(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Bushings for Locating Pins - Straight. (JBA16-25)

Bushings for Locating Pins - Straight. JBA16-25
  • On Sale Till 15/12/2024
  • Volume Discount
  • Spec Change

•Shape: Straight
•Bore (Inner Dia.) Shape: Round
•Outer Dia. Tolerance: Oversized

  • inCAD Components
Bushings for Locating Pins - Straight, Standard:Related Image
・Materials
■Standard
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
p6m6
O1 Tool Steel Equivalent-60HRC~JBAJBAM
O1 Tool Steel EquivalentElectroless Nickel Plating60HRC~JBANJBAMN
440C or 420 Stainless Steel-50HRC~JBACJBAMC
[ ! ]Tolerance of d dimension 2 ~ 6 of electroless nickel plated products is H7.
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)

■Thin Wall
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
p6m6
52100 Bearing Steel or O1 Tool Steel Equivalent-58HRC~JBAUPJBAU
52100 Bearing Steel or O1 Tool Steel EquivalentElectroless Nickel Plating58HRC~JBAUNPJBAUN
440C or 420 Stainless Steel-50HRC~JBAUCPJBAUC
[ ! ]Tolerance of d dimension 3 ~ 6 of electroless nickel plated products is H7.
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)
 

Specifications

Part Number-L
JBAC12
JBAUN8
-
-
10
8
■Standard
Part NumberL
Selection
Thickness (N)RDD Tolerance
Typedd Tolerancep6m6
No Surface TreatmentElectroless Nickel Plating
(p6)
JBA
JBAN
J
BAC

(m6)
JBAM
JBAMN

JBAMC
2G6+0.008
+0.002
H7+0.010
0
56781012      1.50.85+0.020
+0.012
+0.012
+0.004
3G6+0.008
+0.002
H7+0.010
0
20.87+0.024
+0.015
+0.015
+0.006
4G6+0.012
+0.004
H7+0.012
0
5678101215*1620   218+0.024
+0.015
+0.015
+0.006
5G6+0.012
+0.004
H7+0.012
0
56781012151620   2.5110+0.024
+0.015
+0.015
+0.006
6G6+0.012
+0.004
H7+0.012
0
5678101215162025  2110+0.024
+0.015
+0.015
+0.006
8G6+0.014
+0.005
G6+0.014
+0.005
2212+0.029
+0.018
+0.018
+0.007
10G6+0.014
+0.005
G6+0.014
+0.005
 67810121516202530 2.5215+0.029
+0.018
+0.018
+0.007
12G6+0.017
+0.006
G6+0.017
+0.006
   810121516202530 3218+0.029
+0.018
+0.018
+0.007
13G6+0.017
+0.006
G6+0.017
+0.006
    1012*151620*2530 4.5222+0.035
+0.022
+0.021
+0.008
15G6+0.017
+0.006
G6+0.017
+0.006
     12151620*2530 5225+0.035
+0.022
+0.021
+0.008
16G6+0.017
+0.006
G6+0.017
+0.006
     121516202530 5226+0.035
+0.022
+0.021
+0.008
20G6+0.020
+0.007
G6+0.020
+0.007
 5330+0.035
+0.022
+0.021
+0.008
25G6+0.020
+0.007
G6+0.020
+0.007
       16202530*355335+0.042
+0.026
+0.025
+0.009
[ NG ]L dimension with * is not applicable to JBAMC.
■Thin Wall
Part NumberL SelectionThickness (N)RDD Tolerance
Typedd Tolerancep6m6
No Surface TreatmentElectroless Nickel Plating
(p6)
JBAUP
JBAUNP
JBAUCP


(m6)
JBAU
JBAUN
JBAUC
3G6+0.008
+0.002
H7+0.010
0
5681012    10.55+0.020
+0.012
+0.012
+0.004
4G6+0.012
+0.004
H7+0.012
0
56810121516  10.56+0.020
+0.012
+0.012
+0.004
5G6+0.012
+0.004
H7+0.012
0
5681012151620 10.57+0.024
+0.015
+0.015
+0.006
6G6+0.012
+0.004
H7+0.012
0
10.58+0.024
+0.015
+0.015
+0.006
8G6+0.014
+0.005
G6+0.014
+0.005
 681012151620 10.510+0.024
+0.015
+0.015
+0.006
10G6+0.014
+0.005
G6+0.014
+0.005
1.50.513+0.029
+0.018
+0.018
+0.007
12G6+0.017
+0.006
G6+0.017
+0.006
  81012151620 1.50.515+0.029
+0.018
+0.018
+0.007
13G6+0.017
+0.006
G6+0.017
+0.006
   1012*151620 2117+0.029
+0.018
+0.018
+0.007
15G6+0.017
+0.006
G6+0.017
+0.006
   1012151620 2119+0.035
+0.022
+0.021
+0.008
16G6+0.017
+0.006
G6+0.017
+0.006
   1012151620252.5221+0.035
+0.022
+0.021
+0.008
20G6+0.020
+0.007
G6+0.020
+0.007
    12151620253226+0.035
+0.022
+0.021
+0.008
25G6+0.020
+0.007
G6+0.020
+0.007
       20253231+0.042
+0.026
+0.025
+0.009
[ NG ]L dimension with * is not applicable to JBAUN.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
JBA16-25
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSInner Dia. (mm)
(mm)
Outer Dia. (mm)
(mm)
Material Surface Finish I.D. d
(mm)
D Tolerance Length L
(mm)
1 Piece(s)Available

6 Days or more

101626[Steel] O1 Tool SteelNo16p625

Loading...

  1. 1

Example

Bushings for Locating Pins - Straight, Standard:Related Image
 

Basic Information

Basic Shape Straight Bore (Inner Dia.) Shape Round shape Outer Dia. Tolerance Oversized
Special Features No

Please check the type/dimensions/specifications of the part JBA16-25 in the Bushings for Locating Pins - Straight. series.

Products like this...

Part Number
JBA10-16
JBA10-20
JBA10-25
JBA16-30
JBA2-10
JBA2-12
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSInner Dia. (mm)
(mm)
Outer Dia. (mm)
(mm)
Material Surface Finish I.D. d
(mm)
D Tolerance Length L
(mm)
1 Piece(s)Available

Same day

Stock

101015[Steel] O1 Tool SteelNo10p616
1 Piece(s)Available

Same day

Stock

101015[Steel] O1 Tool SteelNo10p620
1 Piece(s)Available

6 Days or more

101015[Steel] O1 Tool SteelNo10p625
1 Piece(s)Available

6 Days or more

101626[Steel] O1 Tool SteelNo16p630
1 Piece(s)Available

6 Days or more

1025[Steel] O1 Tool SteelNo2p610
1 Piece(s)Available

6 Days or more

1025[Steel] O1 Tool SteelNo2p612

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.