(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Terminal Blocks - Pneumatic, Outlets 2 Sides, No Inlets, Configurable Horizontal Mounting Holes
- Lead Time Reduction
Large orders for 20~50 pcs. are available! G(PF) screws can be specified also.
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ S ]Surface Treatment | Max. Operating Pressure | ||||||
| Pitch (P) Standard | Pitch (P) Configurable | ||||||||
| 15 Square | 20 Square | 25 Square | 35 Square | 20 Square | 25 Square | 35 Square | |||
| - | BTANC | BTA | BTANL | BTANCP | BTAP | BTANLP | Aluminum Alloy | - | 1MPa≈10kgf/cm² or less |
| BTANSA | BTANCA | BTAA | BTANLA | BTANCAP | - | - | Clear Anodize | ||
Specifications
| Part Number | - | R | - | S | - | P | |||||
| Type | Mounting Hole Change | Circuits | |||||||||
| BTA BTAP G-BTAP | T ZT ZT | 3 4 4 | - - - | R1 R2 R2 | - - - | S2 S2 S2 | - - | P50 P50 | (G Thread) | ||
| Part Number | Rc (PT), NPT, M (Coarse) | Pitch P | Number of Pitches N | Total Number of R and S Threads | A | B | E | X | Y | Mounting Hole | ||||
| Type | Mounting Hole Change | Circuits | R, S | Standard | Configurable 1mm Increment | M | ||||||||
| 15 SQ. | T (Tapped) | 1 | M3 (M3) M4 (M4) 5 (M5) | - | - | 0 | 2 | 15 | 15 | 15 | 5 | 7.5 | M4 | |
| Pitch Standard BTANSA | 2 | 15 | - | 1 | 4 | |||||||||
| 3 | 2 | 6 | ||||||||||||
| 4 | 3 | 8 | ||||||||||||
| 5 | 4 | 10 | ||||||||||||
| 6 | 5 | 12 | ||||||||||||
| 7 | 6 | 14 | ||||||||||||
| 8 | 7 | 16 | ||||||||||||
| 20 SQ. | 1 | 1 (1/8) M3 (M3) M4 (M4) 5 (M5) | - | - | 0 | 2 | 20 | 20 | 20 | 5 | 10 | M5 | ||
| Pitch Standard BTANC BTANCA | Pitch Configurable BTANCP BTANCAP | 2 | 15 | 15~50 | 1 | 4 | ||||||||
| 3 | 2 | 6 | ||||||||||||
| 4 | 3 | 8 | ||||||||||||
| 5 | 4 | 10 | ||||||||||||
| 6 | 5 | 12 | ||||||||||||
| 7 | 6 | 14 | ||||||||||||
| 8 | 7 | 16 | ||||||||||||
| 25 SQ. | NA (Through) T (Tapped) ZT (Counterbore Tapped) | 1 | 1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4) | - | - | 0 | 2 | 25 | 25 | 20 | 7.5 | 12.5 | M5 | |
| Pitch Standard BTA BTAA | Pitch Configurable BTAP | 2 | 25 | 20~60 | 1 | 4 | ||||||||
| 3 | 2 | 6 | ||||||||||||
| 4 | 3 | 8 | ||||||||||||
| 5 | 4 | 10 | ||||||||||||
| 6 | 25~60 | 5 | 12 | |||||||||||
| 7 | 6 | 14 | ||||||||||||
| 8 | 7 | 16 | ||||||||||||
| 35 SQ. | 1 | 2 (1/4) 3 (3/8) 4 (1/2) | - | - | 0 | 2 | 35 | 35 | 25 | 7.5 | 17.5 | M6 | ||
| Pitch Standard BTANL BTANLA | Pitch Configurable BTANLP | 2 | 40 | 35~60 | 1 | 4 | ||||||||
| 3 | 2 | 6 | ||||||||||||
| 4 | 3 | 8 | ||||||||||||
| 5 | 4 | 10 | ||||||||||||
| 6 | 5 | 12 | ||||||||||||
| 7 | 6 | 14 | ||||||||||||
| 8 | 7 | 16 | ||||||||||||
[ ! ]For R and S, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ). [ ! ]Single Circuit is not available for Pitch Configurable Type. [ ! ]Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
[ ! ]Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint from the left, 2 and 3 port pitch, and 5 and 6 port pitch. (Except 15 and 20 Square)
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| BTA1-[R1N,R2N]-[S1N,S2N] |
| BTA1-[R1N,R2N]-S[1,2,5] |
| BTA1-R[1,2,5]-[S1N,S2N] |
| BTA1-R[1,2,5]-S[1,2,5] |
| BTA2-[R1N,R2N]-[S1N,S2N] |
| BTA2-[R1N,R2N]-S[1,2,5] |
| BTA2-R[1,2,5]-[S1N,S2N] |
| BTA2-R[1,2,5]-S[1,2,5] |
| BTA3-[R1N,R2N]-[S1N,S2N] |
| BTA3-[R1N,R2N]-S[1,2,5] |
| BTA3-R[1,2,5]-[S1N,S2N] |
| BTA3-R[1,2,5]-S[1,2,5] |
| BTA4-[R1N,R2N]-[S1N,S2N] |
| BTA4-[R1N,R2N]-S[1,2,5] |
| BTA4-R[1,2,5]-[S1N,S2N] |
| BTA4-R[1,2,5]-S[1,2,5] |
| BTA5-[R1N,R2N]-[S1N,S2N] |
| BTA5-[R1N,R2N]-S[1,2,5] |
| BTA5-R[1,2,5]-[S1N,S2N] |
| BTA5-R[1,2,5]-S[1,2,5] |
| BTA6-[R1N,R2N]-[S1N,S2N] |
| BTA6-[R1N,R2N]-S[1,2,5] |
| BTA6-R[1,2,5]-[S1N,S2N] |
| BTA6-R[1,2,5]-S[1,2,5] |
| BTA7-[R1N,R2N]-[S1N,S2N] |
| BTA7-[R1N,R2N]-S[1,2,5] |
| BTA7-R[1,2,5]-[S1N,S2N] |
| BTA7-R[1,2,5]-S[1,2,5] |
| BTA8-[R1N,R2N]-[S1N,S2N] |
| BTA8-[R1N,R2N]-S[1,2,5] |
| BTA8-R[1,2,5]-[S1N,S2N] |
| BTA8-R[1,2,5]-S[1,2,5] |
| BTAA1-[R1N,R2N]-[S1N,S2N] |
| BTAA1-[R1N,R2N]-S[1,2,5] |
| BTAA1-R[1,2,5]-[S1N,S2N] |
| BTAA1-R[1,2,5]-S[1,2,5] |
| BTAA2-[R1N,R2N]-[S1N,S2N] |
| BTAA2-[R1N,R2N]-S[1,2,5] |
| BTAA2-R[1,2,5]-[S1N,S2N] |
| BTAA2-R[1,2,5]-S[1,2,5] |
| BTAA3-[R1N,R2N]-[S1N,S2N] |
| BTAA3-[R1N,R2N]-S[1,2,5] |
| BTAA3-R[1,2,5]-[S1N,S2N] |
| BTAA3-R[1,2,5]-S[1,2,5] |
| BTAA4-[R1N,R2N]-[S1N,S2N] |
| BTAA4-[R1N,R2N]-S[1,2,5] |
| BTAA4-R[1,2,5]-[S1N,S2N] |
| BTAA4-R[1,2,5]-S[1,2,5] |
| BTAA5-[R1N,R2N]-[S1N,S2N] |
| BTAA5-[R1N,R2N]-S[1,2,5] |
| BTAA5-R[1,2,5]-[S1N,S2N] |
| BTAA5-R[1,2,5]-S[1,2,5] |
| BTAA6-[R1N,R2N]-[S1N,S2N] |
| BTAA6-[R1N,R2N]-S[1,2,5] |
| BTAA6-R[1,2,5]-[S1N,S2N] |
| BTAA6-R[1,2,5]-S[1,2,5] |
| BTAA7-[R1N,R2N]-[S1N,S2N] |
| BTAA7-[R1N,R2N]-S[1,2,5] |
| BTAA7-R[1,2,5]-[S1N,S2N] |
| BTAA7-R[1,2,5]-S[1,2,5] |
Loading...
Basic Information
| Flow | Vertical Through Hole | Material | A5052 | Application | Pneumatic |
|---|
Specification/Dimensions
-
Surface Treatment
- No
- Clear Anodize
-
Block Size(mm)
- 15×15
- 20×20
- 25×25
- 35×35
-
Number of circuits(Ream)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Thread Size / Type
-
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- Not Specified (Through)
- T (Tapped)
- ZT (Counterbore Tapped)
-
Pitch P(mm)
-
Fixed / Designated Pitch
- Configurable Type
- Fixed Type
-
Drawing R Part Thread Dia. M (Coarse) Selection [RM] 3 (M3) 4(M4)
-
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
-
Drawing R Part Thread Dia. PT/PF, M (Coarse) Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Drawing S Part Thread Dia. M (Coarse) Selection [SM] 3 (M3) 4(M4)
-
Drawing S Part Thread Dia. NPT Selection [S]
- 1/4 [S2N]
- 1/8 [S1N]
-
Drawing S Part Thread Dia. PT/PF, M (Coarse) Selection [S] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
type
- BTA
- BTAA
- BTANC
- BTANCA
- BTANCAP
- BTANCP
- BTANL
- BTANLA
- BTANLP
- BTANSA
- BTAP
- G-BTA
- G-BTAA
- G-BTANC
- G-BTANCA
- G-BTANCAP
- G-BTANCP
- G-BTANL
- G-BTANLA
- G-BTANLP
- G-BTANSA
- G-BTAP
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Manifold Blocks - Pneumatic, Outlets 3 Sides, No Inlets, Configurable Mounting Holes
- Manifold Blocks - Hydraulic, Outlets 1 Side, 2 Inlets, Configurable Vertical Mounting Holes
- Terminal Blocks - Pneumatic, Outlets 2 Sides, No Inlets, Configurable Mounting Holes
- Terminal Blocks - Hydraulic, Outlets 2 Sides, No Inlets, Configurable Horizontal Mounting Holes
- Manifold Blocks - Hydraulic or Pneumatic, Outlets 3 Sides, 2 Inlets
- Manifold Blocks - Hydraulic or Pneumatic, Outlets 1 Side, 2 Inlets, Vertical Mounting Holes
- Manifold Blocks - Hydraulic, High-Pressure, Outlets 3 Sides, No Inlets, Configurable Mounting Holes
- Manifold Blocks - Pneumatic, Compact, Outlets 1 Side, 2 Inlets, Horizontal Mounting Holes
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy