・Materials
· Quartz Far Infrared Heaters
Material:
Quartz Tube: Quartz Glass
Heater Cap : Brass + Nickel Plating
Terminal : 303 Stainless Steel Equivalent
· Reflection Mirror
Material:
Reflection Mirror : 1050 Aluminum Alloy
Side Plate : 1050 Aluminum Alloy
Holder Mounting Metal Fitting: 1018 Carbon Steel +
Ni Chrome Plating
Specifications
Part Number | - | L | - | V |
MPHHS | - | 150 | - | V100 |
|
|
MPHHS (Set)
MPHH (Quartz Far Infrared Heater only)
| 150~240 | 100 | 250 |
250~340 | 100 | 400 |
200 | 500 |
350~440 | 100 | 500 |
200 | 500 |
450~540 | 100 | 600 |
200 | 600 |
550~600 | 100 | 1000 |
200 | 800 |
More Information
· The customer should assemble the MPHHS (set), which is a set of quartz far infrared heater, reflection mirror and mounting holder.
How to Mount
①Fix the "mounting holder" to the "mounting metal" installed on the reflection mirror.
②Fix the reflection mirror and mounting holder to the designated place by using M5 screw for mounting holder or by drilling holes on reflection mirror body.
③Hold the "heater cap" of quartz far infrared heater by "mounting holder".
Do not hold it by "quartz tube" or "safety insulator".
Cautions on Installation
· After heating, tighten the nuts once more.
(By heat expansion, it may be loosened.)
· Additional tightening of the tightening bolt is recommended to only one side as Quarts Far Infrared Heater may be broken due to the different coefficient of heat expansion.
■Features
· The quartz far infrared heater has Nickel-chrome wires wrapped inside the quartz glass tube, which irradiate far infrared ray to the heated objects.
· Although its function is similar to that of far infrared ceramic heaters, compared with ceramic heater it has the following features: ① Rise/Drop in temperature are quick after the power is supplied ② Relatively broad heat distribution ③ Heat radiation direction is easily controlled.
· The far infrared ray uniformly heats the surface and interior of the object.
· The temperature adjustment can be done by adjusting the distance to the heated object.
· This is a clean heater with little dust scattering. The used quartz tube has excellent chemical resistance.
· By using the reflection mirror, the irradiation direction of far infrared ray can be controlled, and more effective heat radiation can be obtained.
■Cautions for Use
· These products are made of glass. Be extremely careful with handling since it is easy to break.
Turn off the power immediately if it breaks during operation.
· These products are for horizontal (lateral) use. Not usable in position of vertical (standing positioned) and slant (oblique positioned).
· This heater becomes very hot. It may result in burn injury if touched while light is on or immediately after lights-out.
· The cap part (insulators on both ends of quartz tube) should be used at a temperature lower than 100°C.
· Do not touch the glass tube by bare hand. Sodium from sweat decreases the mechanical strength of quarts tubes.
■Usage
· Desiccation of the Base and Material
· Baking Finish and Desiccation of the Coat
Because infrared ray heats the object directly through no air, it is more efficient.
Example
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy