(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Oldham type flexible couplings, stainless steel, with carbon reinforced resin spacer. A choice of keyway at one or both ends is available.
Part Number
Configured Part Number is shown.
Standard Bore | Keywayed Bore | [ M ]Material | [ A ]Accessories | |||
d1 (One Side) | d2 (One Side) | d1, d2 (Both Sides) | Hub | Spacer | ||
MCO | MCOLK | MCORK | MCOWK | 304 Stainless Steel (Sintered) | Carbon Reinforced Resin | Set Screw |
Part Number | - | Shaft Bore Dia. d1 | - | Shaft Bore Dia. d2 |
MCO20 | - | 6 | - | 6 |
MCOLK20 | - | 8 | - | 12 |
MCOWK20 | - | 10 | - | 12 |
Part Number | d1, d2 (d1≤d2) [ ! ]Keywayed Bore Type is selectable for diameter 6 or larger | D | D1 | d3 | L | ℓ | F | Set Screw | ||||||||||||||||||||
Type | No. | M | Tightening Torque (N·m) | |||||||||||||||||||||||||
MCO MCOLK MCORK MCOWK | 6 | 1 | 1.5 | 2 | 6 | 6.2 | 2.4 | 8.4 | 3 | 1.5 | M1.6 | 0.15 | ||||||||||||||||
8 | 1 | 2 | 3 | 8 | 8.2 | 3.4 | 9.6 | 3.5 | 1.7 | |||||||||||||||||||
10 | 2 | 3 | 4 | 10 | 10.2 | 4.4 | 10.2 | 3.7 | 1.8 | M2 | 0.3 | |||||||||||||||||
12 | 3 | 4 | 5 | 12 | 12.5 | 4.0 | 14.2 | 5.2 | 2.5 | M3 | 0.7 | |||||||||||||||||
15 | 4 | 5 | 6 | 6.35 | 7 | 8 | 14.5 | 15 | 5.0 | 16 | 5.4 | 2.6 | ||||||||||||||||
17 | 5 | 6 | 6.35 | 7 | 8 | 16.8 | 17.5 | 7.2 | 19.8 | 6.7 | 3.2 | M4 | 1.7 | |||||||||||||||
20 | 6 | 6.35 | 7 | 8 | 9.53 | 10 | 11 | 12 | 20 | 21 | 8.2 | 21.4 | 7 | 3.4 | ||||||||||||||
26 | 6 | 6.35 | 7 | 8 | 9.53 | 10 | 11 | 12 | 14 | 26 | 27 | 12.0 | 25.6 | 9 | 4 | |||||||||||||
30 | 8 | 10 | 12 | 14 | 30 | 31 | 13.0 | 33 | 12 | 6 | ||||||||||||||||||
34 | 10 | 11 | 12 | 14 | 15 | 16 | 34 | 35 | 13.0 | 34 | 13 | 5.5 | M5 | 4.0 | ||||||||||||||
38 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 38 | 41 | 16.0 | 40 | 15 | 7 |
Part Number | Allowable Torque (N·m) | Angular Misalignment (°) | Lateral Misalignment (mm) | Static Torsional Spring Constant (N·m/rad) | Max. Rotational Speed (r/min) | Moment of Inertia (kg·m2) | Allowable Axial Misalignment (mm) | Mass (g) | |
Type | No. | ||||||||
MCO MCOLK MCORK MCOWK | 6 | 0.3 | 3 | 0.3 | 9 | 12000 | 1.5x10-8 | ±0.25 | 1.5 |
8 | 0.5 | 0.4 | 13 | 2.2x10-8 | ±0.3 | 2.5 | |||
10 | 0.8 | 0.4 | 21 | 3.6x10-8 | ±0.32 | 4 | |||
12 | 1 | 0.5 | 44 | 1.6x10-7 | ±0.35 | 8 | |||
15 | 1.6 | 0.8 | 90 | 10000 | 3.5x10-7 | ±0.45 | 11 | ||
17 | 2.2 | 1 | 250 | 7.8x10-7 | ±0.55 | 18 | |||
20 | 3.2 | 1.5 | 340 | 8000 | 1.7x10-6 | ±0.6 | 29 | ||
26 | 6 | 2 | 420 | 6500 | 6.2x10-6 | 65 | |||
30 | 15 | 2 | 1200 | 6200 | 2x10-5 | 100 | |||
34 | 16 | 2.5 | 2400 | 6000 | 2.5x10-5 | 155 | |||
38 | 28 | 2.5 | 3500 | 5800 | 8x10-5 | 240 |
Quantity | 1~9 | 10~14 | 15~19 | 20~29 |
Discount Rate | Unit Price | 5% | 10% | 18% |
Shaft Bore Dia. d1, d2 | b | t | Key Nom. Dim. b x h | ||
---|---|---|---|---|---|
Dim. | Tolerance | Dim. | Tolerance | ||
6-7.9 | 2 | ±0.0125 | 1.0 | +0.1 0 | 2x2 |
8-10 | 3 | 1.4 | 3x3 | ||
10.1-12 | 4 | ±0.0150 | 1.8 | 4x4 | |
12.1-17 | 5 | 2.3 | 5x5 | ||
17.1-20 | 6 | 2.8 | 6x6 |
Coupling Type | Disk Tye | With Slit Type | Oldham Type | Jaw Type | Bellows Type | Rigid Type | Universal Joints Type | Chain Couplings Type |
---|---|---|---|---|---|---|---|---|
Photo | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
Shaft Bore Dia | Ø2-60 mm | Ø1.5-35 mm | Ø1-47 mm | Ø3-60 mm | Ø0-62 mm | Ø3-35 mm | Ø1-60 mm | Ø14-55 mm |
Mortor Recommendation | *Servo Motor *Stepping Motors | *Servo Motor *Stepping Motors | *General Purpose Morter | *Stepping Motors *General Purpose Morter | *Stepping Motors | *Servo Motor *Stepping Motors | *Stepping Motors *General Purpose Morter | *General Purpose Morter |
Torque | 0.15-800 N·m | 0.05-35 N·m | 0.06-352 N·m | 0.31-1,350 N·m | 0.3-500 N·m | 0.3-206 N·m | 0.25-495 N·m | 100-2,372 N·m |
Zero Backlash | Excellent | Excellent | Inefficient | Inefficient | Good | Excellent | Inefficient | Inefficient |
Allowable Angular Misalignment | Good | Good | Excellent | Reasonable | Excellent | Inefficient | Excellent | Reasonable |
Allowable Lateral Misalignment | Reasonable | Reasonable | Excellent | Reasonable | Reasonable | Inefficient | Inefficient | Reasonable |
Axial Misalignment | Good | Reasonable | Good | Inefficient | Excellent | Inefficient | Inefficient | Inefficient |
See all options | Click here | Click here | Click here | Click here | Click here | Click here | Click here | Click here |
For more details on each type of coupling click here
Easy to install with large angular/lateral misalignment allowances characteristics.
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
MCO15-[4,5,6,6.35,7,8]-[4,5,6,6.35,7,8] |
MCO15-[4,5,6,6.35,7,8]-RDC[4.1-7.9/0.1] |
MCO15-LDC[4.1-7.9/0.1]-[4,5,6,6.35,7,8] |
MCO15-LDC[4.1-7.9/0.1]-RDC[4.1-7.9/0.1] |
MCO17-[5,6,6.35,7,8]-[5,6,6.35,7,8] |
MCO17-[5,6,6.35,7,8]-RDC[5.1-7.9/0.1] |
MCO17-LDC[5.1-7.9/0.1]-[5,6,6.35,7,8] |
MCO17-LDC[5.1-7.9/0.1]-RDC[5.1-7.9/0.1] |
MCOLK15-[6,6.35,7,8]-[6,6.35,7,8] |
MCOLK15-[6,6.35,7,8]-RDC[6.1-7.9/0.1] |
MCOLK15-LDC[6.1-7.9/0.1]-[6,6.35,7,8] |
MCOLK15-LDC[6.1-7.9/0.1]-RDC[6.1-7.9/0.1] |
MCOLK17-[6,6.35,7,8]-[6,6.35,7,8] |
MCOLK17-[6,6.35,7,8]-RDC[6.1-7.9/0.1] |
MCOLK17-LDC[6.1-7.9/0.1]-[6,6.35,7,8] |
MCOLK17-LDC[6.1-7.9/0.1]-RDC[6.1-7.9/0.1] |
MCORK15-[4,5,6,6.35,7,8]-[6,6.35,7,8] |
MCORK15-[4,5,6,6.35,7,8]-RDC[6.1-7.9/0.1] |
MCORK15-LDC[4.1-7.9/0.1]-[6,6.35,7,8] |
MCORK15-LDC[4.1-7.9/0.1]-RDC[6.1-7.9/0.1] |
MCORK17-[5,6,6.35,7,8]-[6,6.35,7,8] |
MCORK17-[5,6,6.35,7,8]-RDC[6.1-7.9/0.1] |
MCORK17-LDC[5.1-7.9/0.1]-[6,6.35,7,8] |
MCORK17-LDC[5.1-7.9/0.1]-RDC[6.1-7.9/0.1] |
MCOWK15-[6,6.35,7,8]-[6,6.35,7,8] |
MCOWK15-[6,6.35,7,8]-RDC[6.1-7.9/0.1] |
MCOWK15-LDC[6.1-7.9/0.1]-[6,6.35,7,8] |
MCOWK15-LDC[6.1-7.9/0.1]-RDC[6.1-7.9/0.1] |
MCOWK17-[6,6.35,7,8]-[6,6.35,7,8] |
MCOWK17-[6,6.35,7,8]-RDC[6.1-7.9/0.1] |
MCOWK17-LDC[6.1-7.9/0.1]-[6,6.35,7,8] |
MCOWK17-LDC[6.1-7.9/0.1]-RDC[6.1-7.9/0.1] |
Loading...
Series Name | Oldham Type | Allowable Misalignment | Angular / Eccentricity / Axial | Application | Standard |
---|---|---|---|---|---|
Features | High Torque Type / Low Moment of Inertia | Body Material | 304 Stainless Steel Sintered Alloy | Category | Coupling Main Body |
Allowable Angular Misalignment(deg) | 3 | Buffer Part Material | Carbon Reinforced Resin | Operating Temperature(℃) | -40::90 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy