(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

General-purpose Connectors (Part Numbers)

General-purpose Connectors

Harness using connectors manufactured by DDK.

  • Relay
  • Printer
  • Flexible
  • EMI Countermeasure
  • Solder
  • Gold Plated
  • Small Diameter

● Cables that feature the Centronics connector that can be used for connections of various control devices and printers, etc.


· It cannot be connected with the screw lock model.
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.
· The shield is connected to the hood.
· The combination of the Centronics connector and other connectors' combination cables can be handled with the "Web Design Harness Plus."


Wiring and Wire Color Page
>>Click here
Component Page
>>Click here

Specifications



Generic Connectors:Related Image
L (m)~ 0.91 ~ 44.1 ~ 50
Tolerance+20mm+50mm+ 3% of Total Length
* The tolerance of the specified length is as described above.

Connector TypeShape Specification TypeOutline Image DrawingCable TypeNumber of CoresSpecified Length (m)
DCEN
EMI Countermeasure Type
Solder Type
Connector
Spring Lock Type

DDK
P
(Male)
Generic Connectors:Related ImageGeneric Connectors:Related Image

Generic Connectors:Related Image

Generic Connectors:Related Image

Generic Connectors:Related Image
Generic Connectors:Related Image
140.2

~

50


Can be specified by
0.1m
increments
24
36
50
S
(Female for Relay)
Generic Connectors:Related Image14
24
36
50
PP
(Male / Male)
Generic Connectors:Related Image14
24
36
50
SS
(Female for Relay / Female for Relay)
Generic Connectors:Related Image14
24
36
50
PS
(Male /
Female for Relay)
Generic Connectors:Related Image14
24
36
50
* - is not available.

Connector TypeShape Specification TypeOutline Image Drawing (Unit: mm)Cable TypeNumber of CoresSpecified Length (m)
DCEN
EMI Countermeasure Type
Solder Type Connector
Spring Lock Type

DDK
PY
(Male / Y Terminal)
With Pin No. Insertion Mark Tube
Generic Connectors:Related ImageGeneric Connectors:Related Image
Generic Connectors:Related Image
Generic Connectors:Related Image
Generic Connectors:Related Image
Generic Connectors:Related Image
14
0.2

~

50

Can be specified by
0.1m
increments
24
36
50
SY
(Female for Relay / Y Terminal)
With Pin No. Insertion Mark Tube
Generic Connectors:Related Image14
24
36
50
PT
(Male / Loose Wires)
With Pin No. Insertion Mark Tube
Generic Connectors:Related Image14
24
36
50
ST
(Female for Relay /
Loose Wires)
With Pin No. Insertion Mark Tube
Generic Connectors:Related Image14
24
36
50
* - is not available.
Part Number
Part NumberMinimum order quantityVolume DiscountDays to Ship CN1 CN2 Number of cores Cable Rated Voltage
(V)
Shield Cable Color AWG Environment Resistant Bend Resistant Cable Type Specified Length
(m)

Loading...

Material / Finish

Soldering Type, Gender Changer
Item Materials Finish
Insulator (RC Type) Glass-Filled Polybutylene
Terephthalate
UL94V-0, Blue
Insulator (Type 57, Angle Type) DAP Resin UL94V-0, Blue
Contact Copper Alloy Nickel Base Gold Plating
Shell Steel Nickel-plated
Hood (Angle Type Only) Aluminum Alloy Rustproofing Treatment
Spring Latch Stainless Steel -

Soldering Type
Pressure Welding Type
Item Materials Finish
Insulator PC Resin UL94V-0, Blue
Contact Copper Alloy Nickel Base Gold Plating
Shell
(57FE-40 only)
Brass Nickel-plated
Strain Relief PC Resin UL94V-0, Blue
Earth Plate
(57FE-30 only)
Brass Nickel-plated
Spring Latch
(57FE-40 only)
Stainless Steel -
Metal Hood
(57FE-30 only)
Aluminum Alloy Rustproofing Treatment

Pressure Welding Type

* 57F series is made up of 4 components: insulator, contact, strain relief, and pressure welding cover.

Compatible Wire

Connector Type Single Wire Conductor Diameter Stranded Wire Conductor Cross-sectional Area AWG Size
Soldering Type 0.65 mm or less 0.2 mm2 or less Stranded Wire AWG24 or less
Single Wire AWG22 or less
Pressure Welding Type - - AWG26 (Single Wire), AWG28 (Stranded Wire, Single Wire) or AWG30 (Single Wire) 1.27 mm Pitch Flat Cable

Electrical Properties

Item Soldering Type Pressure Welding Type
Rated Current 5 A or lower 1 A or lower
Rated Voltage 500 VAC or less 250 VAC or less
Contact Resistance 35 mΩ or less / 1 ADC 35 mΩ or less / 1 ADC
Insulation Resistance 1,000 MΩ or more / 500 VDC 1,000 MΩ or more / 500 VDC
Peak Voltage 1,000 VAC / minute 500 VAC / minute
Operating Temperature Range -55°C ~ +105°C -55°C ~ +105°C

Mechanical Properties

Item Characteristics Conditions
Insertion and Extraction Force Per Single Pole Insertion Force: 112 g or less, Extraction Force: 86 g or less When the plug and socket are inserted and extracted, the total extraction force is divided by each core number to convert into force per single pole
Vibration Resistance · No interruption to power supplies of 1 μs or more
· No abnormalities such as damage etc. on the connector
In compliance with MIL-STD-202 test method condition 204 A, simple vibration with smaller amplitude, either the total amplitude of 1.52 mm from 10 Hz to 500 Hz or 10 G (gravity units) is applied to each for 3 hours in mutually perpendicular 3-axis direction.
Impact Resistance No cracks in the connector or abnormalities such as loosening in breakable parts Impact of 50 G with duration 11 msec is applied to the coupled connector in mutually perpendicular axis direction.
Insertion and Removal Durability No mechanical damage Perform insertion and removal 500 times at speeds not exceeding 500 times per 1 hour.

Environmental Properties

Item Characteristics Conditions
Temperature Resistance There should be no physical damage or obstacle when inserting or removing the connector Repeatedly expose to temperatures +85°C and -55°C for 30 minutes 5 times each. However, do not expose to room temperature for 5 minutes or more when moving from low temperature to high and from high temperature to low.
Humidity Resistance · There should be no mechanical damages
· Voltage Resistance 300 VAC 1 minute
Perform 96-hour humidity test with the connector detached in compliance with MIL-STD-202 test method 103 B.
Corrosion Resistance There should be no significant corrosion or obstacle when inserting or removing the connector After performing a 48-hour salt spray test with the connector attached in compliance with MIL-STD-202 test method condition 101 B, the connector is uncoupled, washed, and dried for 12 hours in a drying oven at 38°C.

Contact Arrangement Diagram


This diagram is a view of the socket (female) connector from the coupling.
The plug (male) will be reversed on the left and right.

Basic Information

Connector type Centronics Connector manufacturer DDK Connector shape Straight
Processing method Solder Cable shape Round Hood EMI Protection Metal
Cable Standard (UL / CSA) UL Twisted pair Included Connector Anchoring Method Spring-lock

Additional Products in this Category

Complementary Products

Tech Support