How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Mitsubishi PLC-Supporting, Q-Series Angle Harnesses

Space-saving achieved. PLC-compatible angle harness.

PLC
MISUMI Original

● Knurled screws can be tightened by hand.
● Cable is compatible with both straight and angled leading.
● Mark bands / mark seals are unnecessary due to the marking plates on standard equipment.
● Wiring is easy thanks to cables with diameter thinness 35% that of conventional cables.

· The cable is pulled out downward from the PLC.
· Special wiring and mark tube printed contents are in accordance with PLC signal names when "-X-○○○○○○○" custom number is added.
· Add the custom number for "-X-○○○○○○○" even when ordering the angle model / product model with differing shapes.
(Straight connection or pin number printing when there is no custom number.)

Part Number

Enter Part Number

To confirm with applicable discounts and Days to ship, please quote.

Product specification

Specifications

How to Order
(1) Choose the corresponding harness model from the PLC unit and harness shapes found in the table below.
(2) Specify the model (length) in increments of 0.1 m, as the round cable can be 0.2 m ~ 50 m and the loose wire 0.2 m ~ 10 m.
* Be sure to specify the full model number when the model number listed in the table includes "-X-○○○○○○○" as this indicates that the cable is either special wiring or has signal name mark tube printing.
(Straight connection or pin number printing when there is no custom number)

Mitsubishi PLC-Supporting, Q-Series Angle Harnesses:Related Image

Connector Type	Shape Specification Type	Mating Surfaces and Wiring Direction	Outline Image Drawing (Unit: mm)	Cable Type	Specified Length (m)


NA40FM Solder Type Connector M2.6 Knurled Screw Type Lock Type Black Color (FCN 40-core Female) Misumi Original	S (Female)		Straight Lead		0.2 ~ 50 Can be specified by 0.1 m increments
	SMIL (Female / MIL40-core Female)		Straight Lead
	SS (Female / Female)		Straight Lead
	SY (Female / Y Terminal) With Pin No. Insertion Mark Tube		Straight Lead
	ST (Female / Loose Wires) With Pin No. Insertion Mark Tube		Straight Lead
	SA (Female Angle)		Angled Lead
	SB (Female Angle)		Angled Lead
	SAMIL (Angled Female / MIL 40-core Female)		Angled Lead
	SBMIL (Angled Female / MIL 40-core Female)		Angled Lead
	SAS (Female / Female)		Angled Lead
	SBS (Female / Female)		Angled Lead
	SAY (Female / Y Terminal) With Pin No. Insertion Mark Tube		Angled Lead
	SBY (Female / Y Terminal) With Pin No. Insertion Mark Tube		Angled Lead
	SAT (Female / Loose Wires) With Pin No. Insertion Mark Tube		Angled Lead
	SBT (Female / Loose Wires) With Pin No. Insertion Mark Tube		Angled Lead