(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Misumi's unique lineup of fine blade length is available at attractive low prices [C-Value]
Part Number
Configured Part Number is shown.
Part Number |
---|
XAL-PEM2R12 |
XAL-PEM2R16 |
XAL-PEM2R18 |
XAL-PEM2R20 |
Loading...
Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | Standards Y/N | |||
Outer Diameter D |
Shank Diameter d |
|||||||
Standard | Sharp Edge | |||||||
XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge) |
0.1 | — | 3 | 0.3 | 40 | 1 | No Standards | ● |
0.2 | — | 3 | 0.6 | 40 | 1 | No Standards | ● | |
0.3 | — | 3 | 0.9 | 40 | 1 | ● | ● | |
0.4 | — | 3 | 1.2 | 40 | 1 | No Standards | ● | |
0.5 | — | 3 | 1.5 | 40 | 1 | ● | ● | |
0.6 | — | 3 | 1.8 | 40 | 1 | ● | ● | |
0.7 | — | 3 | 2.1 | 40 | 1 | No Standards | ● | |
0.8 | — | 3 | 2.4 | 40 | 1 | ● | ● | |
0.9 | — | 4 | 2.7 | 45 | 1 | No Standards | ● | |
1 | — | 4 | 3 | 45 | 1 | ● | ● | |
1.1 | — | 4 | 3.3 | 45 | 1 | No Standards | ● | |
1.2 | — | 4 | 3.6 | 45 | 1 | No Standards | ● | |
1.3 | — | 4 | 3.9 | 45 | 1 | No Standards | ● | |
1.4 | — | 4 | 4.2 | 45 | 1 | No Standards | ● | |
1.5 | — | 4 | 4.5 | 45 | 1 | ● | ● | |
1.6 | — | 4 | 4.8 | 45 | 1 | No Standards | ● | |
1.7 | — | 4 | 5.1 | 45 | 1 | No Standards | ● | |
1.8 | — | 4 | 5.4 | 45 | 1 | No Standards | ● | |
1.9 | — | 4 | 5.7 | 45 | 1 | No Standards | ● | |
2 | — | 4 | 6 | 45 | 1 | ● | ● | |
2.1 | — | 4 | 6.3 | 45 | 1 | No Standards | ● | |
2.2 | — | 4 | 6.6 | 45 | 1 | No Standards | ● | |
2.3 | — | 4 | 6.9 | 45 | 1 | No Standards | ● | |
2.4 | — | 4 | 7.2 | 45 | 1 | No Standards | ● | |
2.5 | — | 4 | 7.5 | 45 | 1 | No Standards | ● | |
2.6 | — | 4 | 7.8 | 45 | 1 | No Standards | ● | |
2.7 | — | 4 | 8.1 | 45 | 1 | No Standards | ● | |
2.8 | — | 4 | 8.4 | 45 | 1 | No Standards | ● | |
2.9 | — | 4 | 8.7 | 45 | 1 | No Standards | ● | |
3 | 4 | 4 | 9 | 45 | 1 | No Standards | ● | |
3 | — | 6 | 9 | 45 | 1 | ● | ● | |
3.1 | — | 6 | 9.3 | 45 | 1 | No Standards | ● | |
3.2 | — | 6 | 9.6 | 45 | 1 | No Standards | ● | |
3.3 | — | 6 | 9.9 | 45 | 1 | No Standards | ● |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | Standards Y/N | |||
Outer Diameter D |
Shank Diameter d |
|||||||
Standard | Sharp Edge | |||||||
XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge) |
3.4 | — | 6 | 10.2 | 45 | 1 | No Standards | ● |
3.5 | — | 6 | 10.5 | 45 | 1 | ● | ● | |
3.6 | — | 6 | 10.8 | 45 | 1 | No Standards | ● | |
3.7 | — | 6 | 11.1 | 45 | 1 | No Standards | ● | |
3.8 | — | 6 | 11.4 | 45 | 1 | No Standards | ● | |
3.9 | — | 6 | 11.7 | 45 | 1 | No Standards | ● | |
4 | 4 | 4 | 12 | 50 | 2 | No Standards | ● | |
4 | — | 6 | 12 | 50 | 1 | ● | ● | |
4.1 | — | 6 | 12.3 | 50 | 1 | No Standards | ● | |
4.2 | — | 6 | 12.6 | 50 | 1 | No Standards | ● | |
4.3 | — | 6 | 12.9 | 50 | 1 | No Standards | ● | |
4.4 | — | 6 | 13.2 | 50 | 1 | No Standards | ● | |
4.5 | — | 6 | 13.5 | 50 | 1 | No Standards | ● | |
4.6 | — | 6 | 13.8 | 55 | 1 | No Standards | ● | |
4.7 | — | 6 | 14.1 | 55 | 1 | No Standards | ● | |
4.8 | — | 6 | 14.4 | 55 | 1 | No Standards | ● | |
4.9 | — | 6 | 14.7 | 55 | 1 | No Standards | ● | |
5 | — | 6 | 15 | 55 | 1 | ● | ● | |
5.1 | — | 6 | 15.3 | 55 | 1 | No Standards | ● | |
5.2 | — | 6 | 15.6 | 55 | 1 | No Standards | ● | |
5.3 | — | 6 | 15.9 | 55 | 1 | No Standards | ● | |
5.4 | — | 6 | 16.2 | 55 | 1 | No Standards | ● | |
5.5 | — | 6 | 16.5 | 55 | 1 | No Standards | ● | |
5.6 | — | 6 | 16.8 | 60 | 1 | No Standards | ● | |
5.7 | — | 6 | 17.1 | 60 | 1 | No Standards | ● | |
5.8 | — | 6 | 17.4 | 60 | 1 | No Standards | ● | |
5.9 | — | 6 | 17.7 | 60 | 1 | No Standards | ● | |
6 | — | 6 | 18 | 60 | 2 | ● | ● | |
6.5 | — | 8 | 19.5 | 60 | 1 | No Standards | ● | |
7 | — | 8 | 21 | 60 | 1 | ● | ● | |
7.5 | — | 8 | 22.5 | 70 | 1 | No Standards | ● | |
8 | — | 8 | 24 | 70 | 2 | ● | ● | |
8.5 | — | 10 | 25.5 | 70 | 1 | No Standards | ● | |
9 | — | 10 | 27 | 70 | 1 | No Standards | ● | |
9.5 | — | 10 | 28.5 | 75 | 1 | No Standards | ● | |
10 | — | 10 | 30 | 80 | 2 | ● | ● | |
11 | — | 12 | 33 | 85 | 1 | No Standards | ● | |
12 | — | 12 | 36 | 85 | 2 | ● | ● | |
14 | — | 12 | 42 | 80 | 3 | ● | No Standards | |
16 | — | 16 | 48 | 110 | 2 | ● | ● | |
18 | — | 16 | 54 | 110 | 3 | No Standards | ● | |
20 | — | 20 | 60 | 110 | 2 | ● | ● |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
● Competitive pricing with significant price breaks on larger quantities.
● The XAL coating provides excellent lubrication and delivers stable wear-resistant performance.This is apparent especially when milling raw materials, giving improved shape accuracy to the machined objects.
● 2-flute end mill can be used in a wide variety of applications.
● The XAL coating is non-conductive. Cannot be used with conduction model tool setters.
Number of Flutes(sheet) | 2 | Model | Square | Coating | For General Steel (AlCrN etc.) |
---|---|---|---|---|---|
Helix Angle (θ) | Standard Helix (30 to 40°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
● Inventory Product □ Manufacturer Product | ● |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy