(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Manifold Blocks - Pneumatic, Outlets 2 Sides, 2 Inlets, Configurable Mounting Holes (Part Numbers)

Manifold Blocks - Pneumatic, Outlets 2 Sides, 2 Inlets, Configurable Mounting Holes
  • Spec Change

Large orders for 20~50 pcs. are available! G(PF) screws can be specified also.

  • inCAD Components
Manifold Blocks - Pneumatic, Outlets 2 Sides, 2 Inlets, Vertical / Horizontal Mounting:Related Image
・Materials
Type[ M ]Material[ S ]Surface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
25 Square30x40 Square50 Square25 Square30x40 Square50 Square
BMUACBMUAFBMUALBMUACPBMUAFPBMUALPAluminum Alloy-1MPa≈10kgf/cm² or less
BMUACABMUAFABMUALABMUACAPBMUAFAPBMUALAPClear Anodize

Specifications

Part Number - Q - R - G - K - P
Type Mounting Hole Change Circuits
BMUAC
BMUAFP
G-BMUAFP
T
ZT
ZT
2
3
3
-
-
-
Q1
Q1
Q1
-
-
-
R5
R1
R1
-
-
-
G1
G2
G2
-
-
-
K1
K2
K2

-
-

P40
P40


(G Thread)
Part NumberRc (PT), NPT, M (Coarse)Pitch PNumber of Pitches NTotal Number of Q, R, G and K ThreadsABEFXYMounting Hole
TypeMounting Hole ChangeCircuitsQ, R, G, KStandardConfigurable 1mm IncrementM
25 SQ.T (Tapped)11 (1/8)
M3
(M3)*
M4 (M4)*
5 (M5)*
--0425252012.5104M5
Pitch Standard
BMUAC

BMUACA
Pitch Configurable
BMUACP

BMUACAP
21515~5016
328
4310
5412
6514
7*15~40616
8*15~35718
30x40 SQ.ZB
(Back Surface Counterbore)


NA (Through)


T (Tapped)


ZT
(Counterbore Tapped)
11 (1/8)
2
(1/4)
5
(M5)*
1N (NPT1/8)
2N
(NPT1/4)
--04304020207.57M5
Pitch Standard
BMUAF

BMUAFA
Pitch Configurable
BMUAFP

BMUAFAP
23020~5016
328
4310
5412
6514
7*15~40616
8*15~35718
50 SQ.12 (1/4)
3
(3/8)
4
(1/2)
--04505025258.58.5M8
Pitch Standard
BMUAL

BMUALA
Pitch Configurable
BMUALP

BMUALAP
24035~6016
328
4310
5412
6514
[ ! ]For G (PF) Thread please place an order specified with G- before part number. (Ex: G-BMUAF) For ordering, see the Ordering Example.
[ ! ]
For Q, R, G and K, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ). [ ! ]Single Circuit is not available for Pitch Configurable Type.
[ ! ]Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
[ ! ]Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint from the left, 2 and 3 port pitch, and 5 and 6 port pitch.
[ ! ]*When * marked 25 Square or 30x40 Square for 7 or 8 is selected, M3, M4 and 5 (M5) are not available for G and K. [ ! ]M3, M4 and 5 (M5) are not available for 25 Square, 30x40 Square Pitch Configurable Type G and K.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BMUACA4-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA4-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA4-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA4-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA4-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA4-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA4-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA4-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA4-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA4-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA4-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA4-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA5-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA5-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA5-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA5-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA5-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA5-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA5-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA5-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA5-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA5-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA5-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA5-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA5-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA5-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA5-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA5-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA6-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA6-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA6-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA6-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA6-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA6-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA6-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA6-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA6-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA6-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA6-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA6-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA6-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA6-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA6-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA6-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA7-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA7-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA7-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA7-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA7-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA7-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA7-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA7-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA7-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA7-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA7-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA7-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA7-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA7-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA7-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA7-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA8-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA8-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA8-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA8-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA8-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA8-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA8-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA8-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACA8-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUACA8-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUACA8-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUACA8-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUACA8-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUACA8-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUACA8-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUACA8-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUACAP2-Q[1,​5]-R[1,​5]-G1-K1-P[15-50/1]
BMUACAP2-Q[1,​5]-RM[3,​4]-G1-K1-P[15-50/1]
BMUACAP2-QM[3,​4]-R[1,​5]-G1-K1-P[15-50/1]
BMUACAP2-QM[3,​4]-RM[3,​4]-G1-K1-P[15-50/1]
BMUACAP3-Q[1,​5]-R[1,​5]-G1-K1-P[15-50/1]
BMUACAP3-Q[1,​5]-RM[3,​4]-G1-K1-P[15-50/1]
BMUACAP3-QM[3,​4]-R[1,​5]-G1-K1-P[15-50/1]
BMUACAP3-QM[3,​4]-RM[3,​4]-G1-K1-P[15-50/1]
BMUACAP4-Q[1,​5]-R[1,​5]-G1-K1-P[15-50/1]
BMUACAP4-Q[1,​5]-RM[3,​4]-G1-K1-P[15-50/1]
BMUACAP4-QM[3,​4]-R[1,​5]-G1-K1-P[15-50/1]
BMUACAP4-QM[3,​4]-RM[3,​4]-G1-K1-P[15-50/1]
BMUACAP5-Q[1,​5]-R[1,​5]-G1-K1-P[15-50/1]
BMUACAP5-Q[1,​5]-RM[3,​4]-G1-K1-P[15-50/1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSSurface Treatment Block Size
(mm)
Number of circuits
(Ream)
Thread Size / Type Mounting Hole Change Pitch P
(mm)
Fixed / Designated Pitch Drawing G Part Thread Dia. M (Coarse) Selection [GM] 3 (M3) 4(M4) Drawing G Part Thread Dia. NPT Selection [G] Drawing G Part Thread Dia. PT/PF, M (Coarse) Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing K Part Thread Dia. M (Coarse) Selection [KM] 3 (M3) 4(M4) Drawing K Part Thread Dia. NPT Selection [K] Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing Q Part Thread Dia. M (Coarse) Selection [QM] 3 (M3) 4(M4) Drawing Q Part Thread Dia. NPT Selection [Q] Drawing Q Part Thread Dia. PT/PF, M (Coarse) Selection [Q] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing R Part Thread Dia. M (Coarse) Selection [RM] 3 (M3) 4(M4) Drawing R Part Thread Dia. NPT Selection [R] Drawing R Part Thread Dia. PT/PF, M (Coarse) Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 53 ~ 4--

Loading...

 

Basic Information

Flow Lateral Through Holes•L-shaped Hole Type Material A5052 Application Pneumatic

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.