(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
[NAAMS] L-Block Standard and Configurable 4x4 Holes (ALB511M)
![[NAAMS] L-Block Standard and Configurable 4x4 Holes ALB511M](http://mx.misumi-ec.com/en/linked/material/mech/MSM1/PHOTO/10303264740.jpg?$product_main$)
- Volume Discount
- inCAD Components
Part Number
Configured Part Number is shown.
ALB511M
![[NAAMS] L-Block Standard 4x4 Holes:Related Image](http://mx.misumi-ec.com/en/linked/item/10303264740/img/drw_01.gif)
| Type | [ M ]Material | Finish |
| ALB /ALBFB | A-36 Steel | Black Oxide |
| ALB/ SALBFB | 303/304 Stainless Steel | - |
[ T ]Tolerance
| Dimension | Tol. | Finish | Geometric | ||
| 0.0 | ±0.3 | 6.0μm | ![[NAAMS] L-Block Standard 4x4 Holes:Related Image](http://mx.misumi-ec.com/en/linked/item/10303264740/img/img_01.gif) | ![[NAAMS] L-Block Standard 4x4 Holes:Related Image](http://mx.misumi-ec.com/en/linked/item/10303264740/img/img_04.gif) Surfaces | 0.015 T.I.R |
| 0.00 | ±0.03 | 3.0μm | ![[NAAMS] L-Block Standard 4x4 Holes:Related Image](http://mx.misumi-ec.com/en/linked/item/10303264740/img/img_02.gif) | ||
| 0.000 | ±0.020 | 1.6μm | ![[NAAMS] L-Block Standard 4x4 Holes:Related Image](http://mx.misumi-ec.com/en/linked/item/10303264740/img/img_03.gif) | ||
Specifications
| Part Number | ||
| Type | Specification | |
| ALB | 080M | |
| ALB | 081 | |
| ALB | 512M | |
| Part Number | ||||||||||||||||
| Type | Width | Thickness | A Length | B Length | Hole (M) | Dowel(D) | Hole (MA/NA) | Dowel(DA) | ||||||||
| ALBFB | 15 | - | T10 | - | A90 | - | B65 | - | M8 | - | D8 | - | NA11 | - | DA6 | |
| SALBFB | 20 | - | T19 | - | A110 | - | B110 | - | M10 | - | D6 | - | MA10 | - | DA8 | |
Standard NAAMS (25mm Series L Blocks with Metric Holes)
| Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
| MA10 | NA11 | DA Dowel Hole (2) | M Tapped Hole (1) | D Dowel Hole (1) | |||||||||||
| A-36 | 304 | A-36 | 304 | Tolerance | Tolerance | ||||||||||
| ALB | 080M | 081M | 070M | 071M | 8 H6 | +0/+0.009 | M10 | 8 H6 | +0/+0.009 | 25 | 85 | 65 | 20 | 10 | 5 |
Standard NAAMS (25mm Series L Blocks with Inch Holes)
| Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
| MA3/8 | NA13/32 | DA Dowel Hole (2) | M Tapped Hole (1) | D Dowel Hole (1) | |||||||||||
| A-36 | 304 | A-36 | 304 | Tolerance | Tolerance | ||||||||||
| ALB | 080 | 081 | 070 | 071 | 5/16 | +0/-0.0005 | 3/8-16 | 5/16 | +0/-0.0005 | 25 | 85 | 65 | 20 | 10 | 5 |
Standard NAAMS (20mm Series L Blocks with Metric Holes)
| Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
| MA8 | NA9 | DA Dowel Hole (2) | M Tapped Hole (1) | D Dowel Hole (1) | |||||||||||
| A-36 | 304 | A-36 | 304 | Tolerance | Tolerance | ||||||||||
| ALB | 380M | 381M | 370M | 371M | 6 H6 | +0/+0.008 | M8 | 6 H6 | +0/+0.008 | 20 | 85 | 65 | 20 | 10 | 5 |
| 510M | 511M | 512M | 513M | 8 H6 | +0/+0.009 | M8 | 8 F7 | +0.013 /+0.028 | 20 | 85 | 65 | 20 | 10 | 5 | |
Configurable NAAMS (L Blocks)
| Type | W Width | T Thickness (1mm inc.) | A Length (1mm inc.) | B Length (1mm inc.) | Hole Selection (1) | Hole Selection (A)/(2) | A1 | B1 | ||||
| Hole Selection (1) | Dowel Hole (1) | Hole Selection (A) | Dowel Hole (2) | |||||||||
| Tolerance | Tolerance | |||||||||||
| ALBFB SALBFB | 20 25 | 14 ~ 20 (B1=5) 10 ~ 20 (B1≥20) | 80 - 120 | 65 - 120 B1=5 or B1≥20 | M8 M10 | D6 F7 D8 F7 | +0.010/+0.022 +0.013/+0.028 | NA9 NA11 MA8 MA10 | DA6 H6 DA8 H6 | +0/0.008 +0/0.009 | A-55-T | B-40-T B1=5 or B1≥20 |
N- through Hole, M- Tapped Hole (Coars Thread), D- Dowel Hole
N9/NA9 for M8 Screw, N11/NA11 for M10 Screw
MA8/M8 (M8x1.25 tapped Hole), MA10/M10 (M10x1.5 Tapped Hole)
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
Basic Information
| Standard or Configurable | Standard | Number of Holes | 4 Holes | Shape | Standard |
|---|---|---|---|---|---|
| Number of Holes | 4x4 |
Specification/Dimensions
-
type
- ALB070
- ALB071M
- ALB080M
- ALB081M
- ALB370M
- ALB371M
- ALB380M
- ALB381M
- ALB510M
- ALB511M
- ALB512M
- ALB513M
-
Material
- A-36 Steel
- 304 Stainless Steel
-
Inch/Metric Hole
- Inch
- Metric
-
(W)Width
- 20
- 25
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- [NAAMS] L-Block Standard and Configurable 3x3 Holes
- [NAAMS] L-Block Standard and Configurable 4x3 Holes
- [NAAMS] L-Block Wide Block 3 Holes
- [NAAMS] L-Block Wide Block 4 Holes Standard
- [NAAMS] L-Block Wide Block 4 Holes Opposite
- [NAAMS] L-Block T-Shape Standard and Configurable 3 Holes
- [NAAMS] L-Block T-Shape Standard and Configurable 4 Holes
- NAAMS Rough Locators - L-Shape, Inside, with Resin Guide
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy