(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Aluminum Extrusion - 6 series, Base 30 (Part Numbers)

Aluminum Extrusion - 6 series, Base 30
  • Volume Discount
  • Spec Expansion
  • Price Reduction

Due to increased freight costs, some of the products below may have increased pricing for lengths of 2500mm+.

HFS6 Series 30mm x 30mm

  • inCAD Components

(i)Caution

  • Due to high demand and current manufacturing limitations, lead time for some aluminum extrusion may longer. We apologize for the inconvenience. If you need the help for lead time, please contact us.

Specifications

Part Number - L
HFS6-3030
KHFS6-3030
KHFS6-3030
-
-
-
800
1000
4000
■Configurable Length Extrusions
Type [ M ]Material [ S ]Surface Treatment Part Number L 0.5mm Increment Mass kg/m Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Aluminum Alloy Clear Anodize HFS6-3030 50~4000 0.9 333 2.83x104 2.83x104
HFS A6N01SS-T5 Aluminum Alloy Black Anodize HFSB6-3030 50~4000 0.9 333 2.83x104 2.83x104
HFS A6N01SS-T5 Aluminum Alloy Clear Coating CAF6-3030 50~4000 0.9 333 2.83x104 2.83x104
HFS A6N01SS-T5 Aluminum Alloy Baked - on Fish Yellow HFSY6-3030 50~4000 0.9 333 2.83x104 2.83x104
HFSL A6N01SS-T5 Aluminum Alloy Clear Anodize HFSL6-3030 50~4000 0.76 280 2.68x104 2.68x104
HFSL A6N01SS-T5 Aluminum Alloy Black Anodize HFSLB6-3030 50~4000 0.76 280 2.68x104 2.68x104
GFS 6061-T6 Aluminum Alloy Equivalent Clear Anodize GFS6-3030 50~4000 1.02 377 3.47x104 3.47x104
[ ! ]Applicable to 6000mm depending on products.
[ ! ]For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.

■Fixed Length Extrusions (Effective Length 4000mm, 1000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Type Material Surface Treatment Part Number L
mm
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Aluminum Alloy Clear Anodize KHFS6-3030 4000 333 2.83x104 2.83x104
HFS A6N01SS-T5 Aluminum Alloy Clear Anodize KHFS6-3030 1000 333 2.83x104 2.83x104
HFS A6N01SS-T5 Aluminum Alloy Black Anodize KHFSB6-3030 4000 333 2.83x104 2.83x104
HFS A6N01SS-T5 Aluminum Alloy Clear Coating KCAF6-3030 4000 333 2.83x104 2.83x104
HFS A6N01SS-T5 Aluminum Alloy Baked Paint (Yellow) KHFSY6-3030 4000 333 2.83x104 2.83x104
HFSL A6N01SS-T5 Aluminum Alloy Clear Anodize KHFSL6-3030 4000 280 2.68x104 2.68x104
HFSL A6N01SS-T5 Aluminum Alloy Black Anodize KHFSLB6-3030 4000 280 2.68x104 2.68x104
GFS 6061-T6 Aluminum Alloy Equivalent Clear Anodize KGFS6-3030 4000 377 3.47x104 3.47x104
[ ! ]"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length.
(several cm)

Alterations

Aluminum Extrusion - 6 series, Base 30:Related Image

Alterations are not applicable to all frames. 

CategoryAlteration NamesCodesExplanationsCatalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling ServiceP2-679&680
End TappingEnd Tapping on Center HoleLTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends.P2-681
End Tapping 4 Corner HolesLSP/RSP/SPWP2-692
Specify How to CutPrecision CutSC

Change total length tolerance. (L±0.5→L±0.2)

Available only for L≦1500

P2-682
45 deg CutL_T45/R_T45Cut at 45 deg angle. 
Wrench Access HolesWrench Access Hole at Fixed PositionLWP/RWPAdd wrench access holes at fixed position for blind joints. P2-683&684
Wrench Access Hole at Specified PositionAH/BH/AV/BVAdd wrench access holes at specified position for blind joints.P2-685&686
CounterboresCounterbores at Specified PositionZ6/XA100

Add counterbores at specified position. Use the holes for connecting the frames and a table top. 

P2-687
Holes for Specific Blind Joint TypeD HoleLDH/RDHAdd holes needed for Single Joint connection.P2-688
S HoleLSH/RSHAdd holes needed for pre-assembly double joint connection.P2-689
M HoleLMH/RMHAdd holes needed for post-assembly double joint connection.P2-690
L HoleJLP/KLPAdd holes needed for parallel joint connection. P2-691
Other AlterationsGNFS/GFS Series End TappingLTS/RTS/TSWAdd end tappings on high rigidity frames. P2-692
HFSR Series End TappingLTS/RTS/TSWAdd end tappings needed for adding a protection cover on the end fo HFSR series frame. 
  

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CAF6-3030-[50-1800/0.5]
CAF6-3030-[1801-2000/0.5]
GFS6-3030-[50-4000/0.5]
HFS6-3030-[50-1800/0.5]
HFS6-3030-[1801-4000/0.5]
HFSB6-3030-[50-1800/0.5]
HFSB6-3030-[1801-4000/0.5]
HFSLB6-3030-[50-4000/0.5]
HFSY6-3030-[50-1800/0.5]
HFSY6-3030-[1801-2000/0.5]
KHFS6-3030-1000
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSExtrusion Type Surface Finish Material L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)
1 Piece(s)

8 Days or more

10HFSClear CoatingA6N01SS-T5 Aluminum AlloyConfigurable-50 ~ 1800
1 Piece(s)

8 Days or more

10HFSClear CoatingA6N01SS-T5 Aluminum AlloyConfigurable-1801 ~ 2000
1 Piece(s)

4 Days

10GFSClear Anodize6061 Aluminum AlloySS-T6 EquivalentConfigurable-50 ~ 4000
1 Piece(s)

10 Days

10HFSClear AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-50 ~ 1800
1 Piece(s)

10 Days

10HFSClear AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-1801 ~ 4000
1 Piece(s)

5 Days

10HFSBlack AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-50 ~ 1800
1 Piece(s)

5 Days

10HFSBlack AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-1801 ~ 4000
1 Piece(s)

4 Days

10HFSLBlack AnodizeA6N01SS-T5 Aluminum AlloyConfigurable-50 ~ 4000
1 Piece(s)

8 Days or more

10HFSBaked-on Finish (Yellow)A6N01SS-T5 Aluminum AlloyConfigurable-50 ~ 1800
1 Piece(s)

8 Days or more

10HFSBaked-on Finish (Yellow)A6N01SS-T5 Aluminum AlloyConfigurable-1801 ~ 2000
1 Piece(s)Available

5 Days

10HFSClear AnodizeA6N01SS-T5 Aluminum AlloyStandard, Fixed1000-

Loading...

  1. 1
 

Basic Information

Standard Extrusion Size(mm) 30 Extrusion Size 30x30 Extrusion Series 6 Series
Extrusion Type Square Number of Extrusion Slots 1 Slot-1 Slot Number of Grooved Surfaces Four Side Slots
Surface Milled None Extrusion Size - Width (A)(mm)(mm) 30 Extrusion Size - Thickness (T)(mm)(mm) 30

Frequently asked questions (FAQ)

質問: What is the load capacity of this extrusion?
回答: The formulas to determine load capacity of extrusions can be found at: https://us.misumi-ec.com/pdf/fa/2010/p2431.pdf

Additional Products in this Category

Complementary Products

Tech Support