Stroke Reading Rodless Cylinder With Brake ML2B Series
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy