(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Temperature Control Accessories - Universal Relays, Soldered Terminal
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
[Features]·This is a solder terminal type universal relay.
Part Number
Configured Part Number is shown.
Specifications
| Part Number |
| MURH 10 |
| Part Number | Rated Coil *1 | Contact Rating | ||||||||
| Rated Current (mA)±15% | Rated Voltage AC (V) | Coil Resistance (Ω) ±10% (at 20°C) | Number of Poles | Allowable Contact Current | Contact Rating Voltage (V) | Allowable Contact Power (Resistance Load) | Load Current with Resistive Load | |||
| Type | No. | 50Hz | 60Hz | |||||||
| MURH | 10 | 9.2~11.0 | 7.8~9.0 | 100~110 | 3,460 | 2 poles | 10A | AC250 DC30 | AC2500VA DC300W | 10A |
| 20 | 4.6~ 5.5 | 4.0~4.6 | 200~220 | 14,080 | AC250 DC30 | |||||
Note) The rated current value includes the current of operation indicator LED.
■Properties
*1. Measurement Condition: DC5V, 1A, depending on the voltage descent method.
*2. M measurement Condition: The value at ON/OFF frequency 120 times/min. Failure modulus P level (Reference)
*3. Measurement Condition: When rated voltage is applied (at 20°C), Bounce is excluded.
*4. When 100% of rated voltage is applied.
| Contact Material | Ag Alloy | Maximum ON/OFF Frequency | Electrical: 1,800 times/h, Mechanical: 18,000 times/h |
| Contact Resistance *1 | 50mΩ or Less | Vibration Resistance | Endurance: Frequency 10~55Hz, Half Wave 0.5mm Malfunction: Frequency 10~55Hz, Half Wave 0.5mm |
| Minimum Operation Load *2 | DC24V, 5mA (Reference Value) | Impact Resistance | Endurance: 1,000m/s2, Malfunction: 150m/s2 |
| Response Time *3 | 20ms or Less | Mechanical Durability | AC: 50 million times or more, DC: 100 million times or more. |
| Recovery Time *3 | 20ms or Less | Electrical Durability *3 | AC250V: Resistance Load 10A=100,000, 5A=500,000 times. |
| Power Consumption | 0.9-1.2VA(60Hz) 1.1-1.4VA(50Hz) | Operating Ambient Temp. *4 | -55~+60°C (No Freezing) |
| Insulation Resistance | 100MΩ or more DC500V mega | Operating Ambient Humidity | 5~85%RH (No Condensation) |
| Withstand Voltage | AC2500V, 1min (between the same pole contact circuit. AC1000V, 1min.) | Mass (approx.) | 35g |
*2. M measurement Condition: The value at ON/OFF frequency 120 times/min. Failure modulus P level (Reference)
*3. Measurement Condition: When rated voltage is applied (at 20°C), Bounce is excluded.
*4. When 100% of rated voltage is applied.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
■Cautions for Safety
· Shut off the power before attaching, detaching, wiring, maintaining and examining. There may be danger of fire or electrical shock.
· Comply with the rated specification range and the specification. There may be danger of fire or electrical shock.
· Use wires suitable for the applied voltage and current. Tighten the terminal screws using appropriate torque.
· Shut off the power before attaching, detaching, wiring, maintaining and examining. There may be danger of fire or electrical shock.
· Comply with the rated specification range and the specification. There may be danger of fire or electrical shock.
· Use wires suitable for the applied voltage and current. Tighten the terminal screws using appropriate torque.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Temperature Controller - Outer Dimensions, 48 x 48/96 x 96 mm
- Temperature Controllers - Universal Type
- Temperature Control Accessories - Terminal Blocks
- Temperature Controller - Outer Dimensions, 24 x 48 mm
- Temperature Controller (Digital Controller) [E5AC]
- Electronic Temperature Controller E5C2
- Digital Thermo E5LC
- USB-Infrared Conversion Cable
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy