(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
NJW Series Circular Connector - Waterproof, Relay Adapter (Part Numbers)
- Volume Discount
Manufactured by Seven Star Science Laboratory Ltd. Designed to have waterproof functionality when fitting.
- For Power Supply
- For Signal
- Connection between Boards
- Solder
- Silver-Plated
● It connects to straight plugs.
● Offers waterproof functionality when mated. 
· Be sure to combine male (pin) and female (socket) parts of the same shell size and core number.
· Relay models cannot be fitted with one another.
· Does not support key position changes.
Part Number
Configured Part Number is shown.
Specifications
| Model | Shell Size |
Number of Cores | Shape Symbol | Clamp Size (Note 1) |
Contact Shape | Weight g (Note 2) |
| NJW | 16 | 3 | ADM | 9 11 |
Male (Pin) | 55 |
| 5 | 54 | |||||
| 3 | ADF | Female (Socket) | 57 | |||
| 5 | 55 ~ 56 | |||||
| 20 | 2 | ADM | 8 10 12 |
Male (Pin) | 73 ~ 74 | |
| 3 | 74 ~ 75 | |||||
| 4 | 73 ~ 74 | |||||
| 5 | 74 ~ 75 | |||||
| 7 | 74 ~ 75 | |||||
| 12 | 73 ~ 75 | |||||
| 2 | ADF | Female (Socket) | 76 ~ 77 | |||
| 3 | 77 ~ 78 | |||||
| 4 | 76 ~ 78 | |||||
| 5 | 77 ~ 79 | |||||
| 7 | 78 ~ 79 | |||||
| 12 | 76 ~ 77 | |||||
| 24 | 2 | ADM | 11 13 15 |
Male (Pin) | 98 ~ 99 | |
| 3 | 101 ~ 102 | |||||
| 4 | 95 ~ 96 | |||||
| 5 | 96 ~ 97 | |||||
| 10 | 11 13 | 95 ~ 97 | ||||
| 15 | ||||||
| 14 | 11 13 15 |
93 ~ 95 | ||||
| 16 | 94 ~ 95 | |||||
| 2 | ADF | Female (Socket) | 99 ~ 100 | |||
| 3 | 100 ~ 101 | |||||
| 4 | 100 ~ 101 | |||||
| 5 | 101 ~ 102 | |||||
| 10 | 13 15 | 101 ~ 102 | ||||
| 11 | ||||||
| 14 | 11 15 | 98 ~ 99 | ||||
| 13 | ||||||
| 16 | 11 | 98 ~ 99 | ||||
| 13 15 | ||||||
| 28 | 16 | ADM | 14 16 | Male (Pin) | 65 ~ 68 | |
| 18 | ||||||
| 24 | 16 | 63 ~ 65 | ||||
| 14 18 | ||||||
| 16 | ADF | 14 16 | Female (Socket) | 73 ~ 76 | ||
| 18 | ||||||
| 24 | 69 ~ 71 | |||||
| 14 16 |
(Note 1) There are several types of clamp sizes depending on the finished external diameter of the wire used. Check the appropriate size in the clamp size table.
(Note 2) Since the weight differs depending on the clamp size, the weight table shows ranges.
More Information
Clamp Size
| Size | Compatible Cable Finished Outer Diameter (mm) | Size | Compatible Cable Finished Outer Diameter (mm) | |
| 8 | Ø7.0 ~ 8.5 | 13 | Ø11.1 ~ 13.0 | |
| 9 | Ø8.0 ~ 9.4 | 14 | Ø12.5 ~ 14.0 | |
| 10 | Ø8.6 ~ 10.5 | 15 | Ø13.1 ~ 15.0 | |
| 11 | Ø9.5 ~ 11.0 | 16 | Ø14.1 ~ 16.0 | |
| 12 | Ø10.6 ~ 12.5 | 18 | Ø16.1 ~ 18.0 |
(Unit: mm)
| Shell Size | ØA | ØB | C | ØD | E |
| 16 | 22 | 13.0 | M18 x 1 | 24.0 | 50 |
| 20 | 26 | 16.6 | M22 x 1 | 26.5 | 60 |
| 24 | 30 | 20.8 | M26 x 1 | 29.0 | 67 |
| 28 | 34 | 25.0 | M30 x 1 | 32.0 | 72 |
Loading...
Waterproof Medium Type Connectors (NJW)
Features
● NJW series connectors are round metal connectors, designed to enhance water-proofing functionality when mated. (IPX7 equivalent)● Light weight and superior strength enhanced by zinc die cast material (aluminum die cast for the shell size 28 connectors).
● Some of the products in the NJW series are PSE certified under the Electrical Appliance and Material Safety Law, and therefore can be used safely as a power supply.
● There are 3 types of connectors: Straight, relay, and panel mount connectors.
● Because these connectors are connected by soldering, no dedicated tool is required for wiring.
Common Specifications
Materials / Finish
| Item | Materials | Finish |
|---|---|---|
| Shell / Dustproof Cap | Zinc or Aluminum Alloy (shell size 28) |
Chrome Plated or special chemical processing |
| Insulator | Synthetic Resin | - |
| Contact | Copper Alloy | Silver Plating |
| Rubber Packing | Synthetic Rubber | - |
Characteristics
| Item | Contents |
|---|---|
| Rated Current | Check with the table below. |
| Rated Voltage | Check with the table below. |
| Peak Voltage | No abnormality such as short circuiting occurs when regulated voltage is applied for 1 minute between immediately adjacent conductors. |
| Insulation Resistance | 1,000 MΩ or higher when measured between immediately adjacent conductors with regulated voltage. |
| Contact Resistance | Conductor resistance is 5 mΩ or less when a pair of contacts are connected at up to the regulation length. |
| Vibration Resistance | No functional defect was found during the JIS C 5025 vibration test. Contact resistance is 5 mΩ or less. |
| Impact Resistance | No functional defect was found during the JIS C 5026 shock test. Contact resistance is 5 mΩ or less. |
| Repeated Operation | No functional defect was found when a removal and insertion sequence was tested 500 times. Contact resistance is 5 mΩ or less. |
| Humidity Resistance | No functional defect was found during the JIS C 5023 humidity test. Insulation resistance is 100 MΩ. |
| Temperature Cycle | No functional defect was found during the JIS C 5030 temperature cycle test. |
| Corrosion Resistance | No functional defect was found during the JIS C 5028 salt water spray test. Contact resistance is 5 mΩ or less. |
| Waterproofing | No abnormality such as flooding was found when left under water pressure of 0.4 kgf/cm2 at regular working conditions for 24 hours or more. |
| Operating Temperature Range | -25°C ~ +85°C |
Table of Basic Specifications
| Product No. | Shell Size |
Number of Cores | Shape Symbol | Rated Current (A or less) |
Rated Voltage (V or less) |
Peak Voltage AC (V) |
Insulation Resistance (MΩ or higher) |
Contact Resistance (mΩ or less) |
Compatible Wire Size | Applicable Electric Wire Finished Outer Diameter (mm) Note 1 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| AWG | Conductor Section Area mm2 | ||||||||||
| NJW | 16 | 3 | PF, RM, ADM |
10 | 125 | 1,500 | 2,000 | 3 | 16 | 1.25 | 8.0 ~ 11.0 |
| 5 | 5 | 1,000 | 1,000 | 5 | 20 | 0.5 | |||||
| 16 | 3 | PM, RF, ADF |
10 | 125 | 1,500 | 2,000 | 3 | 16 | 1.25 | 8.0 ~ 11.0 | |
| 5 | 5 | 1,000 | 1,000 | 5 | 20 | 0.5 | |||||
| 20 | 2, 3 | PF, RM, ADM |
15 | 250 | 1,500 | 2,000 | 3 | 14 | 2 | 7.0 ~ 12.5 | |
| 4, 5 | 10 | 16 | 1.25 | ||||||||
| 7 | 1,000 | ||||||||||
| 12 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
| 20 | 2, 3 | PM, RF, ADF |
15 | 250 | 1,500 | 2,000 | 3 | 14 | 2 | 7.0 ~ 12.5 | |
| 4, 5 | 10 | 16 | 1.25 | ||||||||
| 7 | 1,000 | ||||||||||
| 12 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
| 24 | 2, 3 | PF, RM, ADM |
20 | 250 | 1,500 | 5,000 | 3 | 12 | 3.5 | 9.5 ~ 15.0 | |
| 4, 5 | 15 | 14 | 2 | ||||||||
| 10 | 10 | 1,000 | 2,000 | 16 | 1.25 | ||||||
| 14, 16 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
| 24 | 2, 3 | PM, RF, ADF |
20 | 250 | 1,500 | 5,000 | 3 | 12 | 3.5 | 9.5 ~ 15.0 | |
| 4, 5 | 15 | 14 | 2 | ||||||||
| 10 | 10 | 1,000 | 2,000 | 16 | 1.25 | ||||||
| 14, 16 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
| 28 | 16 | PF, RM, ADM |
10 | 250 | 1,000 | 2,000 | 3 | 16 | 1.25 | 12.5 ~ 18.0 | |
| 24 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
| 28 | 16 | PM, RF, ADF |
10 | 250 | 1,000 | 2,000 | 3 | 16 | 1.25 | 12.5 ~ 18.0 | |
| 24 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
Note 1: Even connectors with the same shell sizes may be divided into 2 or 3 types depending on the thickness of the cable used. Take care at selection. Refer to each product page for further details.
Contact Arrangement Diagram
Connection Work Method
Basic Information
| Connector shape | Round Model | Connector series initials | M / N / O | MNO | NJW |
|---|---|---|---|---|---|
| Application | Cable-to-cable | Wire connection method | Solder | Connection direction | Straight |
| IP Rating | Yes | Detaching Method | Others |
Specification/Dimensions
-
Applicable pin/contact
- Male (Plug)
- Female (Socket)
-
Number of cores
-
Allowable Current(A)
-
Allowable Voltage(V)
-
Representative standards
- PSE
-
Shell Size
-
Compatible Cable Finished Outer Diameter(Φ mm)
-
CAD
- 2D
Days to Ship
-
- All
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- NCS Series Circular Connector - Conduit
- NWPC Series Circular Connector - Waterproof, Relay Adapter
- Circular Connector - DIN, Plug-In, Panel Mount, Receptacle
- JN1 Series Circular Connector - Waterproof, One-Touch Lock, Flanged Panel Mount, Plug
- SAI Series Circular Connector - M12, Plug
- THB390L/401L Series Circular Connector - Waterproof, Angled, Relay
- XLR Series Circular Connector - One-Touch Lock, Plug
- XLR Series Small Circular Connector - Flanged Panel Mount
Complementary Products
-
MMS3102 Series Circular Connector - Waterproof, MIL-Spec, Flanged Panel Mount, Receptacle
MISUMI Days to Ship : 8 Days or more
-
NJC Series Circular Connector - JIS Compliant, Flanged Panel Mount
MISUMI Days to Ship : Same day or more
-
NJC Series Circular Connector - Metal
Nanaboshi Electric Manufacturing Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy