(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 4/20/2024 to 5:00 p.m. (CDT) 4/21/2024. We apologize for the inconvenience.
Spur Gears - Pressure Angle 20Deg., Module 1.0 (Part Numbers)
- Lead Time Reduction
New: Width 8 mm for thin type and 12 mm for standard type are added. [July 2023]
•Material : 1045 Carbon Steel or Equivalent, 304 Stainless Steel, Stainless Steel, Steel
•Shape : Shape A, Shape B, Shape K
For complete product overview and details on Spur Gears - Pressure Angle 20Deg., Module 1.0 see the sections below:
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ ! ]Set Screw is not included in Un-tapped Type products.
[ ! ]Selectable Gear Shapes differ depending on the number of teeth. Check the spec. table.
| Type | [ M ] Material | [ S ]Surface Treatment | [ A ]Accessories | ||
| Straight Bore | Straight Bore+Tap | Keyway / Keyway+Tap | |||
| GEAHB | GEAB | GEAKB | 1045 Carbon Steel | - | Set Screw (4137 Alloy Steel Black Oxide) |
| GEAHBB | GEABB | GEAKBB | Black Oxide | ||
| GEAHBG | GEABG | GEAKBG | Electroless Nickel Plating | ||
| GEAHS | GEAS | GEAKS | 304 Stainless Steel | - | Set Screw (304 Stainless Steel) |
[ ! ]Selectable Gear Shapes differ depending on the number of teeth. Check the spec. table.
Specifications
| Part Number | - | Number of Teeth | - | B | - | Gear Shape | - | P |
| GEAB1.0 GEAKB1.0 GEAS1.0 | - - - | 25 38 18 | - - - | 12 10 6 | - - - | B A K | - - - | 8 10N 10 |
For alterations on tooth width and hub dimensions >> Click here
■Standard Type
[ NG ]*marked number of teeth is not available for stainless steel type (GEAHS, GEAS and GEAKS).
[ NG ]Shaft bore diameter 9N is not available for Keyway Bore + Tap.
[ ! ]Select 10K as P dimension if you request keyway width of 4.0mm (height 1.8mm) for Keyway+Tap with shaft bore diameter of 10. >> Click here
[ ! ]Shaft bore diameter 6.35 is available for Straight Bore and Straight Bore+Tap.
*1 Allowable Transmission Forces in the table are reference values calculated with prescribed conditions. For conditions For Conditions, refer to >> Click here. Tooth width is calculated as 10mm.
■Standard Type
[ NG ]*marked number of teeth is not available for stainless steel type (GEAHS, GEAS and GEAKS).
[ NG ]Shaft bore diameter 9N is not available for Keyway Bore + Tap.
[ ! ]Select 10K as P dimension if you request keyway width of 4.0mm (height 1.8mm) for Keyway+Tap with shaft bore diameter of 10. >> Click here
[ ! ]Shaft bore diameter 6.35 is available for Straight Bore and Straight Bore+Tap.
*1 Allowable Transmission Forces in the table are reference values calculated with prescribed conditions. For conditions For Conditions, refer to >> Click here. Tooth width is calculated as 10mm.
■Thin Type
[ NG ]*marked number of teeth is not available for stainless steel type (GEAHS, GEAS and GEAKS). [ NG ]Shaft bore diameter 9N is not available for Keyway Bore + Tap.
[ ! ]Select 10K as P dimension if you request keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10. >> Click here [ ! ]Shaft bore diameter 6.35 is available for Straight Bore and Straight Bore + Tap.
*1. Allowable Transmission Forces in the table are reference values calculated with prescribed conditions. For conditions, refer to >> Click here.
Tooth width is calculated as 6mm.
[ NG ]*marked number of teeth is not available for stainless steel type (GEAHS, GEAS and GEAKS). [ NG ]Shaft bore diameter 9N is not available for Keyway Bore + Tap.
[ ! ]Select 10K as P dimension if you request keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10. >> Click here [ ! ]Shaft bore diameter 6.35 is available for Straight Bore and Straight Bore + Tap.
*1. Allowable Transmission Forces in the table are reference values calculated with prescribed conditions. For conditions, refer to >> Click here.
Tooth width is calculated as 6mm.
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| GEAB1.0-12-10-K-6.35 |
| GEAB1.0-12-10-K-[6-8/1] |
| GEAB1.0-12-12-[6,6.35,7,8,9] |
| GEAB1.0-12-12-K-6.35 |
| GEAB1.0-12-12-K-[6-8/1] |
| GEAB1.0-13-10-K-6.35 |
| GEAB1.0-13-10-K-[6-10/1] |
| GEAB1.0-13-12-K-6.35 |
| GEAB1.0-13-12-K-[6-10/1] |
| GEAB1.0-14-6-K-6.35 |
| GEAB1.0-14-6-K-[6-10/1] |
| GEAB1.0-14-8-[6,6.35,7,8,10,11] |
| GEAB1.0-14-8-K-6.35 |
| GEAB1.0-14-8-K-[6-10/1] |
| GEAB1.0-14-10-K-6.35 |
| GEAB1.0-14-10-K-[6-10/1] |
| GEAB1.0-14-12-[6,6.35,7,8,9,10] |
| GEAB1.0-14-12-K-6.35 |
| GEAB1.0-14-12-K-[6-10/1] |
| GEAB1.0-15-6-K-6.35 |
| GEAB1.0-15-6-K-[6-10/1] |
| GEAB1.0-15-8-[6,6.35,7,8,10,11] |
| GEAB1.0-15-8-K-6.35 |
| GEAB1.0-15-8-K-[6-10/1] |
| GEAB1.0-15-10-K-6.35 |
| GEAB1.0-15-10-K-[6-10/1] |
| GEAB1.0-15-12-[6,6.35,7,8,10,11] |
| GEAB1.0-15-12-K-6.35 |
| GEAB1.0-15-12-K-[6-10/1] |
| GEAB1.0-16-6-K-6.35 |
| GEAB1.0-16-6-K-[6-12/1] |
| GEAB1.0-16-8-[6,6.35,7,8,10,12] |
| GEAB1.0-16-8-K-6.35 |
| GEAB1.0-16-8-K-[6-12/1] |
| GEAB1.0-16-10-K-6.35 |
| GEAB1.0-16-10-K-[6-12/1] |
| GEAB1.0-16-12-[6-12/1] |
| GEAB1.0-16-12-K-6.35 |
| GEAB1.0-16-12-K-[6-12/1] |
| GEAB1.0-17-6-K-6.35 |
| GEAB1.0-17-6-K-[6-12/1] |
| GEAB1.0-17-8-K-6.35 |
| GEAB1.0-17-8-K-[6-12/1] |
| GEAB1.0-17-10-K-6.35 |
| GEAB1.0-17-10-K-[6-12/1] |
| GEAB1.0-17-12-K-6.35 |
| GEAB1.0-17-12-K-[6-12/1] |
| GEAB1.0-18-6-K-6.35 |
| GEAB1.0-18-6-K-[6-12/1] |
| GEAB1.0-18-8-[6-12/1] |
| GEAB1.0-18-8-K-6.35 |
| GEAB1.0-18-8-K-[6-12/1] |
| GEAB1.0-18-10-K-6.35 |
| GEAB1.0-18-10-K-[6-12/1] |
| GEAB1.0-18-12-[6-12/1] |
| GEAB1.0-18-12-K-6.35 |
| GEAB1.0-18-12-K-[6-12/1] |
| GEAB1.0-19-6-B-6.35 |
| GEAB1.0-19-6-B-[6-10/1] |
| GEAB1.0-19-8-[6,6.35,7,8,9,10] |
| GEAB1.0-19-8-B-6.35 |
| GEAB1.0-19-8-B-[6-10/1] |
| GEAB1.0-19-10-B-6.35 |
| GEAB1.0-19-10-B-[6-10/1] |
| GEAB1.0-19-12-B-6.35 |
| GEAB1.0-19-12-B-[6-10/1] |
| GEAB1.0-20-6-B-6.35 |
| GEAB1.0-20-6-B-[6-10/1] |
| GEAB1.0-20-8-[6,6.35,7,8,10,11] |
| GEAB1.0-20-8-B-6.35 |
| GEAB1.0-20-8-B-[6-10/1] |
| GEAB1.0-20-10-B-6.35 |
| GEAB1.0-20-10-B-[6-10/1] |
| GEAB1.0-20-12-[6,6.35,7,8,9,10] |
| GEAB1.0-20-12-B-6.35 |
| GEAB1.0-20-12-B-[6-10/1] |
| GEAB1.0-21-6-B-6.35 |
| GEAB1.0-21-6-B-[6-12/1] |
| GEAB1.0-21-8-[6,6.35,7,8,10,12] |
| GEAB1.0-21-8-B-6.35 |
| GEAB1.0-21-8-B-[6-12/1] |
| GEAB1.0-21-10-B-6.35 |
| GEAB1.0-21-10-B-[6-12/1] |
| GEAB1.0-21-12-B-6.35 |
| GEAB1.0-21-12-B-[6-12/1] |
| GEAB1.0-22-6-B-6.35 |
| GEAB1.0-22-6-B-[6-12/1] |
| GEAB1.0-22-8-[6,6.35,7,8,10,12] |
| GEAB1.0-22-8-B-6.35 |
| GEAB1.0-22-8-B-[6-12/1] |
Loading...
Example
Basic Information
| Heat Treatment | Not Provided | Ground Tooth | Not Provided | Backlash | Provided |
|---|---|---|---|---|---|
| Bearing | Not Provided | Shaft Bore Tolerance | H7 | Precision(Old JIS) | JIS B 1702 (Class 4) |
Specification/Dimensions
-
Number of Teeth
-
Material
- Steel
- Stainless Steel
- Steel
-
Shape
-
Shape A -
Shape B -
Shape K
-
-
Surface Treatment
- Not Provided
- Black Oxide Coating
- Electroless Nickel Plating
-
Shaft Bore Dia.(Ø)
- 6
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
[6-58/1Ø Unit(s)]
-
Tooth Width B(mm)
-
Hole Shape
- Keyway Hole
- Keyway Hole + Tap
- Round Hole
- Round Hole + Tap
-
type
- GEAB1.0
- GEABB1.0
- GEABG1.0
- GEAHB1.0
- GEAHBB1.0
- GEAHBG1.0
- GEAHS1.0
- GEAKB1.0
- GEAKBB1.0
- GEAKBG1.0
- GEAKS1.0
- GEAS1.0
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Spur Gears - Pressure Angle 20Deg., Module 0.5
- Spur Gears - Pressure Angle 20Deg., Module 2.0
- Spur Gears - Pressure Angle 20 Degrees, Induction Hardened
- Spur Gears - Pressure Angle 20 Degrees, B Shape, Shaft Bore Fixed
- K Standard Pinion Gear (Module 2) Full-Depth Tooth, Pressure Angle 20°
- Spur Gear m2 S45C Type
- Spur Gear SSA
- Stainless Steel Spur Gear SUSA
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy