(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Categories

Applications

Brands

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Part Number Checker

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Manifold Blocks - Pneumatic, Outlets 2 Sides, 2 Inlets, Configurable Mounting Holes

Manifold Blocks - Pneumatic, Outlets 2 Sides, 2 Inlets, Configurable Mounting Holes
  • Spec Change

MISUMI

MISUMI

Large orders for 20~50 pcs. are available! G(PF) screws can be specified also.

  • inCAD Components

PDFP.2019-3295

Part Number

Configured Part Number is shown.

Manifold Blocks - Pneumatic, Outlets 2 Sides, 2 Inlets, Vertical / Horizontal Mounting:Related Image
・Materials
Type[ M ]Material[ S ]Surface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
25 Square30x40 Square50 Square25 Square30x40 Square50 Square
BMUACBMUAFBMUALBMUACPBMUAFPBMUALPAluminum Alloy-1MPa≈10kgf/cm² or less
BMUACABMUAFABMUALABMUACAPBMUAFAPBMUALAPClear Anodize

Specifications

Part Number - Q - R - G - K - P
Type Mounting Hole Change Circuits
BMUAC
BMUAFP
G-BMUAFP		 T
ZT
ZT		 2
3
3		 -
-
-		 Q1
Q1
Q1		 -
-
-		 R5
R1
R1		 -
-
-		 G1
G2
G2		 -
-
-		 K1
K2
K2
-
-
P40
P40

(G Thread)
Part NumberRc (PT), NPT, M (Coarse)Pitch PNumber of Pitches NTotal Number of Q, R, G and K ThreadsABEFXYMounting Hole
TypeMounting Hole ChangeCircuitsQ, R, G, KStandardConfigurable 1mm IncrementM
25 SQ.T (Tapped)11 (1/8)
M3 (M3)*
M4 (M4)*
5 (M5)*		--0425252012.5104M5
Pitch Standard
BMUAC

BMUACA		Pitch Configurable
BMUACP

BMUACAP		21515~5016
328
4310
5412
6514
7*15~40616
8*15~35718
30x40 SQ.ZB
(Back Surface Counterbore)


NA (Through)


T (Tapped)


ZT
(Counterbore Tapped)		11 (1/8)
2 (1/4)
5 (M5)*
1N (NPT1/8)
2N (NPT1/4)		--04304020207.57M5
Pitch Standard
BMUAF

BMUAFA		Pitch Configurable
BMUAFP

BMUAFAP		23020~5016
328
4310
5412
6514
7*15~40616
8*15~35718
50 SQ.12 (1/4)
3 (3/8)
4 (1/2)		--04505025258.58.5M8
Pitch Standard
BMUAL

BMUALA		Pitch Configurable
BMUALP

BMUALAP		24035~6016
328
4310
5412
6514
[ ! ]For G (PF) Thread please place an order specified with G- before part number. (Ex: G-BMUAF) For ordering, see the Ordering Example.
[ ! ]For Q, R, G and K, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ). [ ! ]Single Circuit is not available for Pitch Configurable Type.
[ ! ]Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
[ ! ]Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint from the left, 2 and 3 port pitch, and 5 and 6 port pitch.
[ ! ]*When * marked 25 Square or 30x40 Square for 7 or 8 is selected, M3, M4 and 5 (M5) are not available for G and K. [ ! ]M3, M4 and 5 (M5) are not available for 25 Square, 30x40 Square Pitch Configurable Type G and K.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
BMUAC1-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC1-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC1-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC1-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC1-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC1-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC1-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC1-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC1-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC1-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC1-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC1-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC1-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC1-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC1-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC1-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC2-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC2-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC2-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC2-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC2-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC2-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC2-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC2-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC2-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC2-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC2-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC2-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC2-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC2-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC2-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC2-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC3-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC3-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC3-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC3-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC3-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC3-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC3-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC3-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC3-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC3-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC3-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC3-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC3-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC3-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC3-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC3-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC4-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC4-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC4-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC4-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC4-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC4-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC4-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC4-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC4-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC4-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC4-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC4-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSSurface Treatment Block Size
(mm) 		Number of circuits
(Ream) 		Thread Size / Type Mounting Hole Change Pitch P
(mm) 		Fixed / Designated Pitch Drawing G Part Thread Dia. M (Coarse) Selection [GM] 3 (M3) 4(M4) Drawing G Part Thread Dia. NPT Selection [G] Drawing G Part Thread Dia. PT/PF, M (Coarse) Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing K Part Thread Dia. M (Coarse) Selection [KM] 3 (M3) 4(M4) Drawing K Part Thread Dia. NPT Selection [K] Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing Q Part Thread Dia. M (Coarse) Selection [QM] 3 (M3) 4(M4) Drawing Q Part Thread Dia. NPT Selection [Q] Drawing Q Part Thread Dia. PT/PF, M (Coarse) Selection [Q] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing R Part Thread Dia. M (Coarse) Selection [RM] 3 (M3) 4(M4) Drawing R Part Thread Dia. NPT Selection [R] Drawing R Part Thread Dia. PT/PF, M (Coarse) Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 5--1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4----1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 5--1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4----1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 5--1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4----1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 5--1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4----1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 53 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4--3 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 53 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4--3 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 53 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4--3 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 53 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×251Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4--3 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 5--1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4----1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 5--1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4----1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 5--1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4----1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 5--1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4----1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 53 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4--3 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 53 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4--3 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 53 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4--3 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 53 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4--3 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 5--1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4----1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 5--1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4----1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 5--1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4----1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 5--1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4----1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 53 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4--3 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 53 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4--3 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 53 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4--3 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 53 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4--3 ～ 4--3 ～ 4--
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 5--1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4----1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 5--1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4----1 ～ 5--1 ～ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 5--1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4----1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 5--1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4----1 ～ 53 ～ 4--
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 5--1 ～ 53 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type--1 ～ 53 ～ 4--3 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4----1 ～ 53 ～ 4----1 ～ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15Fixed Type3 ～ 4--3 ～ 4--3 ～ 4----1 ～ 5

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic Information

Flow Lateral Through Holes•L-shaped Hole Type Material A5052 Application Pneumatic

Configure

Clear All

3,454 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Surface Treatment

    • No
    • Clear Anodize

    Clear

  • Block Size(mm)

    • 25×25
    • 30×40
    • 50×50

    Clear

  • Number of circuits(Ream)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8

    Clear

  • Thread Size / Type

    • G (PF) Thread
    • Standard Thread {PT, M (Coarse) Thread}

    Clear

  • Mounting Hole Change

    • NA (Through)
    • Not Specified (Front Surface Counterbore)
    • Not Specified (Through)
    • T (Tapped)
    • ZB (Back Surface Counterbore)
    • ZT (Counterbore Tapped)

    Clear

  • Pitch P(mm)

    • 15
    • 30
    • 40

     [15-60/1mm Unit(s)]

    Clear

  • Fixed / Designated Pitch

    • Configurable Type
    • Fixed Type

    Clear

  • Drawing G Part Thread Dia. M (Coarse) Selection [GM] 3 (M3) 4(M4)

    • 3
    • 4

    Clear

  • Drawing G Part Thread Dia. NPT Selection [G]

    • 1/4 [G2N]
    • 1/8 [G1N]

    Clear

  • Drawing G Part Thread Dia. PT/PF, M (Coarse) Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

    • 1
    • 2
    • 3
    • 4
    • 5

    Clear

  • Drawing K Part Thread Dia. M (Coarse) Selection [KM] 3 (M3) 4(M4)

    • 3
    • 4

    Clear

  • Drawing K Part Thread Dia. NPT Selection [K]

    • 1/4 [K2N]
    • 1/8 [K1N]

    Clear

  • Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

    • 1
    • 2
    • 3
    • 4
    • 5

    Clear

  • Drawing Q Part Thread Dia. M (Coarse) Selection [QM] 3 (M3) 4(M4)

    • 3
    • 4

    Clear

  • Drawing Q Part Thread Dia. NPT Selection [Q]

    • 1/4 [Q2N]
    • 1/8 [Q1N]

    Clear

  • Drawing Q Part Thread Dia. PT/PF, M (Coarse) Selection [Q] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

    • 1
    • 2
    • 3
    • 4
    • 5

    Clear

  • Drawing R Part Thread Dia. M (Coarse) Selection [RM] 3 (M3) 4(M4)

    • 3
    • 4

    Clear

  • Drawing R Part Thread Dia. NPT Selection [R]

    • 1/4 [R2N]
    • 1/8 [R1N]

    Clear

  • Drawing R Part Thread Dia. PT/PF, M (Coarse) Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

    • 1
    • 2
    • 3
    • 4
    • 5

    Clear

  • type

    • BMUAC
    • BMUACA
    • BMUACAP
    • BMUACP
    • BMUAF
    • BMUAFA
    • BMUAFAP
    • BMUAFP
    • BMUAL
    • BMUALA
    • BMUALAP
    • BMUALP
    • G-BMUAC
    • G-BMUACA
    • G-BMUACAP
    • G-BMUACP
    • G-BMUAF
    • G-BMUAFA
    • G-BMUAFAP
    • G-BMUAFP
    • G-BMUAL
    • G-BMUALA
    • G-BMUALAP
    • G-BMUALP

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 10 Days or Less
    • 12 Days or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.
Technical Inquiry

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information
Contact Us

Inquiry Format

Go to Mobile site

Copyright © MISUMI Corporation All Rights Reserved.