(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A taper pin with an external thread that complies with Himeno standards (THM).
Part Number
Configured Part Number is shown.
STP-Q-13X80
Nominal diameter | 4 | 5 | 6 | 8 | 10 | 13 | 16 | |||||||||||||||||||||||||||
d | Reference dimension | 4 | 5 | 6 | 8 | 10 | 13 | 16 | ||||||||||||||||||||||||||
tolerance | +0.03 0 | +0.036 0 | +0.043 0 | |||||||||||||||||||||||||||||||
d1 | Screw size | M4 | M5 | M6 | M8 | M10 | M12 | M12 | ||||||||||||||||||||||||||
pitch | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 1.75 | |||||||||||||||||||||||||||
L1 | 10 | 10 | 10 | 12 | 15 | 18 | 22 | |||||||||||||||||||||||||||
d2 | 2.5 | 3 | 3.5 | 5.5 | 7 | 9 | 9 | |||||||||||||||||||||||||||
L dimensions and tolerances | ||||||||||||||||||||||||||||||||||
L | 20 | 25 | � 0.25 | |||||||||||||||||||||||||||||||
32 | 40 | 45 | 50 | � 0.5 | ||||||||||||||||||||||||||||||
60 | 70 | 80 | 100 | 110 | 130 | 150 | Master 1.0 | |||||||||||||||||||||||||||
Shape | Taper | Style | Positive Tolerance | Shaft End Shape | Outside Screw |
---|---|---|---|---|---|
Material Details | 1045 Carbon Steel | Surface Finish | No | Tolerance | No |
Sanko Code | Presence |
Please check the type/dimensions/specifications of the part STP-Q-13X80 in the S45C-Q Taper Pin With External Thread series.
Part Number |
---|
STP-Q-10X130 |
STP-Q-10X140 |
STP-Q-10X25 |
STP-Q-16X100 |
STP-Q-16X50 |
STP-Q-16X60 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy