(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Timing Pulleys - High Torque, MR5 Series, Power Grip® GT3.
- New Products
- Volume Discount
•Belt Shape : MR5(for PowerGrip® GT®3)
•Pulley Shape : Shape A, Shape B
•Material : Aluminum Alloy, Steel
•Type : Timing Pulleys
For complete product overview and details on MR5 Timing Pulley - High Torque, 5mm PowerGrip® GT®3 (MISUMI) see the sections below:
- inCAD Components
(i)Caution
- Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Part Number
Configured Part Number is shown.
[ ! ]For Keyway Dimension Details, Click here
| Type | Belt Width | Material*1 | Surface Treatment | Attachment*1 Setscrews | ||
| 15mm | 25mm | Pulley | Flange | |||
| MR5150 | MR5250 | |||||
| GPA | ● | ● | Aluminum Alloy | Aluminum Alloy | Clear Anodize | Stainless |
| GPB | ● | ● | Black Anodize | |||
| GPK | ● | ● | Hard Clear Anodize*2 | |||
| GPT | ● | ● | 1045 Carbon Steel or Equivalent | Low Carbon Steel | - | Steel (Black Oxide) |
| GPM | ● | ● | Black Oxide | |||
| GPP | ● | ● | Electroless Nickel Plating | |||
*1 Flanges are installed. Set screws are included with PU, NU & C bore hole specification.
*2 Hard Anodize Treatment: Film Hardness 300HV~
■Teeth No. Size
| mm | Teeth No. | |||||||||||||||||||||||||
| 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 44 | 45 | 48 | 50 | 52 | 56 | 60 | 64 | 68 | 72 | |
| P.D. | 28.65 | 30.24 | 31.83 | 33.42 | 35.01 | 36.61 | 38.2 | 39.79 | 41.38 | 44.56 | 47.75 | 50.93 | 54.11 | 57.3 | 60.48 | 63.66 | 70.03 | 71.62 | 76.39 | 79.58 | 82.76 | 89.13 | 95.49 | 101.86 | 108.23 | 114.59 |
| O.D. | 27.51 | 29.1 | 30.69 | 32.28 | 33.87 | 35.47 | 37.06 | 38.65 | 40.24 | 43.42 | 46.61 | 49.79 | 52.97 | 56.16 | 59.34 | 62.52 | 68.89 | 70.48 | 75.25 | 78.44 | 81.62 | 87.99 | 94.35 | 100.72 | 107.09 | 113.45 |
| D | 19 | 19 | 19 | 24 | 24 | 27 | 27 | 27 | 31 | 32 | 33 | 37 | 40 | 40 | 47 | 47 | 50 | 50 | 60 | 63 | 63 | 75 | 75 | 75 | 90 | 90 |
| F | 33 | 36 | 36 | 40 | 40 | 45 | 45 | 45 | 48 | 48 | 52 | 55 | 61 | 61 | 67 | 67 | 74 | 74 | 83 | 87 | 87 | 99 | 99 | 104 | 119 | 119 |
| E | 22 | 24 | 24 | 27 | 27 | 30 | 30 | 30 | 35 | 35 | 36 | 40 | 45 | 45 | 50 | 50 | 58 | 58 | 63 | 67 | 67 | 80 | 80 | 84 | 100 | 100 |
■Belt Width Size
| mm | Belt Width | |
| MR5150 | MR5250 | |
| A | 18.0 | 28.0 |
| W | 23.0 | 33.0 |
| L | 35.0 | 45.0 |
Specifications
| Part Number | Pulley Shape | Shaft Bore Specs., I.D. | Z | J | Q | R | S | T | |||||||||
| (Shaft Bore Specs.: H, P, N, C) | GPA20MR5150 | - | A | H6 | |||||||||||||
| (Shaft Bore Specs.: V, F) | GPT40MR5250 | - | B | - | V6 | - | Z10 | - | J5 | ||||||||
| (Shaft Bore Specs: Y) | GPM60MR5250 | - | B | - | Y8 | - | Q12 | - | R12 | - | S3 | - | T3 |
| ◆mm | ◆inch | |||||||||||||||||||||||
| Part Number | Pulley Shape |
Pulley Shape | Pulley Shape | |||||||||||||||||||||
| Type | Teeth No |
Belt Width | A | B・K | A | B | ||||||||||||||||||
| Shaft Bore Spec. (1mm Increment) | Shaft Bore Spec. (1mm Increment) | Shaft Bore Spec. (1mm Increment) | ||||||||||||||||||||||
| H(d) | P(d) | N(d)・C(d) | V | Y | H(d) | P(d) | N(d)・C(d) | V・F | HU(d) | PU(d) | NU(d) | HU(d) | PU(d) | NU(d) | ||||||||||
| Round Hole | Round Hole+Tap | Keywayed Bore + Tap | Stepped Hole | Both Ends Stepped Hole | Round Hole | Round Hole+Tap | Keywayed Bore + Tap | Stepped Hole | Inch Round Hole | Inch Round Hole+Tap | Inch New JIS Key Groove Hole + Tap | Inch Round Hole | Inch Round Hole+Tap | Inch New JIS Key Groove Hole + Tap | ||||||||||
| V(d) | Z | J | Y(d) | Q・R | S・T | V(d)・ F(d) |
Z | J | ||||||||||||||||
| Z-d≥2 | (0.1mm increment) | Q(R)-d≥2 | (0.1mm increment) | Z-d≥2 | (0.1mm increment) | |||||||||||||||||||
| Al GPA GPB GPK Fe GPT GPM GPP |
18 | MR5150 *A : 18.0 *W : 23.0 *L : 35.0 MR5250 *A : 28.0 *W : 33.0 *L : 45.0 |
A B |
6~18 | 6~12 | 8~12 | 6~16 | 8~18 | 2.0≤J≤W-2.0 | 6~16 | 8~18 | 3~14 S+T≤W-3 |
6~15 | 6~11 | 8・10・NK10 | 6~13 | 8~15 | 2.0≤J≤L-2.0 | C-G | C-E | D・E | C-F | C-E | D・E |
| 19 | 6~20 | 6~16 | 8~16 | 6~18 | 8~20 | 6~18 | 8~20 | 6~15 | 6~11 | 8・10・NK10 | 6~13 | 8~15 | C-H | C-G | D-G | C-F | C-E | D・E | ||||||
| 20 | 6~20 | 6~16 | 8~16 | 6~18 | 8~20 | 6~18 | 8~20 | 6~15 | 6~11 | 8・10・NK10 | 6~13 | 8~15 | C-H | C-G | D-G | C-F | C-E | D・E | ||||||
| 21 | 6~20 | 6~16 | 8~16 | 6~18 | 8~20 | 6~18 | 8~20 | 6~15 | 6~11 | 8・10・NK10 | 6~13 | 8~15 | C-H | C-G | D-G | C-F | C-E | D・E | ||||||
| 22 | 7~23 | 7~18 | 8~18 | 7~21 | 9~23 | 7~21 | 9~23 | 7~20 | 7~16 | 8~12 | 7~18 | 9~20 | D-J | D-G | D-G | D-H | D-G | D・E | ||||||
| 23 | 7~23 | 7~18 | 8~18 | 7~21 | 9~23 | 7~21 | 9~23 | 7~20 | 7~16 | 8~12 | 7~18 | 9~20 | D-J | D-G | D-G | D-H | D-G | D・E | ||||||
| 24 | 7~26 | 7~20 | 8~20 | 7~24 | 9~26 | 7~24 | 9~26 | 7~23 | 7~17 | 8~13 | 7~21 | 9~23 | D-K | D-H | D-H | D-J | D-G | D-F | ||||||
| 25 | 7~26 | 7~20 | 8~20 | 7~24 | 9~26 | 7~24 | 9~26 | 7~23 | 7~17 | 8~15 | 7~21 | 9~23 | D-K | D-H | D-H | D-J | D-G | D-F | ||||||
| 26 | 8~31 | 8~23 | 8~22 | 8~29 | 10~31 | 8~29 | 10~31 | 8~27 | 8~21 | 8~17 | 8~25 | 10~27 | E-L | E-J | E-J | E-K | E-H | E-G | ||||||
| 28 | 8~31 | 8~24 | 8~24 | 8~29 | 10~31 | 8~29 | 10~31 | 8~28 | 8~22 | 8~18 | 8~26 | 10~28 | E-L | E-J | E-K | E-K | E-H | E-G | ||||||
| 30 | 10~32 | 10~26 | 10~26 | 10~30 | 12~32 | 10~30 | 12~32 | 10~29 | 10~23 | 10~18 | 10~27 | 12~29 | F-L | F-K | F-K | F-K | F-J | F-G | ||||||
| 32 | 10~36 | 10~28 | 10~28 | 10~34 | 12~36 | 10~34 | 12~36 | 10~33 | 10~27 | 10~22 | 10~31 | 12~33 | F-L | F-K | F-K | F-L | F-K | F-H | ||||||
| 34 | 10~41 | 10~33 | 10~33 | 10~39 | 12~41 | 10~39 | 12~41 | 10~36 | 10~30 | 10~25 | 10~34 | 12~36 | F-N | F-L | F-L | F-M | F-K | F-K | ||||||
| 36 | 10~41 | 10~33 | 10~33 | 10~39 | 12~41 | 10~39 | 12~41 | 10~36 | 10~30 | 10~25 | 10~34 | 12~36 | F-N | F-L | F-L | F-M | F-K | F-K | ||||||
| 38 | 10~41 | 10~33 | 10~33 | 10~39 | 12~41 | 10~39 | 12~41 | 10~36 | 10~30 | 10~25 | 10~34 | 12~36 | F-N | F-L | F-L | F-M | F-K | F-K | ||||||
| 40 | 10~46 | 10~38 | 10~38 | 10~44 | 12~46 | 10~44 | 12~46 | 10~43 | 10~35 | 10~28 | 10~41 | 12~43 | F-Q | F-M | F-M | F-P | F-M | F-K | ||||||
| 44 | 12~54 | 12~42 | 12~40 | 12~52 | 14~54 | 12~52 | 14~54 | 12~46 | 12~38 | 12~32 | 12~44 | 14~46 | F-N | F-P | F-N | F-Q | E-M | F-L | ||||||
| 45 | 12~54 | 12~42 | 12~40 | 12~52 | 14~54 | 12~52 | 14~54 | 12~46 | 12~38 | 12~32 | 12~44 | 14~46 | F-N | F-P | F-N | F-Q | E-M | F-L | ||||||
| 48 | 12~59 | 12~45 | 12~40 | 12~57 | 14~59 | 12~57 | 14~59 | 12~56 | 12~45 | 12~40 | 12~54 | 14~56 | F-S | F-Q | F-N | F-S | F-Q | F-N | ||||||
| 50 | 12~63 | 12~50 | 12~43 | 12~61 | 14~63 | 12~61 | 14~63 | 12~59 | 12~47 | 12~43 | 12~57 | 14~59 | F-S | F-R | F-P | F-S | F-Q | F-P | ||||||
| 52 | 12~63 | 12~50 | 12~43 | 12~61 | 14~63 | 12~61 | 14~63 | 12~59 | 12~47 | 12~43 | 12~57 | 14~59 | F-S | F-R | F-P | F-S | F-Q | F-P | ||||||
| 56 | 12~63 | 12~50 | 12~43 | 12~61 | 14~63 | 12~61 | 14~63 | 12~59 | 12~47 | 12~43 | 12~57 | 14~59 | F-S | F-R | F-P | F-S | F-Q | F-P | ||||||
| 60 | 12~76 | 12~50 | 12~50 | 12~74 | 14~76 | 12~74 | 14~76 | 12~71 | 12~50 | 12~50 | 12~69 | 14~71 | F-S | F-R | F-R | F-S | F-Q | F-R | ||||||
| 64 | 12~76 | 12~50 | 12~50 | 12~74 | 14~76 | 12~74 | 14~76 | 12~71 | 12~50 | 12~50 | 12~69 | 14~71 | F-S | F-R | F-R | F-S | F-Q | F-R | ||||||
| 68 | 12~76 | 12~50 | 12~50 | 12~74 | 14~76 | 12~74 | 14~76 | 12~71 | 12~50 | 12~50 | 12~69 | 14~71 | F-S | F-R | F-R | F-S | F-Q | F-R | ||||||
| 72 | 12~85 | 12~70 | 12~55 | 12~83 | 14~92 | 12~83 | 14~92 | 12~80 | 12~70 | 12~55 | 12~84 | 14~86 | F-S | F-S | F-S | F-S | F-S | F-S | ||||||
| Shaft Bore Dia. 9・51-54 are not available for Shaft Bore specification N. Shaft Bore Dia.6.35 are selectable for Shaft Bore specifications H, P, V. | ||||||||||||||||||||||||
| Shaft Bore Dia. 8, 9, 11, 13, 14, 17, 21-55 are not available for Shaft Bore specification C. | ||||||||||||||||||||||||
| Inch Bore Specifications | Inch Bore Specifications | Inch Bore Specifications | ||||||||||||||||||||
| No. | Decimal (Inch) |
Nominal (Inch) |
Decimal (mm) | Set Screw size |
b (W) (inch) |
t1 (T) (inch) |
No. | Decimal (Inch) |
Nominal (Inch) |
Decimal (mm) | Set Screw size |
b (W) (inch) |
t1 (T) (inch) |
No. | Decimal (Inch) |
Nominal (Inch) |
Decimal (mm) | Set Screw size |
b (W) (inch) |
t1 (T) (inch) |
||
| A | 0.125 | 1/8 | 3.175 | #5-40 | - | - | H | 0.750 | 3/4 | 19.050 | #10-32 | 3/16 | 0.837 | M | 1.375 | 1 3/8 | 34.925 | 5/16-18 | 5/16 | 1.518 | ||
| B | 0.188 | 3/16 | 4.763 | #5-40 | - | - | HJ | 0.813 | 13/16 | 20.638 | #10-32 | 3/16 | 0.900 | MN | 1.438 | 1 7/16 | 36.513 | 5/16-18 | 3/8 | 1.605 | ||
| C | 0.250 | 1/4 | 6.350 | #8-32 | - | - | J | 0.875 | 7/8 | 22.225 | 1/4-20 | 3/16 | 0.964 | N | 1.500 | 1 1/2 | 38.100 | 5/16-18 | 3/8 | 1.669 | ||
| D | 0.313 | 5/16 | 7.938 | #8-32 | 3/32 | 0.357 | JK | 0.938 | 15/16 | 23.813 | 1/4-20 | 1/4 | 1.051 | P | 1.625 | 1 5/8 | 41.275 | 5/16-18 | 3/8 | 1.796 | ||
| E | 0.375 | 3/8 | 9.525 | #8-32 | 3/32 | 0.421 | K | 1.000 | 1 | 25.400 | 1/4-20 | 1/4 | 1.114 | PQ | 1.688 | 1 11/16 | 42.863 | 5/16-18 | 3/8 | 1.859 | ||
| EF | 0.438 | 7/16 | 11.113 | #8-32 | 3/32 | 0.484 | KLA | 1.063 | 1 1/16 | 26.988 | 1/4-20 | 1/4 | 1.178 | Q | 1.750 | 1 3/4 | 44.450 | 5/16-18 | 3/8 | 1.922 | ||
| F | 0.500 | 1/2 | 12.700 | #8-32 | 1/8 | 0.56 | KLB | 1.125 | 1 1/8 | 28.575 | 1/4-20 | 1/4 | 1.241 | QR | 1.813 | 1 13/16 | 46.038 | 5/16-18 | 1/2 | 2.032 | ||
| FG | 0.563 | 9/16 | 14.288 | #8-32 | 1/8 | 0.623 | KLC | 1.188 | 1 3/16 | 30.163 | 1/4-20 | 1/4 | 1.304 | R | 1.875 | 1 7/8 | 47.625 | 5/16-18 | 1/2 | 2.096 | ||
| G | 0.625 | 5/8 | 15.875 | #10-32 | 3/16 | 0.709 | L | 1.250 | 1 1/4 | 31.750 | 1/4-20 | 1/4 | 1.367 | RS | 1.938 | 1 15/16 | 49.213 | 3/8-16 | 1/2 | 2.160 | ||
| GH | 0.688 | 11/16 | 17.463 | #10-32 | 3/16 | 0.773 | LM | 1.313 | 1 5/16 | 33.338 | 1/4-20 | 5/16 | 1.455 | S | 2.000 | 2 | 50.800 | 3/8-16 | 1/2 | 2.223 | ||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| GPB18MR5150-A-C[10,12] |
| GPB18MR5150-A-H6.35 |
| GPB18MR5150-A-H[6-18/1] |
| GPB18MR5150-A-HUC |
| GPB18MR5150-A-HUD |
| GPB18MR5150-A-HUE |
| GPB18MR5150-A-HUEF |
| GPB18MR5150-A-HUF |
| GPB18MR5150-A-HUFG |
| GPB18MR5150-A-HUG |
| GPB18MR5150-A-N[8,10,11,12] |
| GPB18MR5150-A-NK10 |
| GPB18MR5150-A-NUD |
| GPB18MR5150-A-NUE |
| GPB18MR5150-A-P6.35 |
| GPB18MR5150-A-P[6-12/1] |
| GPB18MR5150-A-PUC |
| GPB18MR5150-A-PUD |
| GPB18MR5150-A-PUE |
| GPB18MR5150-A-V6.35 |
| GPB18MR5150-A-V[6-16/1] |
| GPB18MR5150-A-Y[6-16/1] |
| GPB18MR5150-B-C10 |
| GPB18MR5150-B-F6.35 |
| GPB18MR5150-B-F[6-13/1] |
| GPB18MR5150-B-H6.35 |
| GPB18MR5150-B-H[6-15/1] |
| GPB18MR5150-B-HUC |
| GPB18MR5150-B-HUD |
| GPB18MR5150-B-HUE |
| GPB18MR5150-B-HUEF |
| GPB18MR5150-B-HUF |
| GPB18MR5150-B-N[8,10] |
| GPB18MR5150-B-NK10 |
| GPB18MR5150-B-NUD |
| GPB18MR5150-B-NUE |
| GPB18MR5150-B-P6.35 |
| GPB18MR5150-B-P[6-11/1] |
| GPB18MR5150-B-PUC |
| GPB18MR5150-B-PUD |
| GPB18MR5150-B-PUE |
| GPB18MR5150-B-V6.35 |
| GPB18MR5150-B-V[6-13/1] |
| GPB18MR5250-A-C[10,12] |
| GPB18MR5250-A-H6.35 |
| GPB18MR5250-A-H[6-18/1] |
| GPB18MR5250-A-HUC |
| GPB18MR5250-A-HUD |
| GPB18MR5250-A-HUE |
| GPB18MR5250-A-HUEF |
| GPB18MR5250-A-HUF |
| GPB18MR5250-A-HUFG |
| GPB18MR5250-A-HUG |
| GPB18MR5250-A-N[8,10,11,12] |
| GPB18MR5250-A-NK10 |
| GPB18MR5250-A-NUD |
| GPB18MR5250-A-NUE |
| GPB18MR5250-A-P6.35 |
| GPB18MR5250-A-P[6-12/1] |
| GPB18MR5250-A-PUC |
Loading...
Basic Information
| Type | Timing Pulleys | Belt Type | MR5(for PowerGrip® GT®3) | Timing Pulleys/Idlers | Pulleys |
|---|
Specification/Dimensions
-
Belt Width Used(mm)(mm)
-
Number of Teeth(T)
-
Pulley Shape
- Shape A
- Shape B
-
Material
- Steel
- Aluminum
-
Shaft Bore Dia. d(inch)
-
Shaft Bore Spec.(inch)
- [HU] Inch Round Hole
- [NU] Inch Key Grove Hole+Tap
- [PU] Inch Round Hole+Tap
-
01.[H] Shaft Bore Spec. (Round Hole)(mm)
-
02.[P] Shaft Bore Spec. (Round Hole + Tap)(mm)
-
03.[N] Shaft Bore Spec. (New JIS Keyway Hole + Tap)(mm)
-
04.[NK] Shaft Bore Spec. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm)
-
05.[C] Shaft Bore Spec. (Old JIS Keyway Hole + Tap)
-
06.[V] Shaft Bore Spec. (Stepped Hole)(mm)
-
07.[F] Shaft Bore Spec. (Stepped Hole: Counterbored Holes on the Hub Side)(mm)
-
08.[Y] Shaft Bore Spec. (Both Ends Stepped Hole)(mm)
-
type
- GPA##MR5150
- GPA##MR5250
- GPB##MR5150
- GPB##MR5250
- GPK##MR5150
- GPK##MR5250
- GPM##MR5150
- GPM##MR5250
- GPP##MR5150
- GPP##MR5250
- GPT##MR5150
- GPT##MR5250
-
Surface Treatment
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Synchronous Pulleys - Regular Torque, MXL Series.
- Synchronous Pulleys - High Torque, S2M Series.
- Timing Pulleys - Regular Torque, T5 Series.
- Timing Pulleys - High Torque, with Fixing Hub, S3M Series.
- Idler Pulleys with Teeth - With Flange, Central Bearing, L and H Series.
- Idler Pulleys with Teeth - With Flange, Central Bearing, AT10 Series.
- Flange for Timing Pulley - Stainless steel, thickness 1.0 mm, series MXL, XL, L, S2M, S3M, S5M, T5, T10.
- Timing Pulleys - L Series.
Complementary Products
-
Timing Pulleys - High torque, high positioning accuracy, GT2 series.
MISUMI Days to Ship : 9 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy