(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Complete Flat Belt Conveyor - GV Series, center drive, pulley diameter 30mm.

Complete Flat Belt Conveyor - GV Series, center drive, pulley diameter 30mm.
  • New Products

The transmission has been designed as compact as possible. The most standard type with a structure that allows easy replacement of the band.

Part NumberBAvailable Sizes
L320~
400
L405~
500
L505~
600
L605~
700
L705~
800
L805~
900
L905~
1000
L1005~
1100
L1105~
1200
L1205~
1300
L1305~
1400
L1405~
1500
L1505~
1600
L1605~
1700
L1705~
1800
L1805~
1900
L1905~
2000
GVFN50
60~100
110~150
160~200
210~250
260~300

Each slot has 4 nuts inserted.
The dimensions in the diagram is for Belt Specification H (which has a belt thickness of 0.9mm). Note that the belt thickness varies
depending on belt specifications.
When L≥1,400, it is recommended to mount on at least 2 stands.
 FrameMotor CoverPulley Holder
MaterialAluminumAluminumAluminum
Surface TreatmentClear AnodizePaintedPainted

■Conveyor weight
*Reference values (vary depending on motor manufacturer) (kg)
Belt Width
B (mm)
Distance between Pulleys L (mm)
500100015002000
1007.89.310.912.4
20010.212.314.316.3
30012.715.217.720.2
*When the motor output is 40 W, add 2.7 kg.
*When the motor output is 60 W, add 3.6 kg.
*When the motor output is 90 W, add 3.9 kg.

Specifications

Part Number-B-L-Output-Belt
Specifications
-Motor Manufacturer
Selection
(-Alterations)  
 
Output-Voltage-Specifications-Gearhead
Reduction Ratio
GVFN-230-1500-25-TA220-IM-36-D-A(-MP · FYA · FYB · SCB · NA · WA)
Part NumberB
10 mm Increments
L
5 mm Increments
MotorBelt SpecificationsMotor Manufacturer Selection
The prices vary by manufacturer.
Output (W)Voltage (V)SpecificationsGearhead Reduction Ratio
GVFN50~300320~200025
40
60
90
TA110
TA220
TA115
TA230
IM
(Constant Speed Motor)
SCM
(Variable Speed Motor)
5
18
60
120
7.5
25
75
150
9
30
90
180
12.5
36
100
15
50

 
H (General Purpose, Green)
W (General Purpose, White)
G (For Sliding, Green)
S (For Sliding, White)
D (For Electronic Parts Transfer, Black)
F (For Food Transfer, White)
O (Oil Resistant, Navy Blue)
N (Non-adhesive, White)
J (No Belt)
A (Panasonic Motor)
B (Oriental Motor)
C (Taiwanese Motor)
*SCM (Variable Speed Motor) is not selectable for A.
*For C, the conveyance speed may decrease by approx. 20%.
(Single-phase)
SA220
SA230

(3-Phase)
IM
(Constant Speed Motor)
NV
(No Motor)
NM (No Motor)NH (No Gearhead)R (No Motor, Gearhead)
Connect the motor so that the belt rotates in the direction of conveyance.
When "No motor, gearhead" is selected, the motor mounting hole pitch will vary depending on the motor output. For the dimension details, see Technical Information in our Conveyor Selection web site.
When "No motor, gearhead" is selected, this unit will be delivered unassembled. The customer is to assemble the unit by following instructions on the included assembly procedure manual. See our Conveyor Selection site for packaging details.
Mounting brackets for speed controllers are not included with the variable speed motor. When mounting brackets for speed controllers are required, select [SCB] as an alteration.
Oil-resistant belts cannot be used in environments where oil adheres to the back face.
Regardless of belt specifications, it is not recommended to use the belt while the conveyor is tilted.
Part Number
GVFN-[50-300/10]-[320-2000/5]-[25,​40,​60,​90]-NV-[IM,​INV,​NM,​SCM]-[5,​7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-[D,​F,​G,​H,​J,​N,​O,​S,​W]-[A,​B,​C,​R]
GVFN-[50-300/10]-[320-2000/5]-[25,​40,​60,​90]-SA[200,​220,​230]-[IM,​INV,​NM,​SCM]-[5,​7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-[D,​F,​G,​H,​J,​N,​O,​S,​W]-[A,​B,​C,​R]
GVFN-[50-300/10]-[320-2000/5]-[25,​40,​60,​90]-TA[100,​110,​115,​200,​220,​230]-[IM,​INV,​NM,​SCM]-[5,​7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-[D,​F,​G,​H,​J,​N,​O,​S,​W]-[A,​B,​C,​R]
Part NumberMinimum order quantityVolume DiscountDays to Ship Belt Width W
(mm)
Conveyer Length L
(mm)
3. Motor Output
(W)
4. Motor Voltage (Single-Phase) TA
(V)
4. Motor Voltage (3-Phase) SA
(V)
4. Motor Voltage (No Motor) 5. Motor Type 6. Gearhead Reduction Ratio 7. Belt Specifications 8. Motor Manufacturer Selection
1 Piece(s)

15 Days or more

50 ~ 300320 ~ 200025 ~ 90--No Motor [NV]No Motor [NM] / [IM] Constant Speed Motor / [INV] Constant Speed Motor + Inverter / [SCM] Variable Speed Motor5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH]Food Grade - White [F] / General Use - Green [H] / General Use - White [W] / No Belt [J] / Non-Stick Food Grade - White [N] / Oil Resistant - Navy Blue [O] / Sliding - Green [G] / Sliding - White [S] / Static Conductive - Black [D][A] Panasonic / [B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor Gear Head
1 Piece(s)

15 Days or more

50 ~ 300320 ~ 200025 ~ 90-200 ~ 230-No Motor [NM] / [IM] Constant Speed Motor / [INV] Constant Speed Motor + Inverter / [SCM] Variable Speed Motor5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH]Food Grade - White [F] / General Use - Green [H] / General Use - White [W] / No Belt [J] / Non-Stick Food Grade - White [N] / Oil Resistant - Navy Blue [O] / Sliding - Green [G] / Sliding - White [S] / Static Conductive - Black [D][A] Panasonic / [B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor Gear Head
1 Piece(s)

15 Days or more

50 ~ 300320 ~ 200025 ~ 90100 ~ 230--No Motor [NM] / [IM] Constant Speed Motor / [INV] Constant Speed Motor + Inverter / [SCM] Variable Speed Motor5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH]Food Grade - White [F] / General Use - Green [H] / General Use - White [W] / No Belt [J] / Non-Stick Food Grade - White [N] / Oil Resistant - Navy Blue [O] / Sliding - Green [G] / Sliding - White [S] / Static Conductive - Black [D][A] Panasonic / [B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor Gear Head

Loading...

  1. 1
 

Basic Information

Tail Roller Dia. D (Tail Transfer Part R)(mm) 30 Drive Roller Dia.(mm) 30

Frequently asked questions (FAQ)

質問: Where can I find spare parts for my MISUMI conveyor?
回答: You can easily search for spare parts at: https://us.misumi-ec.com/conveyor/maintenance_search.html
質問: What flat belts are available for conveyors?
回答: Flat belt specifications for conveyors can be found at: https://us.misumi-ec.com/pdf/fa/2014/p1_1279.pdf

Additional Products in this Category

Complementary Products

Tech Support