(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Rectangular Connectors - D-Sub, PCB Installation, Solder and Press Terminals (Part Numbers)

Rectangular Connectors - D-Sub, PCB Installation, Solder and Press Terminals

Click this image to zoom it.

Move the mouse over the image to zoom

  • Rectangular Connectors - D-Sub, PCB Installation, Solder and Press Terminals
  • Rectangular Connectors - D-Sub, PCB Installation, Solder and Press Terminals
  • Rectangular Connectors - D-Sub, PCB Installation, Solder and Press Terminals
  • Rectangular Connectors - D-Sub, PCB Installation, Solder and Press Terminals
  • Volume Discount

D-sub Connector for PCB Mounting. Horizontal mounting type makes it ideal for taking wiring out from the circuit.

  • For Signal


● Angle model connectors that allow the circuit to be removed in parallel with the printed circuit board.
● Includes grounding lugs that can be fixed to base boards and 5.8 mm hex screws (for securing connections to third party products) with just a single touch.

Rated Current Rated Voltage Contact Resistance Insulation Resistance Peak Voltage Insertion and Removal Durability Operating Temperature
3A 300V AC Below 20 mΩ 1,000 MΩ or more 1,000 AC 100 Times -25 – 105°C
5A 300V AC 15 mΩ or less 1,000 MΩ or more 1,000 AC 200 Times -55 – 105°C




· It can also be connected with other manufacturers' D-sub connectors, but check the dimensions and properties before use.

Specifications

Dsub Connector, Solder and Press-fit (PCB Mountable):Related Image

Model Number Number of Cores Type Weight
g
XM2C-0942-132L 9 Male
(Pin)
8.7
XM2C-1542-132L 15 11.0
XM2C-2542-132L 25 14.0
XM4K-1542-132 High-Density 15 10.0
XM3B-0942-132L 9 Female
(Socket)
9.7
XM3B-1542-132L 15 12.0
XM3B-2542-132L 25 17.0
XM4L-1542-132 High-Density 15 11.0

 

Model Number
(Low Cost)
Number of Cores Type Weight
g
DX-09P-BB 9 Male 8.3
DX-15P-BB 15 10.4
DX-25P-BB 25 13.5
DX-09S-BB 9 Female 8.5
DX-15S-BB 15 11
DX-25S-BB 25 15

More Information

Dsub Connector, Solder and Press-fit (PCB Mountable):Related Image

Material / Finish

Item Material Finish
Contact Male: Brass Gold Over Nickel
Flash Plating
Female: Phosphor Bronze
Insulator Glass Fiber Reinforced PBT Resin UL94V-0, Black
Shell Steel Nickel-plated
Hex Screw Bracket Brass Nickel-plated
Earth Lug Brass Tin Alloy Plating

*The material for DX series (low cost) contacts is brass for both male and female.

Part Number
DX-09P-BB
DX-09S-BB
DX-15P-BB
DX-15S-BB
DX-25P-BB
DX-25S-BB
XM3B-2542-132L
Part NumberMinimum order quantityVolume DiscountDays to Ship Applicable pin/contact Cores Application Allowable Current
(A)
Allowable Voltage
(V)
Wire connection method Connection direction Peak Voltage
(Vmax)
Type Detaching Method
1 Piece(s)Available

8 Days or more

-9--------
1 Piece(s)Available

8 Days or more

-9--------
1 Piece(s)Available

8 Days or more

-15--------
1 Piece(s)Available

8 Days or more

-15--------
1 Piece(s)Available

8 Days or more

-25--------
1 Piece(s)Available

8 Days or more

-25--------
1 Piece(s)Available

8 Days or more

Female (Socket)25Cable-to-board3300SolderAngle1000StandardOne-touch

Loading...

  1. 1

Compatible Wire Size

Connector Type Compatible Wire Size
AWG Size Conductor Cross-Sectional Area (mm2)
Solder Connection Type Finer than 20 Less than 0.53
Pressure Weld Connection Type 1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type 22 ~ 28 0.08 ~ 0.32
Terminal Block Built in Type 14 ~ 26 2.0 ~ 1.5
High Current Type For 10A 16 ~ 12 0.3 ~ 1.25
For 20A 12 ~ 18 0.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of Cores A±0.15 B±0.2 C±0.2
High Current Type High-density type Others
- 15 9 24.99 20.6 12.0
3 26 15 33.32 28.8 12.0
5 44 25 47.04 42.6 12.0
8 62 37 63.50 59.0 12.0
- 78 50 61.11 56.6 15.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of Cores A1 B1
9 24.99 22.00
15 33.32 30.30
25 47.04 44.00
37 63.05 60.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of Cores A2 B2
9 24.99 20.20
15 33.32 28.60
25 47.04 42.50
37 63.05 59.20

Contact Arrangement Diagram

Shell Size Group E A B C D
Standard Type
High-density type

Basic Information

Connector Shape Square Type Connector Series Initials D / E / F D/E/F Dsub
IP Rating N/A

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.