(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Shaft Collars - Two flat cuts. (Part Numbers)
- Volume Discount
- Spec Change
Space Saving -Flat Separate Sides Easy Sensor Bracket Mounting
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ S ]Surface Treatment | [ A ]Accessories | ||
| Standard | Cut Surface Mounting Holes | Side Mounting Holes | |||
| SCSNK | SCKNK | SCJNK | 1045 Carbon Steel | Black Oxide Coating | Hex Socket Head Cap Screw 1 pc. |
| PSCSNK | PSCKNK | PSCJNK | Electroless Nickel Plating | Hex Socket Head Cap Screw 1 pc. (Stainless Steel) | |
| SSCSNK | SSCKNK | SSCJNK | 304 Stainless Steel | - | |
Specifications
| Part Number | - | B |
| SCKNK15 | - | 10 |
| Part Number | B Selection | D1 | H | M (Coarse) | d | R | W | X | Y | Z | h | M1 (Coarse) | Y1 | P | JPY Compliance with Standard | |||||||
| SCSNK | PSCSNK | SSCSNK | SCKNK SCJNK | PSCKNK PSCJNK | SSCKNK SSCJNK | |||||||||||||||||
| Type | D | |||||||||||||||||||||
| Standard SCSNK PSCSNK SSCSNK (D Dimension 6 ~ 40) Cut Surface Mount Hole SCKNK PSCKNK SSCKNK (D Dimension 10 ~ 40) Side Mount Hole Type SCJNK PSCJNK SSCJNK (D Dimension 10 ~ 40) Cut Surface Mount Hole Type, Side Mount Hole Type and Cut Surface Mount Hole Split Type are available for * marked B dimension only. For Side Mount Hole Type, | 6 | 8 | 20 | 17 | M3 | 3.4 | 3 | 1 | 6 | 4 | 6~6.5 | - | - | - | - | ● | ● | ● | - | - | - | |
| 10 | 20 | 17 | M4 | 4.5 | 3.75 | 1 | 6 | 4 | 6~6.5 | - | - | - | - | ● | ● | - | - | - | - | |||
| 8 | 8 | 25 | 19 | M3 | 3.4 | 3 | 1.5 | 8 | 5 | 7~9 | - | - | - | - | ● | ● | ● | - | - | - | ||
| 10 | 25 | 19 | M4 | 4.5 | 3.75 | 1.5 | 8 | 5 | 7~9 | - | - | - | - | ● | ● | ● | - | - | - | |||
| 10 | 8 | 30 | 22 | M3 | 3.4 | 3 | 1.5 | 9 | 5 | 8~10 | - | - | - | - | ● | ● | ● | - | - | - | ||
| *10 | 30 | 22 | M4 | 4.5 | 3.75 | 1.5 | 9 | 5 | 8~10 | 6.4 | M4 | 10 | [ ! ] | 10 | ● | ● | ● | ● | ● | ● | ||
| 12 | *10 | 30 | 22 | M4 | 4.5 | 3.75 | 1.5 | 10 | 5 | 9~10 | 5.8 | M4 | 10 | 10 | ● | ● | ● | ● | ● | ● | ||
| 12 | 30 | 22 | M5 | 5.5 | 4.5 | 1.5 | 10 | 5 | 9~10 | - | - | - | - | ● | ● | ● | - | - | - | |||
| 15 | *10 | 34 | 24 | M4 | 4.5 | 3.75 | 1.5 | 11.5 | 6 | 10~11 | 5.6 | M4 | 12 | 12 | ● | ● | ● | ● | ● | ● | ||
| 12 | 35 | 24 | M5 | 5.5 | 4.5 | 1.5 | 12 | 6 | 11~13 | - | - | - | - | ● | ● | ● | - | - | - | |||
| 16 | *10 | 35 | 24 | M5 | 5.5 | 4.5 | 1.5 | 12 | 6 | 11~12 | 4.8 | M5 | 12 | 12 | ● | ● | ● | ● | ● | ● | ||
| 12 | 35 | 24 | M5 | 5.5 | 4.5 | 1.5 | 12 | 6 | 11~12 | - | - | - | - | ● | ● | ● | - | - | - | |||
| 20 | *10 | 40 | 30 | M5 | 5.5 | 4.5 | 1.5 | 14 | 7 | 13 | 6 | M5 | 14 | 14 | ● | ● | ● | ● | ● | ● | ||
| 12 | 40 | 30 | M5 | 5.5 | 4.5 | 1.5 | 14 | 7 | 13 | - | - | - | - | ● | ● | ● | - | - | - | |||
| 15 | 45 | 30 | M6 | 6.6 | 6 | 1.5 | 15 | 8 | 13~15 | - | - | - | - | ● | ● | ● | - | - | - | |||
| 25 | 12 | 45 | 36 | M5 | 5.5 | 4.5 | 1.5 | 17 | 7 | 16 | - | - | - | - | ● | ● | ● | - | - | - | ||
| *15 | 50 | 36 | M6 | 6.6 | 6 | 1.5 | 18 | 10 | 16~18 | 6.7 | M5 | 16 | 16 | ● | ● | ● | ● | ● | ● | |||
| 30 | *15 | 55 | 41 | M6 | 6.6 | 6 | 1.5 | 20 | 10 | 18~20 | 7.2 | M6 | 20 | 20 | ● | ● | ● | ● | ● | ● | ||
| 35 | 15 | 60 | 46 | M6 | 6.6 | 6 | 2 | 23 | 12 | 21 | - | - | - | - | ● | ● | ● | - | - | - | ||
| 40 | *18 | 70 | 53 | M8 | 9 | 7 | 2 | 26 | 13 | 23 | 9 | M8 | 26 | 26 | ● | ● | ● | ● | ● | ● | ||
[ ! ]The halves must remain in the same orientation as shipped when in use.
[ ! ]M1 effective thread depth is 7mm (pilot hole through) for D10 ~ 16, 9mm (pilot hole through) for D20 of Cut Surface Mount Hole Type. For others, thread hole is through.
Price list
| Part Number | B Selection | Available Sizes | ||||||
| SCSNK | PSCSNK | SSCSNK | SCKNK SCJNK | PSCKNK PSCJNK | SSCKNK SSCJNK | |||
| Type | D | |||||||
| Standard SCSNK PSCSNK SSCSNK (D Dimension 6 ~ 40) Cut Surface Mount Hole SCKNK PSCKNK SSCKNK (D Dimension 10 ~ 40) Side Mount Hole Type SCJNK PSCJNK SSCJNK (D Dimension 10 ~ 40) Cut Surface Mount Hole Type, Side Mount Hole Type and Cut Surface Mount Hole Split Type are available for * marked B dimension only. For Side Mount Hole Type, | 6 | 8 | - | - | - | |||
| 10 | - | - | - | - | ||||
| 8 | 8 | - | - | - | ||||
| 10 | - | - | - | |||||
| 10 | 8 | - | - | - | ||||
| *10 | ||||||||
| 12 | *10 | |||||||
| 12 | - | - | - | |||||
| 15 | *10 | |||||||
| 12 | - | - | - | |||||
| 16 | *10 | |||||||
| 12 | - | - | - | |||||
| 20 | *10 | |||||||
| 12 | - | - | - | |||||
| 15 | - | - | - | |||||
| 25 | 12 | - | - | - | ||||
| *15 | ||||||||
| 30 | *15 | |||||||
| 35 | 15 | - | - | - | ||||
| 40 | *18 | |||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SSCSNK8-10 |
| SSCSNK10-8 |
| SSCSNK10-10 |
| SSCSNK12-10 |
| SSCSNK12-12 |
| SSCSNK15-10 |
| SSCSNK15-12 |
| SSCSNK16-10 |
| SSCSNK16-12 |
| SSCSNK20-10 |
| SSCSNK20-12 |
| SSCSNK20-15 |
| SSCSNK25-12 |
| SSCSNK25-15 |
| SSCSNK30-15 |
| SSCSNK35-15 |
| SSCSNK40-18 |
Loading...
Example
Basic Information
| Tightening Method | One Piece Clamp-On | Width | Standard Type |
|---|
Stock
-
- Stock Item Only
Specification/Dimensions
-
Features
-
With Side Holes -
Two Flats
-
-
For Shaft Size(mm/inch)
-
O.D. (Outside Diameter)(mm/inch)
-
Width(mm/inch)
-
Material
- 1045 Carbon Steel
- Stainless Steel
-
Surface Finish
- None
- Electroless Nickel
- Black Oxide
-
Side Hole Machining
- None
- 2 Tapped Holes
-
Shape Type
-
type
- PSCJNK
- PSCKNK
- PSCSNK
- SCJNK
- SCKNK
- SCSNK
- SSCJNK
- SSCKNK
- SSCSNK
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Shaft Collars - Counterbored holes.
- Shaft Collars - 2 threaded holes.
- Shaft Collars - Clamp type, 2 lateral mounting holes (inches).
- Shaft Collars - With damper, clamp type (inch).
- Shaft Collars - Slit, threaded inserts (aluminum).
- Shaft Collars - Adjusting lever, standard.
- Shaft Collars - Split, 2 side holes.
- Shaft Collars - With sensor adapter.
Complementary Products
-
Shaft Supports - T-shape, slim body, with top groove. Shaft adjustment with screw.
MISUMI Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy