(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Linear Ball Bushings - With pilot flange, single compact, threaded mounting holes. (LHITS8G)

Linear Ball Bushings - With pilot flange, single compact, threaded mounting holes. LHITS8G
  • Volume Discount

New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Allows to reduce the cost for tapping, takes effect in connecting soft materials and can be screw-tightened from above.

  • METRIC
Flanged Linear Bushings - Compact, Pilot, Single, With Threaded Mounting Holes:Related Image
・Materials
TypeOuter CylinderBallsRetainerAmbient Operating Temp.[ A ]Accessories
Round FlangeSquare FlangeCompact Flange[ M ]Material[ H ]Hardness[ S ]Surface Treatment[ M ]Material[ M ]Material
LHITRLHITSLHITC52100 Bearing Steel 58HRC~-52100 Bearing Steel Plastic
(Duracon M90)
-20~80°CSeal[ M ]Material
Nitrile Rubber
(-20~120°C)

Specifications

Part Number 
LHMRKW12
Flanged Linear Bushings - Compact, Pilot, Single, With Threaded Mounting Holes:Related Image LHMRKW12L
Flanged Linear Bushings - Compact, Pilot, Single, With Threaded Mounting Holes:Related Image LHMRKW12G
Flanged Linear Bushings - Compact, Pilot, Single, With Threaded Mounting Holes:Related Image LHMRKW12H

(L Type Greased)
(G Type Greased)
(H Type Greased)
Alternative grease types available.
For Days to Ship, Price and Performance, see >> Click here
drDLHTMP.C.D.WFAEccentricityBalls
Rows
* PerpendicularityBasic Load RatingMass (g)
 Tolerance Tolerance ToleranceC (Dynamic) NCo (Static) NRound FlangeSquare FlangeCompact Flange
60
-0.009
120
-0.013
19±0.35285M32022-200.01240.012206265241821
81524322425-24265380372933
10190
-0.016
296406M42930-29372549725264
122130423232-32412598765768
16283748383722317751180120104112
200
-0.010
320
-0.019
428548M5434224360.01550.0158821370180145167
254059625150324069801570340300325
304564107410M66058354915702740470375388
[ ! ]For Precautions for Use, see >> Click here
* Perpendicularity of D part to flange mounting surface kgf=Nx0.101972

Price list

drUnit Price
Center Flanged DoubleWith Tapped Hole, Pilot
Round FlangeSquare FlangeCompact FlangeRound FlangeSquare FlangeCompact Flange
LHMRKWLHMSKWLHMCKWLHITRLHITSLHITC
61,7702,1301,840690810770
81,7702,1301,840690810780
101,8502,1901,890710840810
121,9702,3502,010760880860
162,5002,9802,5109401,1001,060
20---1,1201,3101,270
25---1,5601,8401,780
30---2,1702,5602,430
Volume Discount Rate ([ ! ]Round down to nearest one yen) P.89
Quantity1~1920~3435~49
Discount RateUnit Price5%10%
Days to ShipStandardTo Be Quoted
[ ! ]For orders larger than indicated quantity, please request a quotation.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
LHITS8G
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSFor Shaft Size
(mm)
Overall Length L
(mm)
Lubrication Type O.D. D
(mm)
Basic Dynamic Load Rating (Details)
(N)
Basic Static Load Rating
(N)
Inner Contact Circle Tolerance (Negative Side)
(mm)
Eccentricity
(µm)
Flange Shape Greased filled
1 Piece(s)Available

12 Days or more

10824[Grease coating] G Type (Low Dust Generation)15265380-0.00912Square FlangedType G (Low Particlate)

Loading...

  1. 1

Example

Flanged Linear Bushings - Compact, Pilot, Single, With Threaded Mounting Holes:Related Image

Technical Information

Applications for Different Types of Grease

TypeProduct NameMain Characteristic
Type LET-100K (Made by Kyodo Yushi)Excellent heat resistance and oxidation stability. Also high adhesion and cohesion with limited spatter or leakage.
Type GLG2 (Made by NSK Ltd.)Suitable for clean environments due to low particle generation grease. Also good anti-rust properties.
Type HFGL (Lubriplate)Suitable for the pharmaceutical, food and beverage industry (NSF H-1 Reg. NO.043534).

Support Information

Reference: Tolerance Range of Linear Bushing and Shafts made by MISUMI

For MISUMI Linear Bushing, it is recommended to use the combination with MISUMI Shafts (hardened to g6 tolerance).

H6H7H8H9Applicable PartFunctional ClassificationApplication Example
Can be Moved RelativelyClearance FitRoll Fitf6f7f7
f8
Fitted to provide adequate clearance to permit movement (high quality fit).
Regular normal temperature bearing lubricated with grease or oil.
Regular Fitting (Often comes apart.)Part into which a cooled exhaust valve box is inserted.
Regular Shaft and Bushing
Link lever and bushing
Fine Roll Fitg5g6Continuously revolving part of a precision machine under a light load.
Fitting with a narrow gap so as to permit movement (spigot and positioning).
Precision sliding part.
Part required for precise motion with virtually no backlash.Link Device Pin and Lever
Key and its groove
Precision control valve rod
Cannot be Moved RelativelyTransition FitSliding Fith5h6h7
h8
h9Fitting so as to permit movement by hand, with a lubricant applied (high-quality positioning).
Special High Precision Sliding Part
Unimportant Stationary Part
Can be disassembled and reassembled without damaging components.Force cannot be transmitted by the fitting force alone.Fitting a rim and a boss together
Fitting the gear of a precision gear device
Push Fith5
h6
js6Fitting that accommodates a slight gap.
Precision fitting that locks both parts during use.
Fitting that allows assembly and disassembly with a wooden or lead hammer.
Fitting Coupling Flanges Together
Governor Path and Pin
Fitting a Gear Rim and a Boss Together
 

Basic Information

TYPE Pilot Flange Motion Linear Motion Style Standard
Outer Cylinder Material 52100 Bearing Steel Equivalent Outer Cylinder Surface Finish None Flange Type Pilot Flanged
Length Single Ball Recirculating Type Single Precision High Grade
Ball Material 52100 Bearing Steel Equivalent Retainer Material Plastic (Duracon M90 Equivalent) Seals With Seal
Counterbored Hole Standard

Please check the type/dimensions/specifications of the part LHITS8G in the Linear Ball Bushings - With pilot flange, single compact, threaded mounting holes. series.

Products like this...

Part Number
LHITC10H
LHITC10L
LHITC12
LHITC12G
LHITS8H
LHITS8L
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSFor Shaft Size
(mm)
Overall Length L
(mm)
Lubrication Type O.D. D
(mm)
Basic Dynamic Load Rating (Details)
(N)
Basic Static Load Rating
(N)
Inner Contact Circle Tolerance (Negative Side)
(mm)
Eccentricity
(µm)
Flange Shape Greased filled
1 Piece(s)Available

12 Days or more

101029[Grease coating] H Type (For Food/Beverages)19372549-0.00912Compact FlangedType H (For Food and Beverages)
1 Piece(s)Available

12 Days or more

101029[Grease coating] L Type (Heat Resistant)19372549-0.00912Compact FlangedType L (Heat Resistance)
1 Piece(s)Available

8 Days or more

101230Standard21412598-0.00912Compact FlangedStandard (Rust Prevent Oil)
1 Piece(s)Available

12 Days or more

101230[Grease coating] G Type (Low Dust Generation)21412598-0.00912Compact FlangedType G (Low Particlate)
1 Piece(s)Available

12 Days or more

10824[Grease coating] H Type (For Food/Beverages)15265380-0.00912Square FlangedType H (For Food and Beverages)
1 Piece(s)Available

12 Days or more

10824[Grease coating] L Type (Heat Resistant)15265380-0.00912Square FlangedType L (Heat Resistance)

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.