(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
BASIC-Pro-MASTER series, small diameter, fixed signal cable rated to UL specification No. E214184. The cable is comprised of twisted-pair wiring with a braided shielding to promote excellent anti-electromagnetic interference performance (EMI Shielding). Its slim wire profile makes it perfect for use in fixed design applicaitons like control circuit wiring.
● Braid-shielded for EMI countermeasures.
The Electrical Appliance and Material Safety Law certificate has not been obtained.
· Be careful not to confuse specified length and quantity when ordering.
· 1P = 2-core (twisted pair).
· Not oil-resistant.
· This product is compatible with "UL Traceability Program / Processed Wire." (c-UL is not compatible)
* For cables in stock, please keep in mind that because we cut them to the specified size, they cannot be canceled or returned.
* Color and softness may vary slightly due to manufacturer changes.
The Electrical Appliance and Material Safety Law certificate has not been obtained.
Part Number
Configured Part Number is shown.
MAST-UL20276SB-28-8P-15
* Before ordering, confirm that the following symbols in the order (if any) are correct: "( = single-byte bracket"; "1 = One"; "I = i"; "0 = zero"; "O = oh".
1 Piece Unit 1 Roll Unit
Model Number | AWG Size | Number of Pairs 1P = 2 Cores |
Total Length or Specified Length |
MAST-UL20276SB | 28 | 5P | 1 - 100 (Specify 1 m Increment) |
8P | |||
10P | |||
13P | |||
17P | |||
20P | |||
25P | |||
34P | |||
50P |
Be sure to read the following precautions when you place an order.
For the latest information regarding standard unit price, quantity slide unit price, shipment days, etc., refer to the Misumi VONA e-catalog.
* Length in "m" is included in model numbers. Always specify quantity as number of units, not as meters.
* All listed unit prices above are per meter.
Unit Price Calculation Method [Formula: Last digits of model number (m) x unit price per meter above]
* Check the indications for number of cores, pair number, core / pair number, and pair number / core when ordering (check the Specification Table for number of wire cores). 1P (1 PS) is "x 2-core".
Sheath Color | Black |
Operating Temperature Range | 0 ~ 80°C |
Standard Acquired | ULAWM20276 |
Bending Radius | Finished Outer Diameter x 10 (Fixed Part) |
Structure Outline
Conductor | Tin Plated Annealed Copper Stranded Wire |
Insulator | Heat Resistant Vinyl |
Twisting | Twisted Pair |
Shield | Tin Plated Annealed Copper Braid |
Sheath | Heat-resistant Soft Vinyl / Matte |
Specifications
Model Number | AWG Size |
Number of Pairs 1P = 2 Cores |
Specified Length (m) |
Conductor | Insulation Thickness (mm) |
Wire Core Outer Diameter Approx. (mm) |
Sheath Thickness (mm) |
Finished Outer Diameter (mm) |
Electrical Properties | Approximate Mass kg/km |
||||
Structure Strands / mm |
Outer Diameter Approx. mm |
Conductor Resistance Ω/km (20 °C) |
Insulation Properties MΩkm (20°C) |
Peak Voltage V / Min |
Allowable Current A (30 °C) |
|||||||||
MAST-UL20276SB | 28 * (0.08 mm2) |
5P | 1 ~ 100 (Specify 1 m Increment) |
7/0.127 | 0.38 | 0.1 | 0.58 | 0.81 | 5.1 | 246 or less | 10 or more | 500 | 1.1 | 41 |
8P | 5.5 | 0.9 | 51 | |||||||||||
10P | 6 | 63 | ||||||||||||
13P | 6.7 | 0.7 | 75 | |||||||||||
17P | 7.2 | 0.6 | 86 | |||||||||||
20P | 7.6 | 96 | ||||||||||||
25P | 8.1 | 0.5 | 110 | |||||||||||
34P | 9 | 134 | ||||||||||||
50P | 10.4 | 0.4 | 182 |
Be sure to read the following precautions when you place an order.
For the latest information regarding standard unit price, quantity slide unit price, shipment days, etc., refer to the Misumi VONA e-catalog.
* Length in "m" is included in model numbers. Always specify quantity as number of units, not as meters.
* All listed unit prices above are per meter.
Unit Price Calculation Method [Formula: Last digits of model number (m) x unit price per meter above]
* Check the indications for number of cores, pair number, core / pair number, and pair number / core when ordering (check the Specification Table for number of wire cores). 1P (1 PS) is "x 2-core".
* Allowable current is to be used only as a reference value and is not guaranteed.
Current Reduction Factor
Ambient Temperature (°C) | 30 | 40 | 50 | 60 | 70 |
Current Reduction Factor | 1 | 0.89 | 0.77 | 0.63 | 0.45 |
Wire Core Identification Table
Pair No. | Insulator Color |
Dot Mark | Dot Mark Color | Pair No. | Insulator Color |
Dot Mark (Dash *) |
Dot Mark Color | ||
Core of Wire 1 | Core of Wire 2 | Core of Wire 1 | Core of Wire 2 | ||||||
1 | Orange | ■ | Black | Red | 26 | Orange | ■■ | Black | Red |
2 | Gray | ■ | Black | Red | 27 | Gray | ■■ | Black | Red |
3 | White | ■ | Black | Red | 28 | White | ■■ | Black | Red |
4 | Yellow | ■ | Black | Red | 29 | Yellow | ■■ | Black | Red |
5 | Pink | ■ | Black | Red | 30 | Pink | ■■ | Black | Red |
6 | Orange | ■■ | Black | Red | 31 | Orange | ■■■■ | Black | Red |
7 | Gray | ■■ | Black | Red | 32 | Gray | ■■■■ | Black | Red |
8 | White | ■■ | Black | Red | 33 | White | ■■■■ | Black | Red |
9 | Yellow | ■■ | Black | Red | 34 | Yellow | ■■■■ | Black | Red |
10 | Pink | ■■ | Black | Red | 35 | Pink | ■■■■ | Black | Red |
11 | Orange | ■■■ | Black | Red | 36 | Orange | ■■■■■■ | Black | Red |
12 | Gray | ■■■ | Black | Red | 37 | Gray | ■■■■■■ | Black | Red |
13 | White | ■■■ | Black | Red | 38 | White | ■■■■■■ | Black | Red |
14 | Yellow | ■■■ | Black | Red | 39 | Yellow | ■■■■■■ | Black | Red |
15 | Pink | ■■■ | Black | Red | 40 | Pink | ■■■■■■ | Black | Red |
16 | Orange | ■■■■ | Black | Red | 41 | Orange | ■■■■■■■■ | Black | Red |
17 | Gray | ■■■■ | Black | Red | 42 | Gray | ■■■■■■■■ | Black | Red |
18 | White | ■■■■ | Black | Red | 43 | White | ■■■■■■■■ | Black | Red |
19 | Yellow | ■■■■ | Black | Red | 44 | Yellow | ■■■■■■■■ | Black | Red |
20 | Pink | ■■■■ | Black | Red | 45 | Pink | ■■■■■■■■ | Black | Red |
21 | Orange | ■■■■■■ (consecutive) | Black | Red | 46 | Orange | ■■■■■■■■■■ | Black | Red |
22 | Gray | ■■■■■■ (consecutive) | Black | Red | 47 | Gray | ■■■■■■■■■■ | Black | Red |
23 | White | ■■■■■■ (consecutive) | Black | Red | 48 | White | ■■■■■■■■■■ | Black | Red |
24 | Yellow | ■■■■■■ (consecutive) | Black | Red | 49 | Yellow | ■■■■■■■■■■ | Black | Red |
25 | Pink | ■■■■■■ (consecutive) | Black | Red | 50 | Pink | ■■■■■■■■■■ | Black | Red |
Conductor cross section(mm2) | 0.38 | AWG size(AWG) | 28 | Rated voltage | 30 V |
---|---|---|---|---|---|
Shield | Yes | Representative standards | UL | Sheath Color | Black |
Sheath Material | PVC | Insulation body materials | PVC | Power supply/signal | For Power Supply |
Please check the type/dimensions/specifications of the part MAST-UL20276SB-28-8P-15 in the AWG28 MAST-UL20276SB UL20276 Compatible UL-Standard Shielded Wire series.
Part Number |
---|
MAST-UL20276SB-28-10P-11 |
MAST-UL20276SB-28-10P-12 |
MAST-UL20276SB-28-10P-13 |
MAST-UL20276SB-28-8P-16 |
MAST-UL20276SB-28-8P-17 |
MAST-UL20276SB-28-8P-18 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy