(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Linear Ball Bushings - With pilot flange, single compact, reamed mounting holes. (LHISK12G)

Linear Ball Bushings - With pilot flange, single compact, reamed mounting holes. LHISK12G
  • Volume Discount

New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.

  • METRIC
Flanged Linear Bushings - Compact, Pilot, Single, With C-Bored Mounting Holes:Related Image
[ ! ]For Pilotted and Flanged Type application examples, see >> Click here
・Materials
TypeOuter CylinderBallsRetainerAmbient Operating Temp.[ A ]Accessories
Round FlangeSquare FlangeCompact Flange[ M ]Material[ H ]Hardness[ S ]Surface Treatment[ M ]Material[ M ]Material
LHIRKLHISKLHICK52100 Bearing Steel 58HRC~-52100 Bearing Steel Plastic
(Duracon M90)
-20~80°CSeal [ M ]Material
Nitrile Rubber
(-20~120°C)

Specifications

Part Number
LHIRKW12
Flanged Linear Bushings - Compact, Pilot, Single, With C-Bored Mounting Holes:Related ImageLHIRKW12L
Flanged Linear Bushings - Compact, Pilot, Single, With C-Bored Mounting Holes:Related ImageLHIRKW12G
Flanged Linear Bushings - Compact, Pilot, Single, With C-Bored Mounting Holes:Related ImageLHIRKW12H

(L Type Greased)
(G Type Greased)
(H Type Greased)
Alternative grease types available.
For Days to Ship, Price and Performance, see >> Click here
drDLHTdd1trP.C.D.WFAEccentricityBalls
Rows
* PerpendicularityBasic Load RatingMass (g)
ToleranceToleranceToleranceC (Dynamic) NCo (Static) NRound FlangeSquare FlangeCompact Flange
60
-0.009
100
-0.011
19±0.352553.563.131920-190.01260.012131155181415
8130
-0.013
24282223-22235277272224
10172963564.57.54.13.752727-27368433524146
12190
-0.016
30383029-30381449645055
1626374436342427608716967783
[ ! ]For Precautions for Use, see >> Click here
* Perpendicularity of D part to flange mounting surface kgf=Nx0.101972

Price list

drUnit Price
SingleDouble
Round FlangeSquare FlangeCompact FlangeRound FlangeSquare FlangeCompact Flange
LHIRKLHISKLHICKLHIRKWLHISKWLHICKW
69701,1301,0901,7602,0801,980
89701,1301,0901,7602,0801,980
109901,1801,1301,8102,1302,050
121,0601,2301,2001,9302,3002,190
161,3201,5401,4802,4202,8802,730
Volume Discount Rate ([ ! ]Round down to nearest one cent.) P.89
Quantity1~1920~3435~49
Discount RateUnit Price5%10%
Days to ShipStandardTo Be Quoted
[ ! ]For orders larger than indicated quantity, please request a quotation.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
LHISK12G
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSFor Shaft Size
(mm)
Overall Length L
(mm)
Lubrication Type O.D. D
(mm)
Basic Dynamic Load Rating (Details)
(N)
Basic Static Load Rating
(N)
Flange Shape Greased filled
1 Piece(s)Available

12 Days or more

101230[Grease coating] G Type (Low Dust Generation)19381449Square FlangedType G (Low Particlate)

Loading...

  1. 1

More Information

Flanged Linear Bushings - Compact, Pilot, Single, With C-Bored Mounting Holes:Related Image
For Days to Ship, Price and Performance, see >> Click here

Technical Information

Applications for Different Types of Grease

TypeProduct NameMain Characteristic
Type LET-100K (Made by Kyodo Yushi)Excellent heat resistance and oxidation stability. Also high adhesion and cohesion with limited spatter or leakage.
Type GLG2 (Made by NSK Ltd.)Suitable for clean environments due to low particle generation grease. Also good anti-rust properties.
Type HFGL (Lubriplate)Suitable for the pharmaceutical, food and beverage industry (NSF H-1 Reg. NO.043534).

Support Information

Reference: Tolerance Range of Linear Bushing and Shafts made by MISUMI

For MISUMI Linear Bushing, it is recommended to use the combination with MISUMI Shafts (hardened to g6 tolerance).

H6H7H8H9Applicable PartFunctional ClassificationApplication Example
Can be Moved RelativelyClearance FitRoll Fitf6f7f7
f8
Fitted to provide adequate clearance to permit movement (high quality fit).
Regular normal temperature bearing lubricated with grease or oil.
Regular Fitting (Often comes apart.)Part into which a cooled exhaust valve box is inserted.
Regular Shaft and Bushing
Link lever and bushing
Fine Roll Fitg5g6Continuously revolving part of a precision machine under a light load.
Fitting with a narrow gap so as to permit movement (spigot and positioning).
Precision sliding part.
Part required for precise motion with virtually no backlash.Link Device Pin and Lever
Key and its groove
Precision control valve rod
Cannot be Moved RelativelyTransition FitSliding Fith5h6h7
h8
h9Fitting so as to permit movement by hand, with a lubricant applied (high-quality positioning).
Special High Precision Sliding Part
Unimportant Stationary Part
Can be disassembled and reassembled without damaging components.Force cannot be transmitted by the fitting force alone.Fitting a rim and a boss together
Fitting the gear of a precision gear device
Push Fith5
h6
js6Fitting that accommodates a slight gap.
Precision fitting that locks both parts during use.
Fitting that allows assembly and disassembly with a wooden or lead hammer.
Fitting Coupling Flanges Together
Governor Path and Pin
Fitting a Gear Rim and a Boss Together
 

Basic Information

TYPE Pilot Flange Motion Linear Motion Style Standard
Outer Cylinder Material 52100 Bearing Steel Equivalent Outer Cylinder Surface Finish None Flange Type Pilot Flanged
Length Single Ball Recirculating Type Single Precision High Grade
Inner Contact Circle Tolerance (Negative Side)(mm) -0.009 Eccentricity(µm) 12 Ball Material 52100 Bearing Steel Equivalent
Retainer Material Plastic (Duracon M90 Equivalent) Seals With Seal Counterbored Hole Standard

Please check the type/dimensions/specifications of the part LHISK12G in the Linear Ball Bushings - With pilot flange, single compact, reamed mounting holes. series.

Products like this...

Part Number
LHICK10L
LHICK12
LHICK12G
LHISK12H
LHISK12L
LHISK16
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSFor Shaft Size
(mm)
Overall Length L
(mm)
Lubrication Type O.D. D
(mm)
Basic Dynamic Load Rating (Details)
(N)
Basic Static Load Rating
(N)
Flange Shape Greased filled
1 Piece(s)Available

12 Days or more

101029[Grease coating] L Type (Heat Resistant)17368433Compact FlangedType L (Heat Resistance)
1 Piece(s)Available

8 Days or more

101230Standard19381449Compact FlangedStandard (Rust Prevent Oil)
1 Piece(s)Available

12 Days or more

101230[Grease coating] G Type (Low Dust Generation)19381449Compact FlangedType G (Low Particlate)
1 Piece(s)Available

12 Days or more

101230[Grease coating] H Type (For Food/Beverages)19381449Square FlangedType H (For Food and Beverages)
1 Piece(s)Available

12 Days or more

101230[Grease coating] L Type (Heat Resistant)19381449Square FlangedType L (Heat Resistance)
1 Piece(s)Available

8 Days or more

101637Standard26608716Square FlangedStandard (Rust Prevent Oil)

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.