(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Precision Linear Shafts - Hollow, one end female threaded.
One End Tapped Precision Hollow Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 6mm - 50mm
[Length range]25mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
- inCAD Components
Part Number
Configured Part Number is shown.
[ ! ]Features of Low Temp. Black Chrome Plating >> Click here
[ ! ]L-dimension tolerance, circularity, straightness, perpendicularity, concentricity and changes in hardness >> Click here
[ ! ]Features of low temperature black chrome plating
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 10mm from wrench flats machined ends.
[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).>> Click here
[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> Click here
[ ! ]Machined areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L-dimension tolerance, circularity, straightness, perpendicularity, concentricity and changes in hardness >> Click here
[ ! ]Features of low temperature black chrome plating
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 10mm from wrench flats machined ends.
[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).>> Click here
[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> Click here
[ ! ]Machined areas may be out of O.D. tolerances due to annealing-induced deformation.
| Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |
| SPJT | SPTR | 52100 Bearing Steel Equivalent | Effective Hardened Depth of Induction Hardened >>P.112 52100 Bearing Steel Equivalent 58HRC~ SUS440C(13Cr) Stainless Steel Equivalent 56HRC~ | - |
| SSPJT | SSPTR | SUS440C(13Cr) Stainless Steel Equivalent | ||
| PSPJT | PSPTR | 52100 Bearing Steel Equivalent | Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More | |
| RSPJT | RSPTR | 52100 Bearing Steel Equivalent | Low Temp. Black Chrome Plating | |
Specifications
| Part Number | - | L | - | M | - | SC |
| SPJT20 SPTR30 | - - | 525 730 | - - | MT3 M20 | - | SC8 |
| Part Number | L 1mm Increment | M (Coarse Thread) | D Tol. | d | C | |||||
| Type | D | |||||||||
| One End Tapped Hollow Shafts | SPJT SSPJT (* marked sizes only) PSPJT RSPJT (D≤30,L≤500) | 6 | 20~600 | 3 | -0.004 -0.012 | 2 | 0.5 or Less | |||
| *8 | 20~800 (300) | 4 | *5 | -0.005 -0.014 | 3 (3) | 0.5 or Less | ||||
| *10 | 20~800 (400) | 5 | *6 | -0.005 -0.014 | 4 (4) | 0.5 or Less | ||||
| *12 | 20~1000 (500) | *8 | *T1(RC1/8) | -0.006 -0.017 | 6 (5) | 0.5 or Less | ||||
| *13 | 25~1000 (500) | *10 | *T1(RC1/8) | -0.006 -0.017 | 7 (5) | 0.5 or Less | ||||
| *16 | 30~1200 (600) | *12 | *T2(RC1/4) | -0.006 -0.017 | 10 (6) | 0.5 or Less | ||||
| *20 | 30~1200 (800) | *16 | *T3(RC3/8) | -0.007 -0.020 | 14 (8) | 1.0 or Less | ||||
| *25 | 35~1200 (1000) | *20 | -0.007 -0.020 | 16 (10) | 1.0 or Less | |||||
| *30 | 35~1500 (1000) | *20 | -0.007 -0.020 | 17 (12) | 1.0 or Less | |||||
| 35 | 35~1500 | 24 | -0.009 -0.025 | 19 | 1.0 or Less | |||||
| 40 | 50~1500 | 24 | 30 | -0.009 -0.025 | 20 | 1.0 or Less | ||||
| 50 | 60~1500 | 30 | -0.009 -0.025 | 26 | 1.0 or Less | |||||
| Part Number | L 1mm Increment | M (Coarse Thread) | Wrench Flats Dimensions | D Tol. | d | C | |||||||
| Type | D | SC | W | ℓ1 | |||||||||
| One End Tapped Hollow Shafts with Wrench Flats | SPTR SSPTR (* marked sizes only) PSPTR RSPTR (D≤30,L≤500) | 6 | 20~600 | 3 | SC=1mm Increment [ ! ]When D≤25 SC+ℓ1≤L SC≥Mx2 [ ! ]When D≥30 SC+ℓ1≤L SC≥0 [ ! ]Details of Wrench Flats P.112 | 5 | 8 | -0.004 -0.012 | 2 | 0.5 or Less | |||
| *8 | 20~800 (300) | 4 | *5 | 7 | 8 | -0.005 -0.014 | 3 (3) | 0.5 or Less | |||||
| *10 | 20~800 (400) | 5 | *6 | 8 | 8 | -0.005 -0.014 | 4 (4) | 0.5 or Less | |||||
| *12 | 20~1000 (500) | *8 | *T1(RC1/8) | 10 | 10 | -0.006 -0.017 | 6 (5) | 0.5 or Less | |||||
| *13 | 25~1000 (500) | *10 | *T1(RC1/8) | 11 | 10 | -0.006 -0.017 | 7 (5) | 0.5 or Less | |||||
| *16 | 30~1200 (600) | *12 | *T2(RC1/4) | 14 | 10 | -0.006 -0.017 | 10 (6) | 0.5 or Less | |||||
| *20 | 30~1200 (800) | *16 | *T3(RC3/8) | 17 | 10 | -0.007 -0.020 | 14 (8) | 1.0 or Less | |||||
| *25 | 35~1200 (1000) | *20 | 22 | 10 | -0.007 -0.020 | 16 (10) | 1.0 or Less | ||||||
| *30 | 35~1500 (1000) | *20 | 27 | 15 | -0.007 -0.020 | 17 (12) | 1.0 or Less | ||||||
| 35 | 35~1500 | 24 | 30 | 15 | -0.009 -0.025 | 19 | 1.0 or Less | ||||||
| 40 | 50~1500 | 24 | 30 | 36 | 20 | -0.009 -0.025 | 20 | 1.0 or Less | |||||
| 50 | 60~1500 | 30 | 41 | 20 | -0.009 -0.025 | 26 | 1.0 or Less | ||||||
[ ! ]Only * marked D and M dimensions are applicable to Stainless Steel Shafts. L and d dimensions in ( ) are applicable.
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| PSPJT6-[20-600/1]-M3 |
| PSPJT8-[20-800/1]-M[4,5] |
| PSPJT10-[20-800/1]-M[5,6] |
| PSPJT12-[20-1000/1]-M8 |
| PSPJT12-[20-1000/1]-MT1 |
| PSPJT13-[25-1000/1]-M10 |
| PSPJT13-[25-1000/1]-MT1 |
| PSPJT16-[30-1200/1]-M12 |
| PSPJT16-[30-1200/1]-MT2 |
| PSPJT20-[30-1200/1]-M16 |
| PSPJT20-[30-1200/1]-MT3 |
| PSPJT25-[35-1200/1]-M20 |
| PSPJT30-[35-1500/1]-M20 |
| PSPJT35-[35-1500/1]-M24 |
| PSPJT40-[50-1500/1]-M[24,30] |
| PSPJT50-[65-1500/1]-M30 |
| PSPTR6-[20-600/1]-M3-SC[6-592/1] |
| PSPTR8-[20-800/1]-M[4,5]-SC[8-792/1] |
| PSPTR10-[20-800/1]-M[5,6]-SC[10-792/1] |
| PSPTR12-[20-1000/1]-M8-SC[16-990/1] |
| PSPTR12-[20-1000/1]-MT1-SC[16-990/1] |
| PSPTR13-[25-1000/1]-M10-SC[20-990/1] |
| PSPTR13-[25-1000/1]-MT1-SC[20-990/1] |
| PSPTR16-[30-1200/1]-M12-SC[24-1190/1] |
| PSPTR16-[30-1200/1]-MT2-SC[24-1190/1] |
| PSPTR20-[30-1200/1]-M16-SC[32-1190/1] |
| PSPTR20-[30-1200/1]-MT3-SC[32-1190/1] |
| PSPTR25-[35-1200/1]-M20-SC[40-1190/1] |
| PSPTR30-[35-1500/1]-M20-SC[0-1485/1] |
| PSPTR35-[35-1500/1]-M24-SC[0-1485/1] |
| PSPTR40-[50-1500/1]-M[24,30]-SC[0-1480/1] |
| PSPTR50-[65-1500/1]-M30-SC[0-1480/1] |
| RSPJT6-[20-500/1]-M3 |
| RSPJT8-[20-500/1]-M[4,5] |
| RSPJT10-[20-500/1]-M[5,6] |
| RSPJT12-[20-500/1]-M8 |
| RSPJT12-[20-500/1]-MT1 |
| RSPJT13-[25-500/1]-M10 |
| RSPJT13-[25-500/1]-MT1 |
| RSPJT16-[30-500/1]-M12 |
| RSPJT16-[30-500/1]-MT2 |
| RSPJT20-[30-500/1]-M16 |
| RSPJT20-[30-500/1]-MT3 |
| RSPJT25-[35-500/1]-M20 |
| RSPJT30-[35-500/1]-M20 |
| RSPTR6-[20-500/1]-M3-SC[6-500/1] |
| RSPTR8-[20-500/1]-M[4,5]-SC[8-500/1] |
| RSPTR10-[20-500/1]-M[5,6]-SC[10-500/1] |
| RSPTR12-[20-500/1]-M8-SC[16-500/1] |
| RSPTR12-[20-500/1]-MT1-SC[16-500/1] |
| RSPTR13-[25-500/1]-M10-SC[20-500/1] |
| RSPTR13-[25-500/1]-MT1-SC[20-500/1] |
| RSPTR16-[30-500/1]-M12-SC[24-500/1] |
| RSPTR16-[30-500/1]-MT2-SC[24-500/1] |
| RSPTR20-[30-500/1]-M16-SC[32-500/1] |
| RSPTR20-[30-500/1]-MT3-SC[32-500/1] |
| RSPTR25-[35-500/1]-M20-SC[40-500/1] |
| RSPTR30-[35-500/1]-M20-SC[0-500/1] |
| SPJT6-[20-600/1]-M3 |
| SPJT8-[20-800/1]-M[4,5] |
Loading...
Example
Basic Information
| Basic Shape | Hollow | End Shape (Left) | Tapped | End Shape (Right) | No Machining |
|---|---|---|---|---|---|
| Shaft Fits Tolerance | g6 |
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Finish
- None
- Hard Chrome
- Low Temperature Black Chrome
-
Length L(mm)
-
Coarse Thread [M](mm)
-
SC(mm)
-
Tapered Thread Machining [MT] 1 (RC1/8) 2 (RC1/4) 3 (RC3/8)
-
type
- PSPJT
- PSPTR
- RSPJT
- RSPTR
- SPJT
- SPTR
- SSPJT
- SSPTR
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
- 15 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked questions (FAQ)
- 質問: Will the inner surface be hard chrome plated?
- 回答: No, the inner surface will not be plated. For more information please look at: https://us.misumi-ec.com/pdf/fa/2012/p1_0097.pdf
Additional Products in this Category
- Precision Linear Shafts - Both ends male threaded, undercut.
- Precision Linear Shafts - One end threaded one end tapped.
- Precision Linear Shafts - One end threaded, one end tapped, undercut.
- Precision Linear Shafts - Both ends stepped, tapped / non.
- Precision Linear Shafts - Hollow, both ends stepped.
- Precision Linear Shafts - Both ends stepped, female threaded end (inch).
- Pre-Cut Straight Linear Shaft - Metric
- Precision Linear Shafts - Straight, raw, chrome plated, Thomson (inches).
Complementary Products
-
Shaft Supports - T-shape, slim body, with top groove. Shaft adjustment with screw.
MISUMI Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy