(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 6/29/2024 to 5:00 p.m. (CDT) 6/30/2024. We apologize for the inconvenience.
TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model (TSC-EM2B3)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
A short blade length (stub) series that's ideal for high-speed machining
- TS
- General Steel
- 2 Flutes
- B (Stub)
Part Number
Configured Part Number is shown.
TSC-EM2B3
| Part Number |
|---|
| TSC-EM2B3 |
Loading...
Specifications
Model Number
TSC-EM2B (Standard) / TSC-PEM2B (Sharp Edge)
| Outer Diameter D |
Shank Diameter d |
Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | ● Stocked Product □ Manufactured Product |
| 0.5 | - | 4 | 0.75 | 40 | 1 | ● |
| 1 | - | 4 | 1.5 | 40 | 1 | ● |
| 1.5 | - | 4 | 2.25 | 40 | 1 | ● |
| 2 | - | 4 | 3 | 40 | 1 | ● |
| 2 | 6 | 6 | 3 | 40 | 1 | ● |
| 2.5 | - | 4 | 3.75 | 40 | 1 | ● |
| 3 | - | 6 | 4.5 | 45 | 1 | ● |
| 3.01 ~ 3.49 | - | 6 | 5.25 | 45 | 1 | □ |
| 3.5 | - | 6 | 5.25 | 45 | 1 | ● |
| 3.51 ~ 3.99 | - | 6 | 6 | 45 | 1 | □ |
| 4 | - | 6 | 6 | 45 | 1 | ● |
| 4.01 ~ 4.49 | - | 6 | 6.75 | 45 | 1 | □ |
| 4.5 | - | 6 | 6.75 | 45 | 1 | ● |
| 4.51 ~ 4.99 | - | 6 | 7.5 | 45 | 1 | □ |
| 5 | - | 6 | 7.5 | 45 | 1 | ● |
| 5.01 ~ 5.49 | - |
6 |
8.25 |
45 |
1 | □ |
| 5.5 | - |
6 |
8.25 |
45 |
1 | ● |
| 5.51 ~ 5.99 | - |
6 |
9 |
45 |
1 | □ |
| 6 | - |
6 |
9 |
45 |
2 | ● |
| 7.51 ~ 7.99 | - |
8 |
12 |
60 |
1 | □ |
| 8 | - |
8 |
12 |
60 |
2 | ● |
| 9.51 ~ 9.99 | - |
10 |
15 |
70 |
1 | □ |
| 10 | - |
10 |
15 |
70 |
2 | ● |
| 11.51 ~ 11.99 | - |
12 |
18 |
75 |
1 | □ |
| 12 | - |
12 |
18 |
75 |
2 | ● |
| 14 | - |
12 |
21 |
75 |
3 | ● |
| 15.51 ~ 15.99 | - |
16 |
24 |
100 |
1 | □ |
| 16 | - |
16 |
24 |
100 |
2 | ● |
| 19.51 ~ 19.99 | - |
20 |
30 |
105 |
1 | □ |
| 20 | - |
20 |
30 |
105 |
2 | ● |
[ ! ]Blade diameters of manufactured products are designated in 0.01 mm increments
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● This product uses a blade with a flute length 1.5 times greater than the blade diameter, which is ideal for high speed machining.
Basic Information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Helix Angle (θ) | Standard Helix (30 to 40°) |
| Tolerance of OD(mm) | 0 ~ -0.02 |
Please check the type/dimensions/specifications of the part TSC-EM2B3 in the TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model series.
Specification/Dimensions
-
type
- TSC-EM2B
- TSC-PEM2B
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Geometry
- Sharp Corner
- With Lead
-
Additional Classification
- Manufactured Product
- Stocked Product
Days to Ship
-
- All
- 8 Days or Less
- 16 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| TSC-EM2B10 |
| TSC-EM2B12 |
| TSC-EM2B14 |
| TSC-EM2B3.5 |
| TSC-EM2B4 |
| TSC-EM2B4.5 |
Additional Products in this Category
- XAL Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model
- NX-40 Lead 40 End Mill
- MX435 MUGEN-COATING 4-Flute LEAD 35 End Mill
- MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill
- Power Solid End Mill NE-4
- Carbide Air Hole End Mill 4-Flute, Standard Type
- Solid End Mill LS-OCFS2 Type
- Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW
Complementary Products
-
XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model
MISUMI Days to Ship : 8 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy