(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Ball Screw Support Unit - Fixed Side, Block Type, with 4 Mounting Holes.

Ball Screw Support Unit - Fixed Side, Block Type, with 4 Mounting Holes.
  • Volume Discount

Most compact support units.
For complete product overview and details on Ball Screw Support Units - Fixed Side, Square, 4 Mounting Holes see the sections below:

  • inCAD Components
Support Units -Square- -Fixed Side 4 Mounting Holes-:Related Image
・Materials
Type[ M ]Material[ S ]Surface Treatment
①③⑥⑦①③⑥⑦
BSA1045 Carbon Steel1018 Carbon SteelBlack Oxide
BSAMElectroless Nickel Plating
[ ! ]Compact width design.
 

Specifications

Part Number
BSQM8
BSV10S
BSA12
■Component Details
NumberPart NameQuantity
Bearing Housing1
Angular Contact Bearing Class 51 Set
Cover1
Oil Seal2
Hex Socket Head Cap Screw*4
Collar1
Clamping Nut (with Set Piece)1
[ ! ]Do not disassemble ①, ②, ③ and ④, as they must remain as an assembled unit.
* Screw ⑤ for BSAM is Stainless Steel Type.
[ ! ]For No.10S, the I.D. of oil seal is smaller than the previous version.
[ ! ]The screw head ⑤ protrudes 2mm from the cover.
Part NumberdLL1L2L3BHhB1H1PCd1M (Fine)TOil Seal Applicable Shaft Dia.
TypeNo.
BSA
BSAM
10S1025429.55603922342146136.6M10x1.01712
1014
121225429.5560432535244613M12x1.01915
151527638670482840275415M15x1.02220

More Information

[ ! ]For details of Bearings in addition to mounting interface accuracies of Support Units, >> Click here
[ ! ]Ball Screw Compatibility Chart >> Click here
[ ! ]Store Accessories with care since it is required when assembling.

Technical Information

Combination of Ball Screws and Support Units

It is necessary to verify compatibility when selecting ball screw support units.

When selecting Support Units for Ball Screws, note that it can be combined if dimensions of bearing installation part on Fixed Side of the Ball Screw [Fig. 1] and bearing I.D of the Support Unit [Fig. 2] are the same.

How to Select Support Units Compatible with Ball Screw?

To ensure compatibility of the support unit with ball screw, it is recommended to follow the steps indicated in the table below.(Example: Ball Screw Series BSS1505 and Support Unit BSW12, this same methodology can be used to configure other ball screw series and support units).

  • Step 1 - Confirm that shaft diameter of the Ball Screw (Example: 15 mm).
  • Step 2 - Confirm that dimension of the bearing installation part on fixed side of the Ball Screw (Example: 12mm).
  • Step 3 - Determine that corresponding bearing I.D of the Support Unit (Example No.12).
Ball Screw Part NumberAccuracy class C3BSX0601-BSX0801
BSX0802
BSX1002
-BSX1202
BSX1205
BSX1505---
Accuracy class C5-BSS1002
BSS0802
BSS1202
BSS1004
BSS1205
BSS1204
BSS1210
BSS1010Step 2
BSS15□□
BSS20□□BSS25□□-
Accuracy class C7BSST08022BSSE1002
BSST1004
BSSE0802
BSSE1202
BSSE1004
BSSE1205
BSSE1210
BSST12004
C-BSST1204
-BSSE15□□
BSST15□□
BSSE20□□
BSST20□□
BSSE25□□
BSST25□□
-
Accuracy class C10BSSR08□□
BSSZ08□□
C-BSS0802
BSSR10□□
BSSZ10□□
-BSSR12□□
BSSZ12□□
BSSC1204
BSSR1405
BSSZ1405
BSSR15□□
BSSZ15□□
BSRB15□□
BSSR20□□
BSSZ20□□
BSBR20□□
BSSR25□□
BSSZ25□□
BSBR25□□
BSSR28□□
BSSZ28□□
BSSR32□□
BSSZ32□□
Bearing Installation Part on Ball Screw Fixed SideØ6Ø8Ø10Step 2
Ø12
Ø15Ø20Ø25
Support Units Bearing I.DNo.6No.8SNo.8No.10SNo.1022Step 3
No.12
152No.20*No.25
No.6LNo.10No.15*

* Except C-BSFW15 and 20, C-BUFN15 and 20

Shape of Support Units

Square
Round

Lineup of Fixed-side and Support-side Support Units

The Fixed side is the side that secures the ball screw shaft. The fixed side normally stands for the side that the motor is installed.

The Support side merely supports the ball screw shaft, and is not fixed to a ball screw shaft.

ShapeFeautureFixed Side ProductPhotoFixed Side ProductPhotoCustomer Merit
SquareStandardStandardStandardIndustry standard
For use in a limited spaceCompactCompactEasy to use in a limited width space.
Suitable for small devices.
Low ProfileLow ProfileLower profile linear motion units can be made.
Recommended to use it together with Compact Nut.
Small Mounting Hole PitchSmall Mounting Hole PitchEasy to use in a limited width space.
Suitable for small devices.
Reducing Assembly Man-hourStandard Type with Dowel HolesStandard Type with Retaining Ring[BSWG/BSWGN] Easy locating of the housing.
[BTN/BTNM] Easy to assemble while preventing the bearing from falling off.
Standard Type with DamperStandard Type with DamperUnnecessary to design a damper mechanism.
AC Servo Motor Brackets--Ball screws and motors shaft centering are secured by only mounting and aligning a motor with a build-in pilot.
RoundStandardStandardStandardIndustry standard
Reducing Assembly Man-hour--Standard Type with Retaining RingEasy to assemble it while preventing bearings for Support Units from falling off.

Installation process

For information about the installation process of ball screw support units, inspection considerations and precautions, click here.

Precautions on Support Unit Installation

When inserting ball screws into fixed side support units, some cases will be slip-fit and others may be light press-fit cases.

In case of a light-press fit, do not force the bearing onto the screw shaft in a tilted manner, or do not strike the bearing inner ring and support unit housing

If there is any irregularities between the screw shaft and bearing inner ring, do not insert the ball screw forcibly, remove the screw at once and correct the swell on the shaft, then try reassembling.

Compatible Models

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BSA10
BSA10S
BSA12
BSA15
BSAM10
BSAM10S
BSAM12
BSAM15
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSShaft Dia. d
(Ø)
Surface Treatment Shaft Height H
(mm)
Thickness L (or F)
(mm)
Width B
(mm)
Basic Load Rating, Dynamic Rating
(N)
Basic Load Rating, Static Rating
(N)
Oil Seal Applicable Shaft Dia.
(φ)
1 Piece(s)Available

8 Days or more

1010Black Oxide2225607500415014
1 Piece(s)Available

8 Days or more

1010Black Oxide2225607500415012
1 Piece(s)Available

8 Days or more

1012Black Oxide2525608200490015
1 Piece(s)Available

8 Days or more

1015Black Oxide2827709400630020
1 Piece(s)Available

8 Days or more

1010Electroless Nickel2225607500415014
1 Piece(s)Available

8 Days or more

1010Electroless Nickel2225607500415012
1 Piece(s)Available

8 Days or more

1012Electroless Nickel2525608200490015
1 Piece(s)Available

8 Days or more

1015Electroless Nickel2827709400630020

Loading...

  1. 1
 

Basic Information

Cost Efficient Standard Type Fixed Side Mounting Hole Narrow Pitch Type Shape Square Type
Mounting Method From Top Bearing Type Angular Contact Bearing Bearing Precision Class 5 (ABEC-5)
Material 1045 Carbon Steel Set Fixed Side Only

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.