(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

High EMI Countermeasures Cable/High-density Dsub Selection Type

High EMI Countermeasures Cable/High-density Dsub Selection Type

Click this image to zoom it.

Move the mouse over the image to zoom

  • High EMI Countermeasures Cable/High-density Dsub Selection Type
  • High EMI Countermeasures Cable/High-density Dsub Selection Type

Cable that converts noise into heat is used

  • PLC
  • EMI Countermeasure
  • RS232
  • Solder
  • Gold Plated

● Features the D-sub connector that can be used for connection of various control devices, PCs, etc. Features two models of cables: the noiseBEAT cable that reduces noise by heat conversion, and the pair-shielded twisted pair cable that is aluminum foil coated.


· Please use within a range of 15 m or less if used in RS-232C communication.
· The noiseBEAT cable is a registered trademark of NTT Advanced Technology Corporation.
· The temperature increase by the heat conversion of the noise is roughly 0.1°C.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.
· Custom number for common crossover connection is available in RS-232C cables.
· High density (3-row) model for core number H15.


Wiring and Wire Color Page
>>Click here
Component Page
>>Click here

Specifications

High EMI Countermeasures Cable:Related Image

L (m)~ 0.91 ~ 44.1 ~ 50
Tolerance+20mm+50mm+ 3% of Total Length
* The tolerance of the specified length is as described above.

Connector TypeShape Specification TypeOutline Image DrawingCable TypeNumber of CoresSpecified Length (m)
SPEDJ
EMI Countermeasure
M2.6 Short Screw

Japan Aviation Electronics Industry, Limited




SPEDJL
EMI Countermeasure
M2.6 Long Screw

Japan Aviation Electronics Industry, Limited




SPEDU
EMI Countermeasure
#4-40 Short Screw

Japan Aviation Electronics Industry, Limited




SPEDUL
EMI Countermeasure
#4-40 Long Screw

Japan Aviation Electronics Industry, Limited
P
(Male)
High EMI Countermeasures Cable:Related ImageHigh EMI Countermeasures Cable:Related Image

High EMI Countermeasures Cable:Related Image
90.2

~

50
Can be specified
at 0.1 m
increments
15
H15
25
S
(Female)
High EMI Countermeasures Cable:Related Image9
15
H15
25
PP
(Male / Male)
High EMI Countermeasures Cable:Related Image9
15
H15
25
SS
(Female / Female)
High EMI Countermeasures Cable:Related Image9
15
H15
25
PS
(Male / Female)
High EMI Countermeasures Cable:Related Image9
15
H15
25

Connector TypeShape Specification TypeOutline Image Drawing (Unit: mm)Cable TypeNumber of CoresSpecified Length (m)
SPEDJ
EMI Countermeasure
M2.6 Short Screw

Japan Aviation Electronics Industry, Limited




SPEDJL
EMI Countermeasure
M2.6 Long Screw

Japan Aviation Electronics Industry, Limited




SPEDU
EMI Countermeasure
#4-40 Short Screw

Japan Aviation Electronics Industry, Limited




SPEDUL
EMI Countermeasure
#4-40 Long Screw

Japan Aviation Electronics Industry, Limited
PY
(Male / Y Terminal)
With Pin No. Insertion
Mark Tube
High EMI Countermeasures Cable:Related ImageHigh EMI Countermeasures Cable:Related Image

High EMI Countermeasures Cable:Related Image
90.2

~

50
Can be specified
at 0.1 m
increments
15
H15
25
SY
(Female / Y Terminal)
With Pin No. Insertion
Mark Tube
High EMI Countermeasures Cable:Related Image9
15
H15
25
PT
(Male / Loose Wires)
With Pin No. Insertion
Mark Tube
High EMI Countermeasures Cable:Related Image9
15
H15
25
ST
(Female / Loose Wires)
With Pin No. Insertion
Mark Tube
High EMI Countermeasures Cable:Related Image9
15
H15
25
Part Number
SPEDJ-P-B-9-[0.2-50/0.1]
SPEDJ-P-B-15-[0.2-50/0.1]
SPEDJ-P-B-25-[0.2-50/0.1]
SPEDJ-P-B-H15-[0.2-50/0.1]
SPEDJ-PP-B-9-[0.2-50/0.1]
SPEDJ-PP-B-15-[0.2-50/0.1]
SPEDJ-PP-B-25-[0.2-50/0.1]
SPEDJ-PP-B-H15-[0.2-50/0.1]
SPEDJ-PS-B-9-[0.2-50/0.1]
SPEDJ-PS-B-15-[0.2-50/0.1]
SPEDJ-PS-B-25-[0.2-50/0.1]
SPEDJ-PS-B-H15-[0.2-50/0.1]
SPEDJ-PT-B-9-[0.2-50/0.1]
SPEDJ-PT-B-15-[0.2-50/0.1]
SPEDJ-PT-B-25-[0.2-50/0.1]
SPEDJ-PT-B-H15-[0.2-50/0.1]
SPEDJ-PY-B-9-[0.2-50/0.1]
SPEDJ-PY-B-15-[0.2-50/0.1]
SPEDJ-PY-B-25-[0.2-50/0.1]
SPEDJ-PY-B-H15-[0.2-50/0.1]
SPEDJ-S-B-9-[0.2-50/0.1]
SPEDJ-S-B-15-[0.2-50/0.1]
SPEDJ-S-B-25-[0.2-50/0.1]
SPEDJ-S-B-H15-[0.2-50/0.1]
SPEDJ-SS-B-9-[0.2-50/0.1]
SPEDJ-SS-B-15-[0.2-50/0.1]
SPEDJ-SS-B-25-[0.2-50/0.1]
SPEDJ-SS-B-H15-[0.2-50/0.1]
SPEDJ-ST-B-9-[0.2-50/0.1]
SPEDJ-ST-B-15-[0.2-50/0.1]
SPEDJ-ST-B-25-[0.2-50/0.1]
SPEDJ-ST-B-H15-[0.2-50/0.1]
SPEDJ-SY-B-9-[0.2-50/0.1]
SPEDJ-SY-B-15-[0.2-50/0.1]
SPEDJ-SY-B-25-[0.2-50/0.1]
SPEDJ-SY-B-H15-[0.2-50/0.1]
SPEDJL-P-B-9-[0.2-50/0.1]
SPEDJL-P-B-15-[0.2-50/0.1]
SPEDJL-P-B-25-[0.2-50/0.1]
SPEDJL-P-B-H15-[0.2-50/0.1]
SPEDJL-PP-B-9-[0.2-50/0.1]
SPEDJL-PP-B-15-[0.2-50/0.1]
SPEDJL-PP-B-25-[0.2-50/0.1]
SPEDJL-PP-B-H15-[0.2-50/0.1]
SPEDJL-PS-B-9-[0.2-50/0.1]
SPEDJL-PS-B-15-[0.2-50/0.1]
SPEDJL-PS-B-25-[0.2-50/0.1]
SPEDJL-PS-B-H15-[0.2-50/0.1]
SPEDJL-PT-B-9-[0.2-50/0.1]
SPEDJL-PT-B-15-[0.2-50/0.1]
SPEDJL-PT-B-25-[0.2-50/0.1]
SPEDJL-PT-B-H15-[0.2-50/0.1]
SPEDJL-PY-B-9-[0.2-50/0.1]
SPEDJL-PY-B-15-[0.2-50/0.1]
SPEDJL-PY-B-25-[0.2-50/0.1]
SPEDJL-PY-B-H15-[0.2-50/0.1]
SPEDJL-S-B-9-[0.2-50/0.1]
SPEDJL-S-B-15-[0.2-50/0.1]
SPEDJL-S-B-25-[0.2-50/0.1]
SPEDJL-S-B-H15-[0.2-50/0.1]
Part NumberMinimum order quantityVolume DiscountDays to Ship Hood screw CN1 CN2 Number of cores Specified Length
(m)
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleEnd Piece90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleEnd Piece150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleEnd Piece250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleEnd PieceH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleMale90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleMale150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleMale250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleMaleH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleFemale90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleFemale150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleFemale250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleFemaleH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleLoose Wires90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleLoose Wires150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleLoose Wires250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleLoose WiresH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleY Terminal90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleY Terminal150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleY Terminal250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewMaleY TerminalH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleEnd Piece90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleEnd Piece150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleEnd Piece250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleEnd PieceH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleFemale90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleFemale150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleFemale250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleFemaleH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleLoose Wires90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleLoose Wires150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleLoose Wires250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleLoose WiresH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleY Terminal90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleY Terminal150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleY Terminal250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Short ScrewFemaleY TerminalH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleEnd Piece90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleEnd Piece150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleEnd Piece250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleEnd PieceH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleMale90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleMale150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleMale250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleMaleH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleFemale90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleFemale150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleFemale250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleFemaleH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleLoose Wires90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleLoose Wires150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleLoose Wires250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleLoose WiresH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleY Terminal90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleY Terminal150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleY Terminal250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewMaleY TerminalH150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewFemaleEnd Piece90.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewFemaleEnd Piece150.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewFemaleEnd Piece250.2 ~ 50
1 Piece(s)

9 Days or more

M2.6 Long ScrewFemaleEnd PieceH150.2 ~ 50

Loading...

Compatible Wire Size

Connector Type Compatible Wire Size
AWG Size Conductor Cross-Sectional Area (mm2)
Solder Connection Type Finer than 20 Less than 0.53
Pressure Weld Connection Type 1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type 22 ~ 28 0.08 ~ 0.32
Terminal Block Built in Type 14 ~ 26 2.0 ~ 1.5
High Current Type For 10A 16 ~ 12 0.3 ~ 1.25
For 20A 12 ~ 18 0.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of Cores A±0.15 B±0.2 C±0.2
High Current Type High-density type Others
- 15 9 24.99 20.6 12.0
3 26 15 33.32 28.8 12.0
5 44 25 47.04 42.6 12.0
8 62 37 63.50 59.0 12.0
- 78 50 61.11 56.6 15.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of Cores A1 B1
9 24.99 22.00
15 33.32 30.30
25 47.04 44.00
37 63.05 60.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of Cores A2 B2
9 24.99 20.20
15 33.32 28.60
25 47.04 42.50
37 63.05 59.20

Contact Arrangement Diagram

Shell Size Group E A B C D
Standard Type
High-density type

Basic Information

Connector type Dsub Connector manufacturer Japan Aviation Electronics Industry, Limited Connector shape Straight
Processing method Solder Cable shape Round Hood EMI Protection Plastic
Cable Rated Voltage(V) Less than 100 Shield Aluminum Foil + Braided Pair Double / Each Pair Aluminum Foil Cable Standard (UL / CSA) UL
Cable Color Navy Twisted pair Included AWG 25
Cable Type B

Additional Products in this Category

Complementary Products

Tech Support