(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Aluminum with no surface treatment and celar anodize are added as new. [3/31/23]
Utilizing of Mounting Hole on Cut Side facilitates Sensor Bracket Assembly.. Aluminum Material recommended for Weight Saving..
Part Number
Configured Part Number is shown.
PSDS20
Type | [ M ]Material | [ S ]Surface Treatment | [ A ]Accessories |
SDS | 1045 Carbon Steel | Black Oxide Coating | Hex Socket Head Cap Screw 2 pcs. |
PSDS | Electroless Nickel Plating | Hex Socket Head Cap Screw 2 pcs. (Stainless Steel) | |
SSCDS | 304 Stainless Steel | - | |
SDSA | 2017 Aluminum Alloy | - |
Type | [ M ]Material | [ S ]Surface Treatment | [ A ]Accessories |
SDSJ | 1045 Carbon Steel | Black Oxide Coating | Hex Socket Head Cap Screw 2 pcs. |
PSDSJ | Electroless Nickel Plating | Hex Socket Head Cap Screw 2 pcs. (Stainless Steel) | |
SSCDSJ | 304 Stainless Steel | - |
Part Number | - | B |
SDS10 SDSJ16 | - | 8 |
D | B | D1 | M (Coarse) | d | R | H | M1 | P | h | W | X | Y | Z | 1045 Carbon Steel | 304 Stainless Steel | 2017 Aluminum Alloy | ||||||||||||||||
Black Oxide Coating | Electroless Nickel Plating | - | - | |||||||||||||||||||||||||||||
Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | Standard Type | Compact Type | SDS (Standard) | SDSJ (Compact) | PSDS (Standard) | PSDSJ (Compact) | SSCDS (Standard) | SSCDSJ (Compact) | SDSA (Standard) | ||
8- | 15 | 30 | - | M5 | - | 5.5 | - | 4.5 | - | 13 | - | M3 | - | 8 | - | 7 | - | 1.5 | - | 10 | - | 6 | - | 8 | - | ● | - | ● | - | ● | - | ● |
10- | 8 | - | 30 | - | M3 | - | 3.4 | - | 3 | - | 12 | - | M3 | - | 8 | - | 5 | - | 1.5 | - | 9 | - | 5 | - | 8~10 | - | ● | - | ● | - | ● | - |
15 | 35 | - | M5 | - | 5.5 | - | 4.5 | - | 15 | - | M4 | - | 10 | - | 7 | - | 1.5 | - | 11.5 | - | 6 | - | 10 | - | ● | - | ● | - | ● | - | ● | |
12- | 8 | - | 30 | - | M3 | - | 3.4 | - | 3 | - | 12 | - | M3 | - | 8 | - | 5 | - | 1.5 | - | 10 | - | 5 | - | 9~10 | - | ● | - | ● | - | ● | - |
15 | 35 | - | M5 | - | 5.5 | - | 4.5 | - | 15 | - | M4 | - | 10 | - | 7 | - | 1.5 | - | 11.5 | - | 6 | - | 10 | - | ● | - | ● | - | ● | - | ● | |
13- | 15 | 35 | - | M5 | - | 5.5 | - | 4.5 | - | 15 | - | M4 | - | 10 | - | 7 | - | 1.5 | - | 11.5 | - | 6 | - | 10 | - | ● | - | ● | - | ● | - | - |
15- | 8 | - | 30 | - | M3 | - | 3.4 | - | 3 | - | 12 | - | M3 | - | 10 | - | 5 | - | 1.5 | - | 11 | - | 3 | - | 11 | - | ● | - | ● | - | ● | - |
15 | 40 | - | M6 | - | 7 | - | 6 | - | 17 | - | M5 | - | 12 | - | 7 | - | 1.5 | - | 13 | - | 8 | - | 12 | - | ● | - | ● | - | ● | - | ● | |
16- | 8 | - | 30 | - | M3 | - | 3.4 | - | 3 | - | 12 | - | M3 | - | 10 | - | 4.8 | - | 1.5 | - | 11.5 | - | 3 | - | 11 | - | ● | - | ● | - | ● | - |
15 | 40 | - | M6 | - | 7 | - | 6 | - | 17 | - | M5 | - | 12 | - | 7 | - | 1.5 | - | 13 | - | 8 | - | 12 | - | ● | - | ● | - | ● | - | ● | |
18- | 15 | 45 | - | M6 | - | 7 | - | 6 | - | 18.5 | - | M5 | - | 15 | - | 9 | - | 1.5 | - | 15 | - | 8 | - | - | - | ● | - | ● | - | - | - | - |
20- | 8 | - | 35 | - | M3 | - | 3.4 | - | 3 | - | 15 | - | M3 | - | 10 | - | 5 | - | 1.5 | - | 13 | - | 5 | - | 13 | - | ● | - | ● | - | ● | - |
15 | 45 | - | M6 | - | 7 | - | 6 | - | 18.5 | - | M5 | - | 15 | - | 9 | - | 1.5 | - | 15 | - | 8 | - | 13 | - | ● | - | ● | - | ● | - | ● | |
25- | 10 | - | 42 | - | M4 | - | 4.5 | - | 3.75 | - | 18.5 | - | M4 | - | 12 | - | 6 | - | 1.5 | - | 16.5 | - | 5 | - | 16.5 | - | ● | - | ● | - | ● | - |
15 | 50 | - | M6 | - | 7 | - | 6 | - | 21 | - | M5 | - | 20 | - | 10 | - | 1.5 | - | 18 | - | 10 | - | 16 | - | ● | - | ● | - | ● | - | ● | |
30- | 12 | - | 50 | - | M5 | - | 5.5 | - | 4.5 | - | 22 | - | M4 | - | 12 | - | 6 | - | 1.5 | - | 20 | - | 6 | - | 20 | - | ● | - | ● | - | ● | - |
15 | 55 | - | M6 | - | 7 | - | 6 | - | 23.5 | - | M6 | - | 21 | - | 10 | - | 1.5 | - | 20 | - | 10 | - | 18 | - | ● | - | ● | - | ● | - | ● | |
35- | 15 | 60 | - | M6 | - | 7 | - | 6 | - | 26 | - | M6 | - | 23 | - | 10 | - | 2.0 | - | 23 | - | 12 | - | - | - | ● | - | ● | - | ● | - | - |
40- | 18 | 70 | - | M8 | - | 9 | - | 7 | - | 30 | - | M6 | - | 26 | - | 12 | - | 2.0 | - | 26 | - | 13 | - | - | - | ● | - | ● | - | ● | - | - |
50- | 22 | 85 | - | M10 | - | 11 | - | 9 | - | 37 | - | M8 | - | 28 | - | 13 | - | 3.0 | - | 32 | - | 16 | - | - | - | ● | - | ● | - | ● | - | - |
D | Size Differences | Compact | Standard (P.251) | |||
B (Thickness) | D1 (O.D.) | B (Thickness) | D1 (O.D.) | B (Thickness) | D1 (O.D.) | |
10 | -7 | -5 | 8 | 30 | 15 | 35 |
12 | -7 | -5 | 8 | 30 | 15 | 35 |
15 | -7 | -10 | 8 | 30 | 15 | 40 |
16 | -7 | -10 | 8 | 30 | 15 | 40 |
20 | -7 | -10 | 8 | 35 | 15 | 45 |
25 | -5 | -8 | 10 | 42 | 15 | 50 |
30 | -3 | -5 | 12 | 50 | 15 | 55 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Loading...
Tightening Method | One Piece Clamp-On | Features | D-Cut | Side Hole Machining | None |
---|
Please check the type/dimensions/specifications of the part PSDS20 in the Shaft Collars - D cut, splined. series.
Part Number |
---|
PSDS15 |
PSDS16 |
PSDS18 |
PSDS25 |
PSDS30 |
PSDS35 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy