(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
600 V heat-resistant single-core wire
Part Number
Configured Part Number is shown.
FA-2-BE-50
Model Number | Section Area (mm2) | Color |
FA | 0.3* (AWG22) | W (White) / BK (Black) R (Red) / BE (Blue) Y (Yellow) / GN (Green) N (Transparent) |
0.5* (AWG20) | ||
0.75* (AWG18) | ||
1.25* (AWG16) | ||
2* (AWG14) | ||
3.5* (AWG12) |
Operating Temperature Range | -60 ~ 150°C |
Standard Acquired | PSE (0.75 ~ 3.5 mm2Only) |
Bending Radius | Finished Outer Diameter x 8 (Fixed Part Only) |
Model Number | Section Area (mm2) | Color | Total Length (m) | Conductor | Insulation Thickness Approx. (mm) | Finished Outer Diameter Approx. (mm) | Electrical Properties | Approximate Mass kg/km | PSE Law | ||||
Structure (Strands / mm) | Outer Diameter Approx. (mm) | Max. Conductor Resistance Ω/km (20 °C) | Insulation Resistance MΩ / km (20°C) | Test Voltage V / Min | Allowable Current (30°C) | ||||||||
FA | 0.3* (AWG22) | W (White) / BK (Black) R (Red) / BE (Blue) Y (Yellow) / GN (Green) N (Transparent) | 10 / 50 / 100 / 200 (1 Roll) | 12/0.18 | 0.72 | 0.25 | 1.22 | 64.4 | 1500 | 2000 | 10.8 | 4.9 | — |
0.5* (AWG20) | 19/0.18 | 0.9 | 1.4 | 40.6 | 14.7 | 6.9 | — | ||||||
0.75* (AWG18) | 30/0.18 | 1.1 | 0.4 | 1.9 | 25.8 | 2500 | 1500 | 21 | 11.38 | ○ | |||
1.25* (AWG16) | 50/0.18 | 1.5 | 2.3 | 15.5 | 2000 | 30 | 11.70 | ○ | |||||
2* (AWG14) | 37/0.26 | 1.8 | 2.6 | 9.91 | 1500 | 40 | 24.99 | ○ | |||||
3.5* (AWG12) | 45/0.32 | 2.5 | 3.3 | 5.38 | 60 | 43.90 | ○ |
Ambient Temperature (°C) | 40 | 50 | 60 | 70 | 80 | 100 | 120 |
Current Reduction Factor | 0.96 | 0.93 | 0.9 | 0.86 | 0.83 | 0.76 | 0.68 |
Ambient Temperature (°C) | 130 | 140 | 150 | 160 | 170 | 180 | 190 |
Current Reduction Factor | 0.63 | 0.6 | 0.55 | 0.48 | 0.41 | 0.35 | 0.25 |
Model Number | Section Area | Total Length | |||
10m | 50m | 100m | 200m | ||
FA | 0.3* (AWG22) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | — |
0.5* (AWG20) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | — | |
0.75* (AWG18) | Vinyl Bag (Wrap) | Vinyl Bag (Wrap) | Vinyl Bag (Wrap) | Case | |
1.25* (AWG16) | Vinyl Bag (Wrap) | Vinyl Bag (Wrap) | Vinyl Bag (Wrap) | Case | |
2* (AWG14) | Vinyl Bag (Wrap) | Vinyl Bag (Wrap) | Vinyl Bag (Wrap) | Case | |
3.5* (AWG12) | Vinyl Bag (Wrap) | Vinyl Bag (Wrap) | Vinyl Bag (Wrap) | Case |
Number of cores(Core) | 1 | Rated voltage | 600V | Shield | N/A |
---|---|---|---|---|---|
Properties | Heat-resistant / Cold Resistance / Chemical Resistance | Representative standards | PSE | Sheath (outer coating) material | Fluorine |
Power supply/signal | Dual Use |
Please check the type/dimensions/specifications of the part FA-2-BE-50 in the Hook-Up Wires - FA Fluorine, Heat-Resistant series.
Part Number |
---|
FA-0.75-BE-50 |
FA-0.75-BK-10 |
FA-0.75-BK-100 |
FA-2-BK-10 |
FA-2-BK-100 |
FA-2-BK-200 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy