(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Ceramic Urethane Sheets (Part Numbers)

Ceramic Urethane Sheets

MISUMI original urethane sheets with unique mixture of ceramic particles

  • METRIC
  • inCAD Components
Ceramic Urethane Sheets:Related Image
・Materials
TypeType[ M ]Material[ H ]
Hardness
Color
No AdhesiveAdhesive
Mold Surface
Type
UTSCSUTSCSACeramic Urethane
(Ether Polyurethane)
Shore A95Natural Color (Gray)
UTSCHUTSCHAShore A90
UTSCMUTSCMACeramic Urethane
(Ester Polyurethane)
Shore A70
UTSCLUTSCLAShore A50
Machined Surface
Type
UTSCSKUTSCSKACeramic Urethane
(Ether Polyurethane)
Shore A95
UTSCHKUTSCHKAShore A90
UTSCMKUTSCMKACeramic Urethane
(Ester Polyurethane)
Shore A70
UTSCLKUTSCLKAShore A50
[ ! ]Properties >> Click here
[ ! ]Mold Surface Type has glossy smooth surface but not slippery.
Machined Surface Type has ground surface on one side improving sliding property.
■Accuracy Standards
T Dimension Tolerance
TTolerance
Mold Surface TypeMachined Surface Type
2~4±0.3±0.5
5~10±0.4
A, B Tolerance
A, BTolerance
200 or Less±0.5
201~300±1.0
301~400±1.2
401~500±1.5

Specifications

■Standard
Part Number-A-B
UTSCLK5-100-30
■Hole Type
Part Number-A-B-F-G-Screw Nominal Dia.
UTSCMK2H5-100-50-F80-G25-N3
■Standard Type, Mold Surface
Part Number1mm Increment
TypeTAB
210~50010~500
No AdhesiveAdhesive3
UTSCSUTSCSA(Shore A95)4
UTSCHUTSCHA(Shore A90)5
UTSCMUTSCMA(Shore A70)6
UTSCLUTSCLA(Shore A50)8
10
■Standard Type, Machined Surface
Part Number1mm Increment
TypeTAB
No Adhesive
UTSCSK
UTSCHK
UTSCMK
UTSCLK
Adhesive
UTSCSKA
UTSCHKA
UTSCMKA
UTSCLKA

(Shore A95)
(Shore A90)
(Shore A70)
(Shore A50)
310~20010~200
4
5
6
8
10
■Hole Type, Mold Surface
Part Number1mm Increment (A≥B≥T)0.5mm IncrementScrew Nominal Dia.
TypeNominalTABFGN (Through Hole)Z (Counterbored Hole)
Mold Surface Type1H

2H

3H

4H

6H
225~50025~5009~491
(1H, 2H, 4H)

9~245
(3H, 6H)
5~495
(1H, 2H, 3H)

9~491
(4H, 6H)
3
4
5
6
8
10
-
No Adhesive
UTSCS
UTSCH
UTSCM
UTSCL
Adhesive
UTSCSA
UTSCHA
UTSCMA
UTSCLA

(Shore A95)
(Shore A90)
(Shore A70)
(Shore A50)
3-
4-
5-
6-
83
1034
■Hole Type, Machined Surface
Part Number1mm Increment (A≥B≥T)0.5mm IncrementScrew Nominal Dia.
TypeNominalTABFGN (Through Hole)Z (Counterbored Hole)
Machined Surface Type1H

2H

3H

4H

6H
325~30025~2009~291
(1H, 2H, 4H)

9~145
(3H, 6H)
5~195
(1H, 2H, 3H)

9~191
(4H, 6H)
3
4
5
6
8
10
-
No Adhesive
UTSCSK
UTSCHK
UTSCMK
UTSCLK
Adhesive
UTSCSKA
UTSCHKA
UTSCMKA
UTSCLKA

(Shore A95)
(Shore A90)
(Shore A70)
(Shore A50)
4-
5-
6-
83
1034
■Hole Machining Charge
Hole TypeScrew Nominal
N (Through Hole)Z (Counterbored Hole)
1H100150
2H200250
3H300350
4H400500
6H600750
(Ex.)
Part Number-A-B-F-G-Screw Nominal Dia.
UTSCMK2H5-100-50-F80-G25-N3

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
UTSCH1H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH1H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH1H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH1H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH1H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH1H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH1H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z3
UTSCH1H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH1H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[3,​4]
UTSCH2-[10-500/1]-[10-500/1]
UTSCH2H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH2H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH2H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH2H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH2H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH2H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH2H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z3
UTSCH2H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH2H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[3,​4]
UTSCH3-[10-500/1]-[10-500/1]
UTSCH3H2-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH3H3-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH3H4-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH3H5-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH3H6-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH3H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH3H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z3
UTSCH3H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH3H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[3,​4]
UTSCH4-[10-500/1]-[10-500/1]
UTSCH4H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH4H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH4H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH4H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH4H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH4H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH4H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-Z3
UTSCH4H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH4H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-Z[3,​4]
UTSCH5-[10-500/1]-[10-500/1]
UTSCH6-[10-500/1]-[10-500/1]
UTSCH6H2-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH6H3-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH6H4-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH6H5-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH6H6-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH6H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH6H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-Z3
UTSCH6H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCH6H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-Z[3,​4]
UTSCH8-[10-500/1]-[10-500/1]
UTSCH10-[10-500/1]-[10-500/1]
UTSCHA1H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA1H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA1H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA1H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA1H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA1H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA1H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z3
UTSCHA1H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA1H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[3,​4]
UTSCHA2-[10-500/1]-[10-500/1]
UTSCHA2H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA2H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA2H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA2H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA2H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA2H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA2H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z3
UTSCHA2H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA2H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[3,​4]
UTSCHA3-[10-500/1]-[10-500/1]
UTSCHA3H2-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA3H3-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA3H4-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA3H5-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA3H6-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA3H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA3H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z3
UTSCHA3H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA3H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[3,​4]
UTSCHA4-[10-500/1]-[10-500/1]
UTSCHA4H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA4H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA4H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA4H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA4H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA4H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCHA4H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-Z3
UTSCHA4H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSAdhesive Tape Thickness T
(mm)
Width A
(mm)
Length B
(mm)
Hardness (Shore, Asker, Penetration) Specifications Hole Machining Counterbored Hole Nominal Dia. [Z] F
(mm)
G
(mm)
Through Hole Nominal Dia. [N]
1 Piece(s)

10 Days or more

10W/o Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)39 ~ 4915 ~ 495-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)3 ~ 49 ~ 4915 ~ 495-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape210 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10W/o Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)39 ~ 4915 ~ 495-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)3 ~ 49 ~ 4915 ~ 495-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape310 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10W/o Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)39 ~ 2455 ~ 495-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)3 ~ 49 ~ 2455 ~ 495-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape410 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10W/o Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)39 ~ 4915 ~ 491-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)3 ~ 49 ~ 4915 ~ 491-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape510 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10W/o Adhesive Tape610 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10W/o Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)39 ~ 2455 ~ 491-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)6H (Six Holes)3 ~ 49 ~ 2455 ~ 491-
1 Piece(s)

10 Days or more

10W/o Adhesive Tape810 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10W/o Adhesive Tape1010 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10With Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)39 ~ 4915 ~ 495-
1 Piece(s)

10 Days or more

10With Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)1H (1-Hole)3 ~ 49 ~ 4915 ~ 495-
1 Piece(s)

10 Days or more

10With Adhesive Tape210 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10With Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)39 ~ 4915 ~ 495-
1 Piece(s)

10 Days or more

10With Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)-9 ~ 4915 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)2H (Two Holes)3 ~ 49 ~ 4915 ~ 495-
1 Piece(s)

10 Days or more

10With Adhesive Tape310 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10With Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)39 ~ 2455 ~ 495-
1 Piece(s)

10 Days or more

10With Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)-9 ~ 2455 ~ 4953 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)3H (Three Holes)3 ~ 49 ~ 2455 ~ 495-
1 Piece(s)

10 Days or more

10With Adhesive Tape410 ~ 50010 ~ 500Shore A90Mold Surface Type (Standard Type)No Drilling Alteration----
1 Piece(s)

10 Days or more

10With Adhesive Tape225 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape325 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape425 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape525 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape625 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10
1 Piece(s)

10 Days or more

10With Adhesive Tape825 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)39 ~ 4915 ~ 491-
1 Piece(s)

10 Days or more

10With Adhesive Tape1025 ~ 50025 ~ 500Shore A90Mold Surface Type (Hole Machining Type)4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10

Loading...

More Information

Ceramic Urethane Sheets:Related Image
 

Basic Information

Material, General Urethane Material, Details Ceramic Urethane

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.