(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 6/15/2024 to 8:00 a.m. (CDT) 6/16/2024. We apologize for the inconvenience.
Bevel Gears - Pressure Angle 20 Degrees, Straight, Spiral, Module 1.0, 1.5, 2.0
Click this image to zoom it.
Move the mouse over the image to zoom
- Spec Change
Gears capable of transmitting force at a right angle
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ ! ]Set Screw is not included in Un-tapped Type products.
| Type | [ M ]Material | [ S ]Surface Treatment | [ A ]Accessories | ||||
| Straight Type | Spiral Type | ||||||
| Straight Bore | Straight Bore+Tap | Keyway+Tap | Straight Bore+Tap | Keyway+Tap | |||
| KGEASH | KGEAST | KGEASK | KGEAPT | KGEAPK | 1045 Carbon Steel | - | Set Screw (4137 Alloy Steel Black Oxide) |
| KGEASHB | KGEASTB | KGEASKB | KGEAPTB | KGEAPKB | Black Oxide | ||
| KGEASHG | KGEASTG | KGEASKG | KGEAPTG | KGEAPKG | Electroless Nickel Plating | ||
| KGHS | KGTS | KGKS | - | - | 304 Stainless Steel | - | Set Screw(304 Stainless Steel) |
Specifications
| Part Number | - | Number (of teeth / mating gear) | - | Shaft Bore Dia. PH7 | - | Twisting Direction |
| KGEASH1.0 KGEAPTG1.5 | - - | 2020 3618 | - - | 6 10 | - | R |
■Straight Type
[ ! ]Sizes marked with *are only applicable to 1045 Carbon Steel. [ ! ]Sizes in ( ) are for Stainless Steel 304. [ ! ]Module 1.0 is not available for KGHS (Round Shaft Bore of 304 Stainless Steel).
[ ! ]Spiral bevel gears from different manufacturers may not match correctly. Always select mating sets from MISUMI. [ ! ]Note.) The gears are sold in each piece qty, not as sets.
[ ! ]Select 10K as P dimension if you request keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10. >> Click here
■Spiral Type (Spiral Angle 35°)
[ ! ]Use Spiral Type in L and R sets.
[ ! ]Spiral bevel gears from different manufacturers may not match correctly. Always select mating sets from MISUMI. [ ! ]Note.) The gears are sold in each piece qty, not as sets.
[ ! ]Select 10K as P dimension if you request keyway width of 4.0mm (height 1.8mm) for Keyway+Tap with shaft bore diameter of 10. >> Click here
| Part Number | Nominal | Shaft Bore Dia. PH7 (1mm Increment) | Number of Teeth | R (Gear Ratio) | Mating Gear Number | B | H | d | D | S | E | L | G | ℓ1 | ℓ2 | L1 | A° | M (Coarse) | ||
| Type | Module | Straight Bore Straight Bore+Tap | Keyway+Tap | |||||||||||||||||
| Straight Bore KGEASH KGEASHB KGEASHG KGHS Straight Bore+Tap KGEAST KGEASTB KGEASTG KGTS Keyway+Tap KGEASK KGEASKB KGEASKG KGKS | 1.0 | 2020 | 6, 8 | 8 | 20 | 1:1 | 2020 | 4.3 | 16 | 20 | 21.41 | 11.8 | 21 | 14.53 | 11.71 | 9 | 4.5 | 13 | 49°3' | M4 |
| 2525 | 6, 8, 10 | 8, 10 | 25 | 2525 | 5.3 | 20 | 25 | 26.41 | 15 | 23 | 14.7 | 11.21 | 8 | 4 | 13 | 48°51' | M4 | |||
| 3030 | 8, 10, 12 | 8, 10, 12 | 30 | 3030 | 6.2 | 22 | 30 | 31.41 | 19.4 | 26 | 15.89 | 11.71 | 8.9 | 4.5 | 14.5 | 47°42' | M4(M5) | |||
| 2040 | 6, 8 | 8 | 20 | 1:2 | 4020 | 5.7 | 16 | 20 | 21.79 | 12.1 | 29.6 | 15.03 | 10.05 | 8.6 | 4 | 14 | 29°8' | M4 | ||
| 4020 | 8, 10, 12 | 8, 10, 12 | 40 | 2040 | 5.7 | 25 | 40 | 40.89 | 28.4 | 21.8 | 15.02 | 12.69 | 8 | 4 | 13 | 66°0' | M4(M5) | |||
| 1.5 | 2020 | 10, 12 | 10, 12 | 20 | 1:1 | 2020 | 6.8 | 24 | 30 | 32.12 | 17.7 | 28 | 18.53 | 14.06 | 10 | 5 | 16.5 | 49°3' | M4 | |
| 2525 | 10~14 | 10~14 | 25 | 2525 | 7.5 | 30 | 37.5 | 39.62 | 23.7 | 34 | 21.26 | 16.31 | 11.5 | 5 | 19 | 48°51' | M4 | |||
| 3030 | 12~16 | 12~16 | 30 | 3030 | 9.3 | 33 | 45 | 47.12 | 29.6 | 38 | 22.83 | 16.56 | 12.34 | 6 | 21 | 47°42' | M5 | |||
| 1836 | 8, 10, 12 | 8 | 18 | 1:2 | 3618 | 9.8 | 22 | 27 | 29.68 | 12.2(12.1) | 40.74 | 22.96 | 14.41 | 12.5 | 6 | 21 | 29°25' | M4 | ||
| 3618 | 10~15 | 10~15 | 36 | 1836 | 9.8 | 30 | 54 | 55.34 | 34.3 | 26.75 | 18.54 | 14.59 | 10 | 5 | 15.5 | 66°17' | M5 | |||
| 2.0 | 2020 | 12~14 | 12~14 | 20 | 1:1 | 2020 | 8.5 | 34 | 40 | 41.32 | 23.9 | 37 | 24 | 18.41 | 14 | 7 | 21 | 49°3' | M5 | |
| *2525 | 25 | 2525 | 10.5 | 42 | 50 | 51.33 | 32.3 | 40 | 23.34 | 16.41 | 10.99 | 5 | 21 | 48°51' | M5 | |||||
| 3030 | 16~18 | 16~18 | 30 | 3030 | 12.4 | 44 | 60 | 61.36 | 38.9 | 51 | 30.77 | 22.41 | 16.79 | 8 | 28 | 47°42' | M6 | |||
| 1836 | 10 | 10 | 18 | 1:2 | 3618 | 12.6 | 28 | 36 | 37.81 | 19.1 | 53.12 | 29 | 18.01 | 15.12 | 7 | 27 | 29°25' | M4 | ||
| 3618 | 12~14 | 12~14 | 36 | 1836 | 12.6 | 36 | 72 | 72.15 | 47.6 | 35.21 | 24.07 | 19 | 13 | 6.5 | 21 | 66°17' | M5 | |||
[ ! ]Spiral bevel gears from different manufacturers may not match correctly. Always select mating sets from MISUMI. [ ! ]Note.) The gears are sold in each piece qty, not as sets.
[ ! ]Select 10K as P dimension if you request keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10. >> Click here
■Spiral Type (Spiral Angle 35°)
| Part Number | Nominal | Shaft Bore Dia. PH7 (1mm Increment) | Twisting Direction | Number of Teeth | R (Gear Ratio) | Mating Gear Number | B | H | d | D | S | E | L | G | ℓ1 | ℓ2 | L1 | A° | M (Coarse) | ||
| Type | Module | Straight Bore+Tap | Keyway+Tap | ||||||||||||||||||
| Straight Bore+Tap KGEAPT KGEAPTB KGEAPTG Keyway+Tap KGEAPK KGEAPKB KGEAPKG | 1.0 | 2020 | 6, 8 | 8 | L R | 20 | 1:1 | 2020 | 4.5 | 16 | 20 | 21.12 | 11.3 | 21 | 14.43 | 11.56 | 9 | 4.5 | 13 | 50°31' | M4 |
| 3030 | 10, 12 | 10, 12 | (Left) (Right) | 30 | 3030 | 6.2 | 22 | 30 | 31.09 | 19.4 | 26 | 15.67 | 11.54 | 9 | 4.5 | 14.5 | 48°21' | M5 | |||
| 2040 | 8, 10, 12 | 8 | L (Left) | 20 | 1:2 | 4020 | 5.7 | 16 | 20 | 21.87 | 12.1 | 29.6 | 15 | 10.07 | 8.6 | 4 | 14 | 30°13' | M4 | ||
| 4020 | 10, 12 | 10, 12 | R (Right) | 40 | 2040 | 5.7 | 25 | 40 | 40.41 | 28.4 | 21.8 | 14.57 | 12.21 | 8 | 4 | 13 | 65°36' | M5 | |||
| 1.5 | 2020 | 10, 12 | 10, 12 | L R | 20 | 1:1 | 2020 | 7 | 24 | 30 | 31.85 | 17.2 | 28 | 18.44 | 13.93 | 10 | 5 | 16.5 | 50°5' | M4 | |
| 3030 | 12~16 | 12~16 | (Left) (Right) | 30 | 3030 | 9.3 | 33 | 45 | 46.79 | 29.7 | 38 | 22.64 | 16.4 | 12 | 6 | 21 | 47°54' | M5 | |||
| 1836 | 8, 10, 12 | 8 | L (Left) | 18 | 1:2 | 3618 | 9.8 | 22 | 27 | 30.09 | 12.2 | 40.74 | 22.96 | 14.51 | 12.49 | 6 | 21 | 30°44' | M4 | ||
| 3618 | 10~15 | 10~15 | R (Right) | 36 | 1836 | 9.8 | 30 | 54 | 54.76 | 34.3 | 26.75 | 18.01 | 14.01 | 9 | 4.5 | 15.5 | 65°57' | M5 | |||
[ ! ]Spiral bevel gears from different manufacturers may not match correctly. Always select mating sets from MISUMI. [ ! ]Note.) The gears are sold in each piece qty, not as sets.
[ ! ]Select 10K as P dimension if you request keyway width of 4.0mm (height 1.8mm) for Keyway+Tap with shaft bore diameter of 10. >> Click here
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| KGEAPK1.0-2020-8-[L,R] |
| KGEAPK1.0-2040-8-L |
| KGEAPK1.0-3030-10K-[L,R] |
| KGEAPK1.0-3030-[10,12]-[L,R] |
| KGEAPK1.0-4020-10K-R |
| KGEAPK1.0-4020-[10,12]-R |
| KGEAPK1.5-1836-8-L |
| KGEAPK1.5-2020-10K-[L,R] |
| KGEAPK1.5-2020-[10,12]-[L,R] |
| KGEAPK1.5-3030-[12,13,14,15,16]-[L,R] |
| KGEAPK1.5-3618-10K-R |
| KGEAPK1.5-3618-[10-15/1]-R |
| KGEAPKB1.0-2020-8-[L,R] |
| KGEAPKB1.0-2040-8-L |
| KGEAPKB1.0-3030-10K-[L,R] |
| KGEAPKB1.0-3030-[10,12]-[L,R] |
| KGEAPKB1.0-4020-10K-R |
| KGEAPKB1.0-4020-[10,12]-R |
| KGEAPKB1.5-1836-8-L |
| KGEAPKB1.5-2020-10K-[L,R] |
| KGEAPKB1.5-2020-[10,12]-[L,R] |
| KGEAPKB1.5-3030-[12,13,14,15,16]-[L,R] |
| KGEAPKB1.5-3618-10K-R |
| KGEAPKB1.5-3618-[10-15/1]-R |
| KGEAPKG1.0-2020-8-[L,R] |
| KGEAPKG1.0-2040-8-L |
| KGEAPKG1.0-3030-10K-[L,R] |
| KGEAPKG1.0-3030-[10,12]-[L,R] |
| KGEAPKG1.0-4020-10K-R |
| KGEAPKG1.0-4020-[10,12]-R |
| KGEAPKG1.5-1836-8-L |
| KGEAPKG1.5-2020-10K-[L,R] |
| KGEAPKG1.5-2020-[10,12]-[L,R] |
| KGEAPKG1.5-3030-[12,13,14,15,16]-[L,R] |
| KGEAPKG1.5-3618-10K-R |
| KGEAPKG1.5-3618-11-R |
| KGEAPKG1.5-3618-[10,12,13,14,15]-R |
| KGEAPT1.0-2020-[6,8]-[L,R] |
| KGEAPT1.0-2040-[8,10,12]-L |
| KGEAPT1.0-3030-[10,12]-[L,R] |
| KGEAPT1.0-4020-[10,12]-R |
| KGEAPT1.5-1836-[8,10,12]-L |
| KGEAPT1.5-2020-[10,12]-[L,R] |
| KGEAPT1.5-3030-[12,13,14,15,16]-[L,R] |
| KGEAPT1.5-3618-[10-15/1]-R |
| KGEAPTB1.0-2020-[6,8]-[L,R] |
| KGEAPTB1.0-2040-[8,10,12]-L |
| KGEAPTB1.0-3030-[10,12]-[L,R] |
| KGEAPTB1.0-4020-[10,12]-R |
| KGEAPTB1.5-1836-[8,10,12]-L |
| KGEAPTB1.5-2020-[10,12]-[L,R] |
| KGEAPTB1.5-3030-[12,13,14,15,16]-[L,R] |
| KGEAPTB1.5-3618-[10-15/1]-R |
| KGEAPTG1.0-2020-[6,8]-[L,R] |
| KGEAPTG1.0-2040-[8,10,12]-L |
| KGEAPTG1.0-3030-[10,12]-[L,R] |
| KGEAPTG1.0-4020-[10,12]-R |
| KGEAPTG1.5-1836-[8,10,12]-L |
| KGEAPTG1.5-2020-[10,12]-[L,R] |
| KGEAPTG1.5-3030-[12,13,14,15,16]-[L,R] |
Loading...
Basic Information
| Heat Treatment | Not Provided | Ground Tooth | Not Provided | Precision(* New JIS) | Grade 4 |
|---|---|---|---|---|---|
| Shaft Bore Tolerance | H7 |
Specification/Dimensions
-
Module
-
Shape
- Straight Type
- Spiral Type
- Miter Gears|Spiral Miter Gears
-
Number of Teeth(Teeth)
-
Reduction Ratio
-
Material
- Steel
- Stainless Steel
-
Tooth Width B(mm)
-
Surface Treatment
- Not Provided
- Black Oxide Coating
- Electroless Nickel Plating
-
Shaft Bore Dia. P(Ø)
-
Shaft Hole Specifications
- Keyway + Tap
- Round Hole
- Round Hole + Tap
-
Nominal
- 1836
- 2020
- 2040
- 2525
- 3030
- 3618
- 4020
-
Twisting Direction
- Left [L]
- Right [R]
-
type
- KGEAPK
- KGEAPKB
- KGEAPKG
- KGEAPT
- KGEAPTB
- KGEAPTG
- KGEASH
- KGEASHB
- KGEASHG
- KGEASK
- KGEASKB
- KGEASKG
- KGEAST
- KGEASTB
- KGEASTG
- KGHS
- KGKS
- KGTS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Miter Gear
- Miter Gear PBS
- Ground Spiral Miter MMSG
- Ground Tooth Spiral Miter SMSG
- Finished miter
- Stainless steel miter
- Plastic miter
- Bevel Gear
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy