(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 5/25/2024 to 6:00 p.m. (CDT) 5/26/2024. We apologize for the inconvenience.
Floating Joints - Quick Connection Type - Cylinder Connector Configurable Length [Tapped]
![Floating Joints - Quick Connection Type - Cylinder Connector Configurable Length [Tapped]](http://mx.misumi-ec.com/en/linked/material/mech/MSM1/PHOTO/10302601230.jpg?$product_main$)
- New Products
New, 1045 carbon steel with hard chrome plating. Lower in cost and better appearance than the predecessor.
- inCAD Components
Part Number
Configured Part Number is shown.
![Floating Joints - Quick Connection Type - Cylinder Connector Configurable Length [Tapped]:Related Image](http://mx.misumi-ec.com/en/linked/item/10302601230/img/drw_01_001.gif)
・Materials
[ ! ]For FJRSWL, see eCatalog.
[ ! ]Salt-bath Nitriding may cause uneven color, which doesn't affect mechanical function.
[ ! ]For details of Salt-bath Nitriding, see Click here
[ ! ]No Salt-bath Nitriding Treatment on the Thread End of FJRL.
| Type | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness |
| FJGF | 1045 Carbon Steel | Hard Chrome Plating | 750HV~ |
| FJRL | 1045 Carbon Steel | Salt-bath Nitriding | 500HV~ |
[ ! ]Salt-bath Nitriding may cause uneven color, which doesn't affect mechanical function.
[ ! ]For details of Salt-bath Nitriding, see Click here
[ ! ]No Salt-bath Nitriding Treatment on the Thread End of FJRL.
Specifications
| Part Number | - | T | - | L |
| FJGF4-0.7 | - | 4.5 | - | 15 |
| Part Number | - | T | - | L |
| FJRL4-0.7 | - | 8 | - | 20 |
■T / L Configurable
[ ! ]When h+T+L≤3M, the tapped hole may go through.
[ ! ]FJGF is a floating connector for air cylinders.
| Part Number | T 0.1mm Increment | L 1mm Increment | h | D | B | C | Unit Price | |
| Type | M-Pitch | |||||||
| FJGF | 3-0.5 | 2.0~20.0 | 3~10 | 3 | 6 | 8 | 9.2 | |
| 4-0.7 | 2.0~20.0 | 3~20 | 7 | 10 | 11.5 | |||
| 5-0.8 | 2.0~20.0 | 3~20 | 8 | 12 | 13.9 | |||
| 6-1.0 | 3.0~20.0 | 4~30 | 4 | 10 | 14 | 16.2 | ||
| 8-1.0 | 3.0~20.0 | 4~30 | 13 | 17 | 19.6 | |||
| 8-1.25 | 3.0~20.0 | |||||||
| 10-1.25 | 3.0~20.0 | 4~40 | 16 | 21 | 24.2 | |||
| 10-1.5 | 3.0~20.0 | |||||||
| 12-1.25 | 4.0~20.0 | 5~40 | 18 | 23 | 26.6 | |||
| 12-1.5 | 4.0~20.0 | |||||||
| 14-1.5 | 4.0~20.0 | 5~40 | 21 | 26 | 30 | |||
| 16-1.5 | 8.0~30.0 | 8~40 | 5 | 25 | 30 | 34.6 | ||
| 18-1.5 | 8.0~30.0 | 8~40 | ||||||
| 22-1.5 | 10.0~30.0 | 10~40 | 6 | 27 | 32 | 36.9 | ||
[ ! ]FJGF is a floating connector for air cylinders.
Example of T Dimension Configuring Method
• Configure T Dimension when using an Original Holder/Flat Bar combination.
• It is possible to minimize backlash by "Size Configuration allowing for Groove Width/Allowance".
• Configure T Dimension when using an Original Holder/Flat Bar combination.
• It is possible to minimize backlash by "Size Configuration allowing for Groove Width/Allowance".
■Example of Connector T Dimensions for Connection to Flat Bar Unit: mm
| Processing Method | Plate Thickness | Tolerance | Connector T Dimension | Backlash* | |
| Upper Limit | Lower Limit | ||||
| Ex. 1 Cold Rolling | 4.5 | 0 | -0.1 | 4.5 | 0.05~0.2 |
| Ex. 2 Hot Rolling | 5 | +0.3 | -0.3 | 5.3 | 0.05~0.7 |
* Clearance for tolerance between Flat Bar and Connector
■T Selection / L Configurable
[ ! ]For compatible holders, see HLRAF (P.3644).
[ ! ]When h+T+L≤3M, the tapped hole may go through.
| Part Number | T Selection | L 1mm Increment | h | D | B | (C) | Unit Price | ||||||||||||||
| Type | M-Pitch | ||||||||||||||||||||
| FJRL | 3-0.5 | 2 | 3 | 4 | 5 | 6 | 3~50 | 3 | 6 | 8 | 9.2 | ||||||||||
| 4-0.7 | 2 | 3 | 4 | 5 | 6 | 8 | 3~60 | 7 | 10 | 11.5 | |||||||||||
| 5-0.8 | 3 | 4 | 5 | 6 | 8 | 9 | 10 | 3~60 | 8 | 12 | 13.9 | ||||||||||
| 6-1.0 | 3 | 4 | 5 | 6 | 8 | 9 | 10 | 12 | 4~80 | 4 | 10 | 14 | 16.2 | ||||||||
| 8-1.0 | 4 | 5 | 6 | 8 | 9 | 10 | 12 | 13 | 15 | 16 | 4~100 | 13 | 17 | 19.6 | |||||||
| 8-1.25 | |||||||||||||||||||||
| 10-1.25 | 4 | 5 | 6 | 8 | 9 | 10 | 12 | 13 | 15 | 16 | 19 | 20 | 4~100 | 16 | 21 | 24.2 | |||||
| 10-1.5 | |||||||||||||||||||||
| 12-1.25 | 5 | 6 | 8 | 9 | 10 | 12 | 13 | 15 | 16 | 19 | 20 | 5~100 | 18 | 23 | 26.6 | ||||||
| 12-1.5 | |||||||||||||||||||||
| 14-1.5 | 5 | 6 | 8 | 9 | 10 | 12 | 13 | 15 | 16 | 19 | 20 | 5~100 | 21 | 26 | 30 | ||||||
| 16-1.5 | 8 | 9 | 10 | 12 | 13 | 15 | 16 | 19 | 20 | 8~100 | 5 | 25 | 30 | 34.6 | |||||||
| 18-1.5 | 8 | 9 | 10 | 12 | 13 | 15 | 16 | 19 | 20 | 8~100 | |||||||||||
| 22-1.5 | 12 | 15 | 20 | 10~100 | 6 | 27 | 32 | 36.9 | |||||||||||||
[ ! ]When h+T+L≤3M, the tapped hole may go through.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| FJGF3-0.5-[2-20/0.1]-[3-10/1] |
| FJGF4-0.7-[2-20/0.1]-[3-20/1] |
| FJGF5-0.8-[2-20/0.1]-[3-20/1] |
| FJGF6-1.0-[3-20/0.1]-[4-30/1] |
| FJGF8-1.0-[3-20/0.1]-[4-30/1] |
| FJGF8-1.25-[3-20/0.1]-[4-30/1] |
| FJGF10-1.5-[3-20/0.1]-[4-40/1] |
| FJGF10-1.25-[3-20/0.1]-[4-40/1] |
| FJGF12-1.5-[4-20/0.1]-[5-40/1] |
| FJGF12-1.25-[4-20/0.1]-[5-40/1] |
| FJGF14-1.5-[4-20/0.1]-[5-40/1] |
| FJGF16-1.5-[8-30/0.1]-[8-40/1] |
| FJGF18-1.5-[8-30/0.1]-[8-40/1] |
| FJGF22-1.5-[10-30/0.1]-[10-40/1] |
| FJRL3-0.5-[3,4,5,6]-[3-50/1] |
| FJRL4-0.7-[3,4,5,6,8]-[3-60/1] |
| FJRL5-0.8-[3,4,5,6,8,9,10]-[3-60/1] |
| FJRL6-1.0-[3,4,5,6,8,9,10,12]-[4-80/1] |
| FJRL8-1.0-[4,5,6,8,9,10,12,13,15,16]-[4-100/1] |
| FJRL8-1.25-[4,5,6,8,9,10,12,13,15,16]-[4-100/1] |
| FJRL10-1.5-[4,5,6,8,9,10,12,13,15,16,19,20]-[4-100/1] |
| FJRL10-1.25-[4,5,6,8,9,10,12,13,15,16,19,20]-[4-100/1] |
| FJRL12-1.5-[5,6,8,9,10,12,13,15,16,19,20]-[5-100/1] |
| FJRL12-1.25-[5,6,8,9,10,12,13,15,16,19,20]-[5-100/1] |
| FJRL14-1.5-[5,6,8,9,10,12,13,15,16,19,20]-[5-100/1] |
| FJRL16-1.5-[8,9,10,12,13,15,16,19,20]-[8-100/1] |
| FJRL18-1.5-[8,9,10,12,13,15,16,19,20]-[8-100/1] |
| FJRL22-1.5-[12,15,20]-[10-100/1] |
Loading...
More Information
![Floating Joints - Quick Connection Type - Cylinder Connector Configurable Length [Tapped]:Related Image](http://mx.misumi-ec.com/en/linked/item/10302601230/img/oth_01.gif)
It is possible to extend or adjust the join length.
![Floating Joints - Quick Connection Type - Cylinder Connector Configurable Length [Tapped]:Related Image](http://mx.misumi-ec.com/en/linked/item/10302601230/img/oth_03.gif)
Basic Information
| Type | Floating joint | Cylinder Used | Air pressure cylinders | Connection Type, Cylinder Side | Female Thread |
|---|---|---|---|---|---|
| Stud Material | 1045 Carbon Steel | AWC Alteration (Flange Cut) | No |
Specification/Dimensions
-
Connecting Thread Nominal M(mm)
- M3 ~ M8
- M10 ~ M18
- M3 ~ M8
-
Connecting Thread Nominal p(mm)
- 0.5 to 0.8
- 1 to 1.75
- 0.5 to 0.8
-
Surface Treatment
- Salt-bath Nitriding
-
L(mm)
-
T(mm)
-
type
- FJGF
- FJRL
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Floating Joints - Compact, Threaded
- Floating Joints - Compact, Extension Rod, Tapped
- Floating Joints - Compact, Extension Rod, Threaded
- Floating Connectors - Screw-In Type
- Floating Joints - Cylinder Connectors, Flange Type
- Floating Joints - Quick Connection Type - Cylinder Connector and Holder Set
- Holders - Top Mount, Flange Type
- Quick Plug Coupling With Radial Offset Compensation
Complementary Products
-
![Floating Joints - Quick Connection Type - Cylinder Connector Fixed Length [Tapped]](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/jp/product/series/110302601140/110302601140_001.jpg?$product_recommend_a$)
Floating Joints - Quick Connection Type - Cylinder Connector Fixed Length [Tapped]
MISUMI Days to Ship : Same day or more
![Floating Joints - Quick Connection Type - Cylinder Connector Fixed Length [Tapped]](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/jp/product/series/110302601140/110302601140_001.jpg?$product_recommend_a$)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy