(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Non-Coated TS Coated Carbide 0.1mm Unit Radius Designated End Mill
3 day delivery of add-on machining radius in 0.1 mm increments
- Non-Coated
- General Steel
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| TSC-REM2B4-R[0.1-1/0.1] |
| TSC-REM2L10-R[0.1-3/0.1] |
| TSC-REM2L12-R[0.1-3/0.1] |
| TSC-REM2S2.5-R[0.1-0.5/0.1] |
| TSC-REM4B10-R[0.1-3/0.1] |
| TSC-REM4B12-R[0.1-3/0.1] |
| TSC-REM4R10-R[0.1-3/0.1] |
| TSC-REM4S10-R[0.1-3/0.1] |
Loading...
Specifications
Model Number
SEC-REM2B / TSC-REM2B
SEC-REM4B / TSC-REM4B (1.5 D Blade Length Type)
| Flute Diameter D | Corner R 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 3 | 0.1 ~ 0.7 | 4.5 | 45 | 6 | 1 |
| 3.5 | 0.1 ~ 0.7 | 5.25 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 6 | 45 | 6 | 1 |
| 4.5 | 0.1 ~ 1.0 | 6.75 | 45 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 7.5 | 45 | 6 | 1 |
| 5.5 | 0.1 ~ 1.0 | 8.25 | 45 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 9 | 45 | 6 | 2 |
| 8 | 0.1 ~ 2.0 | 12 | 60 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 15 | 70 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 18 | 75 | 12 | 2 |
| 16 | 0.1 ~ 3.0 | 24 | 100 | 16 | 2 |
| 20 | 0.1 ~ 3.0 | 30 | 105 | 20 | 2 |
Model Number
SEC-REM2S / TSC-REM2S
SEC-REM4S / TSC-REM4S (2 D Blade Length Type)
| Flute Diameter D | Corner R 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 2 | 0.1 ~ 0.5 | 4 | 40 | 4 | 1 |
| 2.5 | 0.1 ~ 0.5 | 5 | 40 | 4 | 1 |
| 2.8 | 0.1 ~ 0.5 | 5.6 | 40 | 4 | 1 |
| 3 | 0.1 ~ 0.7 | 6 | 45 | 6 | 1 |
| 3.5 | 0.1 ~ 0.7 | 7 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 8 | 45 | 6 | 1 |
| 4.5 | 0.1 ~ 1.0 | 9 | 45 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 10 | 45 | 6 | 1 |
| 5.5 | 0.1 ~ 1.0 | 11 | 45 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 12 | 45 | 6 | 2 |
| 8 | 0.1 ~ 2.0 | 16 | 55 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 20 | 65 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 24 | 75 | 12 | 2 |
| 16 | 0.1 ~ 3.0 | 32 | 100 | 16 | 2 |
| 20 | 0.1 ~ 3.0 | 40 | 105 | 20 | 2 |
Model Number
SEC-REM2SR / TSC-REM2SR (2.5 D Blade Length Type)
* There is no standard for 4 flutes.iece
1 Piece Unit
| Flute Diameter D | Corner R 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 3 | 0.1 ~ 0.7 | 7.5 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 10 | 50 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 12.5 | 55 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 15 | 60 | 6 | 2 |
| 8 | 0.1 ~ 2.0 | 20 | 70 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 25 | 80 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 30 | 85 | 12 | 2 |
Model Number
SEC-REM2R / TSC-REM2R
SEC-REM4R / TSC-REM4R (3 D Blade Length Type)
| Flute Diameter D | Corner R 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 2 | 0.1 ~ 0.5 | 6 | 45 | 4 | 1 |
| 2.5 | 0.1 ~ 0.5 | 7.5 | 45 | 4 | 1 |
| 2.8 | 0.1 ~ 0.5 | 8.4 | 45 | 4 | 1 |
| 3 | 0.1 ~ 0.7 | 9 | 45 | 6 | 1 |
| 3.5 | 0.1 ~ 0.7 | 10.5 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 12 | 50 | 6 | 1 |
| 4.5 | 0.1 ~ 1.0 | 13.5 | 50 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 15 | 55 | 6 | 1 |
| 5.5 | 0.1 ~ 1.0 | 16.5 | 55 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 18 | 60 | 6 | 2 |
| 8 | 0.1 ~ 2.0 | 24 | 70 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 30 | 80 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 36 | 85 | 12 | 2 |
| 16 | 0.1 ~ 3.0 | 48 | 115 | 16 | 2 |
| 20 | 0.1 ~ 3.0 | 60 | 125 | 20 | 2 |
Model Number
SEC-REM2RL / TSC-REM2RL (3.5 D Blade Length Type)
* There is no standard for 4 flutes.
1 Piece Unit
| Flute Diameter D | Corner R 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 3 | 0.1 ~ 0.7 | 10.5 | 45 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 14 | 50 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 17.5 | 55 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 21 | 60 | 6 | 2 |
| 8 | 0.1 ~ 2.0 | 28 | 70 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 35 | 80 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 42 | 95 | 12 | 2 |
Model Number
SEC-REM2L / TSC-REM2L (4 D Blade Length Type)
* There is no standard for 4 flutes.
1 Piece Unit
| Flute Diameter D | Corner R 0.1 mm Increment Designation | Blade Length ℓ | Overall Length L | Shank Diameter d | Figure |
| 3 | 0.1 ~ 0.7 | 12 | 50 | 6 | 1 |
| 4 | 0.1 ~ 1.0 | 16 | 60 | 6 | 1 |
| 5 | 0.1 ~ 1.0 | 20 | 60 | 6 | 1 |
| 6 | 0.1 ~ 1.2 | 24 | 60 | 6 | 2 |
| 8 | 0.1 ~ 2.0 | 32 | 100 | 8 | 2 |
| 10 | 0.1 ~ 3.0 | 40 | 100 | 10 | 2 |
| 12 | 0.1 ~ 3.0 | 48 | 100 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
Basic Information
| Model | Regular Type | Helix Angle (Θ) | Standard Helix (30 to 40°) | R Precision(µm) | ±0.02 |
|---|---|---|---|---|---|
| Additional Classification | Manufactured Product |
Specification/Dimensions
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Curved Surface
- Groove
- Inclined Cutting
-
Coating
- For High Hardness (Silicone-Based)
- Non-Coated
-
type
- SEC-REM2B
- SEC-REM2L
- SEC-REM2R
- SEC-REM2RL
- SEC-REM2S
- SEC-REM2SR
- SEC-REM4B
- SEC-REM4R
- SEC-REM4S
- TSC-REM2B
- TSC-REM2L
- TSC-REM2S
- TSC-REM4B
- TSC-REM4R
- TSC-REM4S
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Stainless Steel
- Cast Iron
- Aluminum Alloy
- Copper Alloy
Days to Ship
-
- All
- 10 Days or Less
- 16 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- TSC Series Carbide Radius End Mill, 4-Flute, 45° Regular Model
- TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.02 Radius Precision
- 2-Flute, Corner R, Short Type GX-CR-EDS-SF
- 2-Flute, Corner R Short Type FX-CR-MG-EDS
- C-CRS UT Coated 2-Flute Radius
- Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type
- Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X
- GSX MILL VL Long Shank Radius 1.5 D for Ti/SUS GSXVLLS4T-R-1.5D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy