(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Large Head Locating Pins - Round head, flat tip, internally threaded shank (Hardened Stainless Steel). (Part Numbers)

Large Head Locating Pins - Round head, flat tip, internally threaded shank (Hardened Stainless Steel).
  • Spec Change

The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.

PDF

Locating Pins - Hardened Stainless Steel Large Head - Flat End:
・Materials
[ M ]Material[ H ]HardnessTapped
g6
High Hardness
Stainless Steel
35HRC~AFPDTC

Specifications

Part NumberD-P-L-B
AFPDTC8-P9.25-L15-B8.6
■Tapped
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
M
(Coarse)
* Recommended Tightening Torque
N • cm
2C
TypeDD dim. Tolerance g6
AFPDTC6-0.004
-0.012
6.50~10.006~162.0~15.0M314751
8-0.005
-0.014
8.50~10.008~16M433361.5
[ ! ]Note the strength of under-head part. >>P.1566 [ ! ]Please confirm pilot hole depth on >> P.1566. Holes may go through.
* Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >> P. 2297 (10.9). Not applicable when using locking materials or lock washers.

Alterations

Locating Pins - Hardened Stainless Steel Large Head - Flat End:

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
AFPDTC6-P[6.5-16/0.01]-L[6-16/1]-B[2-30/0.1]
AFPDTC8-P[8.5-16/0.01]-L[8-16/1]-B[2-30/0.1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSMounted Side Outer Diameter D
(mm)
Thread Diameter M
(mm)
B
(mm)
L
(mm)
1 Piece(s)

10 Days or more

10632 ~ 306 ~ 16
1 Piece(s)

10 Days or more

10842 ~ 308 ~ 16

Loading...

  1. 1

Lead Time

Basic Information

Basic Shape Large Head Head Shape Round Head Tip Shape Flat
Drive No Shank Style Female Thread Material Hardened Stainless Steel
Heat Treatment No Surface Finish No Tolerance of Positioning Side Outer Diameter 0/-0.01
Shank Dia. Tolerance g6 Dimension Configurable Type P, L, B Dimensions Configurable

Additional Products in this Category

Tech Support