(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Terminal Blocks - Pneumatic, Outlets 2 Sides, No Inlets, Configurable Horizontal Mounting Holes

Terminal Blocks - Pneumatic, Outlets 2 Sides, No Inlets, Configurable Horizontal Mounting Holes
  • Lead Time Reduction

Large orders for 20~50 pcs. are available! G(PF) screws can be specified also.

  • inCAD Components
Terminal Blocks - Pneumatic, Outlets 2 Sides, No Inlets, Horizontal Mounting:Related Image
・Materials
Type[ M ]Material[ S ]Surface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
15 Square20 Square25 Square35 Square20 Square25 Square35 Square
-BTANCBTABTANLBTANCPBTAPBTANLPAluminum Alloy-1MPa≈10kgf/cm² or less
BTANSABTANCABTAABTANLABTANCAP--Clear Anodize
 

Specifications

Part Number-R-S-P
TypeMounting Hole ChangeCircuits
BTA
BTAP
G-BTAP
T
ZT
ZT
3
4
4
-
-
-
R1
R2
R2
-
-
-
S2
S2
S2

-
-

P50
P50

(G Thread)
Part NumberRc (PT), NPT, M (Coarse)Pitch PNumber of Pitches NTotal Number of R and S ThreadsABEXYMounting Hole
TypeMounting Hole ChangeCircuitsR, SStandardConfigurable 1mm IncrementM
15 SQ.T (Tapped)1M3 (M3)
M4 (M4)
5 (M5)
--0215151557.5M4
Pitch Standard
BTANSA
215-14
326
438
5410
6512
7614
8716
20 SQ.11 (1/8)
M3 (M3)
M4 (M4)
5 (M5)
--02202020510M5
Pitch Standard
BTANC
BTANCA
Pitch Configurable
BTANCP
BTANCAP
21515~5014
326
438
5410
6512
7614
8716
25 SQ.NA (Through)


T (Tapped)


ZT
(Counterbore Tapped)
11 (1/8)
2 (1/4)
5 (M5)
1N (NPT1/8)
2N (NPT1/4)
--022525207.512.5M5
Pitch Standard
BTA
BTAA
Pitch Configurable
BTAP
22520~6014
326
438
5410
625~60512
7614
8716
35 SQ.12 (1/4)
3 (3/8)
4 (1/2)
--023535257.517.5M6
Pitch Standard
BTANL
BTANLA
Pitch Configurable
BTANLP
24035~6014
326
438
5410
6512
7614
8716
[ ! ]For G (PF) Thread please place an order specified with G- before part number. (Ex: G-BTA) For ordering, see the Ordering Example.
[ ! ]For R and S, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ). [ ! ]Single Circuit is not available for Pitch Configurable Type. [ ! ]Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
[ ! ]Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint from the left, 2 and 3 port pitch, and 5 and 6 port pitch. (Except 15 and 20 Square)

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BTA1-[R1N,​R2N]-[S1N,​S2N]
BTA1-[R1N,​R2N]-S[1,​2,​5]
BTA1-R[1,​2,​5]-[S1N,​S2N]
BTA1-R[1,​2,​5]-S[1,​2,​5]
BTA2-[R1N,​R2N]-[S1N,​S2N]
BTA2-[R1N,​R2N]-S[1,​2,​5]
BTA2-R[1,​2,​5]-[S1N,​S2N]
BTA2-R[1,​2,​5]-S[1,​2,​5]
BTA3-[R1N,​R2N]-[S1N,​S2N]
BTA3-[R1N,​R2N]-S[1,​2,​5]
BTA3-R[1,​2,​5]-[S1N,​S2N]
BTA3-R[1,​2,​5]-S[1,​2,​5]
BTA4-[R1N,​R2N]-[S1N,​S2N]
BTA4-[R1N,​R2N]-S[1,​2,​5]
BTA4-R[1,​2,​5]-[S1N,​S2N]
BTA4-R[1,​2,​5]-S[1,​2,​5]
BTA5-[R1N,​R2N]-[S1N,​S2N]
BTA5-[R1N,​R2N]-S[1,​2,​5]
BTA5-R[1,​2,​5]-[S1N,​S2N]
BTA5-R[1,​2,​5]-S[1,​2,​5]
BTA6-[R1N,​R2N]-[S1N,​S2N]
BTA6-[R1N,​R2N]-S[1,​2,​5]
BTA6-R[1,​2,​5]-[S1N,​S2N]
BTA6-R[1,​2,​5]-S[1,​2,​5]
BTA7-[R1N,​R2N]-[S1N,​S2N]
BTA7-[R1N,​R2N]-S[1,​2,​5]
BTA7-R[1,​2,​5]-[S1N,​S2N]
BTA7-R[1,​2,​5]-S[1,​2,​5]
BTA8-[R1N,​R2N]-[S1N,​S2N]
BTA8-[R1N,​R2N]-S[1,​2,​5]
BTA8-R[1,​2,​5]-[S1N,​S2N]
BTA8-R[1,​2,​5]-S[1,​2,​5]
BTAA1-[R1N,​R2N]-[S1N,​S2N]
BTAA1-[R1N,​R2N]-S[1,​2,​5]
BTAA1-R[1,​2,​5]-[S1N,​S2N]
BTAA1-R[1,​2,​5]-S[1,​2,​5]
BTAA2-[R1N,​R2N]-[S1N,​S2N]
BTAA2-[R1N,​R2N]-S[1,​2,​5]
BTAA2-R[1,​2,​5]-[S1N,​S2N]
BTAA2-R[1,​2,​5]-S[1,​2,​5]
BTAA3-[R1N,​R2N]-[S1N,​S2N]
BTAA3-[R1N,​R2N]-S[1,​2,​5]
BTAA3-R[1,​2,​5]-[S1N,​S2N]
BTAA3-R[1,​2,​5]-S[1,​2,​5]
BTAA4-[R1N,​R2N]-[S1N,​S2N]
BTAA4-[R1N,​R2N]-S[1,​2,​5]
BTAA4-R[1,​2,​5]-[S1N,​S2N]
BTAA4-R[1,​2,​5]-S[1,​2,​5]
BTAA5-[R1N,​R2N]-[S1N,​S2N]
BTAA5-[R1N,​R2N]-S[1,​2,​5]
BTAA5-R[1,​2,​5]-[S1N,​S2N]
BTAA5-R[1,​2,​5]-S[1,​2,​5]
BTAA6-[R1N,​R2N]-[S1N,​S2N]
BTAA6-[R1N,​R2N]-S[1,​2,​5]
BTAA6-R[1,​2,​5]-[S1N,​S2N]
BTAA6-R[1,​2,​5]-S[1,​2,​5]
BTAA7-[R1N,​R2N]-[S1N,​S2N]
BTAA7-[R1N,​R2N]-S[1,​2,​5]
BTAA7-R[1,​2,​5]-[S1N,​S2N]
BTAA7-R[1,​2,​5]-S[1,​2,​5]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSSurface Treatment Block Size
(mm)
Number of circuits
(Ream)
Thread Size / Type Mounting Hole Change Pitch P
(mm)
Fixed / Designated Pitch Drawing R Part Thread Dia. M (Coarse) Selection [RM] 3 (M3) 4(M4) Drawing R Part Thread Dia. NPT Selection [R] Drawing R Part Thread Dia. PT/PF, M (Coarse) Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing S Part Thread Dia. M (Coarse) Selection [SM] 3 (M3) 4(M4) Drawing S Part Thread Dia. NPT Selection [S] Drawing S Part Thread Dia. PT/PF, M (Coarse) Selection [S] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10No25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10No25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10No25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10No25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10No25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10No25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10No25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10No25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10No25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]--1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [R2N] / 1/8 [R1N]---1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type--1 ~ 5--1 ~ 5

Loading...

 

Basic Information

Flow Vertical Through Hole Material A5052 Application Pneumatic

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.