(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Manifold Blocks - Pneumatic, Outlets 1 Side, 2 Inlets, Configurable Horizontal Mounting Holes (Part Numbers)

Manifold Blocks - Pneumatic, Outlets 1 Side, 2 Inlets, Configurable Horizontal Mounting Holes
  • Spec Change

Large orders for 20~50 pcs. are available! G(PF) screws can be specified also.

  • inCAD Components
Manifold Blocks - Pneumatic, Outlets 1 Side, 2 Inlets, Horizontal Mounting:Related Image
・Materials
Type[ M ]Material[ S ]Surface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
15 Square25 Square30x40 Square50 Square25 Square30x40 Square50 Square
-BMRACBMRAFBMRALBMRACPBMRAFPBMRALPAluminum Alloy-1MPa≈10kgf/cm² or less
BMRASABMRACABMRAFABMRALABMRACAPBMRAFAPBMRALAPClear Anodize

Specifications

Part Number - R - G - K - P
Type Mounting Hole Change Circuits
BMRAC
BMRAFP
G-BMRAFP
T
ZT
ZT
2
3
3
-
-
-
R5
R1
R1
-
-
-
G1
G2
G2
-
-
-
K1
K2
K2

-
-

P40
P40


(G Thread)
Part NumberRc (PT), NPT, M (Coarse)Pitch PNumber of Pitches NTotal Number of R, G and K ThreadsABEFXYMounting Hole
TypeMounting Hole ChangeCircuitsR, G, KStandardConfigurable 1mm IncrementM
15 SQ.T (Tapped)1M3 (M3)
M4 (M4)
5 (M5)
15-031515151053.5M4
Pitch Standard
BMRASA
214
325
436
547
658
769
8710
25 SQ.11 (1/8)
M3 (M3)*
M4 (M4)*
5 (M5)*
1515~500325252012.5104M5
Pitch Standard
BMRAC
BMRACA
Pitch Configurable
BMRACP
BMRACAP
214
325
436
547
658
7*15~4069
8*15~35710
30x40 SQ.NA (Through)


T (Tapped)


ZT
(Counterbore Tapped)
11 (1/8)
2 (1/4)
5 (M5)*
1N (NPT1/8)
2N (NPT1/4)
3020~500330402020 7.57M5
Pitch Standard
BMRAF
BMRAFA
Pitch Configurable
BMRAFP
BMRAFAP
214
325
436
547
658
7*15~4069
8*15~35710
50 SQ.12 (1/4)
3 (3/8)
4 (1/2)
4035~600350502525 8.58.5M8
Pitch Standard
BMRAL
BMRALA
Pitch Configurable
BMRALP
BMRALAP
214
325
436
547
658
[ ! ]For G (PF) Thread please place an order specified with G- before part number. (Ex: G-BMRAF) For ordering, see the Ordering Example.
[ ! ]For R, G and K, specify 1, 2, 3, 4, 5, M3, M4, 1N, or 2N indicated before ( ). [ ! ]Single Circuit is not available for Pitch Configurable Type.Number of Circuits
[ ! ]Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
[ ! ]Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint from the left, 2 and 3 port pitch, and 5 and 6 port pitch. (Except for 15 Square)
[ ! ]*When * marked 25 Square or 30x40 Square for 7 or 8 is selected, M3, M4 and 5 (M5) are not available for G and K. [ ! ]M3, M4 and 5 (M5) are not available for 25 Square, 30x40 Square Pitch Configurable Type G and K.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BMRACAP8-RM[3,​4]-G1-K1-P[15-35/1]
BMRACAP8-RM[3,​4]-G1-KM[3,​4]-P[15-35/1]
BMRACAP8-RM[3,​4]-GM[3,​4]-K1-P[15-35/1]
BMRACAP8-RM[3,​4]-GM[3,​4]-KM[3,​4]-P[15-35/1]
BMRACAPT2-R[1,​5]-G1-K1-P[15-50/1]
BMRACAPT2-RM[3,​4]-G1-K1-P[15-50/1]
BMRACAPT3-R[1,​5]-G1-K1-P[15-50/1]
BMRACAPT3-RM[3,​4]-G1-K1-P[15-50/1]
BMRACAPT4-R[1,​5]-G1-K1-P[15-50/1]
BMRACAPT4-RM[3,​4]-G1-K1-P[15-50/1]
BMRACAPT5-R[1,​5]-G1-K1-P[15-50/1]
BMRACAPT5-RM[3,​4]-G1-K1-P[15-50/1]
BMRACAPT6-R[1,​5]-G1-K1-P[15-50/1]
BMRACAPT6-RM[3,​4]-G1-K1-P[15-50/1]
BMRACAPT7-R[1,​5]-G1-K1-P[15-40/1]
BMRACAPT7-RM[3,​4]-G1-K1-P[15-40/1]
BMRACAPT8-R[1,​5]-G1-K1-P[15-35/1]
BMRACAPT8-RM[3,​4]-G1-K1-P[15-35/1]
BMRACAT1-R[1,​5]-G[1,​5]-K[1,​5]
BMRACAT1-R[1,​5]-G[1,​5]-KM[3,​4]
BMRACAT1-R[1,​5]-GM[3,​4]-K[1,​5]
BMRACAT1-R[1,​5]-GM[3,​4]-KM[3,​4]
BMRACAT1-RM[3,​4]-G[1,​5]-K[1,​5]
BMRACAT1-RM[3,​4]-G[1,​5]-KM[3,​4]
BMRACAT1-RM[3,​4]-GM[3,​4]-K[1,​5]
BMRACAT1-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMRACAT2-R[1,​5]-G[1,​5]-K[1,​5]
BMRACAT2-R[1,​5]-G[1,​5]-KM[3,​4]
BMRACAT2-R[1,​5]-GM[3,​4]-K[1,​5]
BMRACAT2-R[1,​5]-GM[3,​4]-KM[3,​4]
BMRACAT2-RM[3,​4]-G[1,​5]-K[1,​5]
BMRACAT2-RM[3,​4]-G[1,​5]-KM[3,​4]
BMRACAT2-RM[3,​4]-GM[3,​4]-K[1,​5]
BMRACAT2-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMRACAT3-R[1,​5]-G[1,​5]-K[1,​5]
BMRACAT3-R[1,​5]-G[1,​5]-KM[3,​4]
BMRACAT3-R[1,​5]-GM[3,​4]-K[1,​5]
BMRACAT3-R[1,​5]-GM[3,​4]-KM[3,​4]
BMRACAT3-RM[3,​4]-G[1,​5]-K[1,​5]
BMRACAT3-RM[3,​4]-G[1,​5]-KM[3,​4]
BMRACAT3-RM[3,​4]-GM[3,​4]-K[1,​5]
BMRACAT3-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMRACAT4-R[1,​5]-G[1,​5]-K[1,​5]
BMRACAT4-R[1,​5]-G[1,​5]-KM[3,​4]
BMRACAT4-R[1,​5]-GM[3,​4]-K[1,​5]
BMRACAT4-R[1,​5]-GM[3,​4]-KM[3,​4]
BMRACAT4-RM[3,​4]-G[1,​5]-K[1,​5]
BMRACAT4-RM[3,​4]-G[1,​5]-KM[3,​4]
BMRACAT4-RM[3,​4]-GM[3,​4]-K[1,​5]
BMRACAT4-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMRACAT5-R[1,​5]-G[1,​5]-K[1,​5]
BMRACAT5-R[1,​5]-G[1,​5]-KM[3,​4]
BMRACAT5-R[1,​5]-GM[3,​4]-K[1,​5]
BMRACAT5-R[1,​5]-GM[3,​4]-KM[3,​4]
BMRACAT5-RM[3,​4]-G[1,​5]-K[1,​5]
BMRACAT5-RM[3,​4]-G[1,​5]-KM[3,​4]
BMRACAT5-RM[3,​4]-GM[3,​4]-K[1,​5]
BMRACAT5-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMRACAT6-R[1,​5]-G[1,​5]-K[1,​5]
BMRACAT6-R[1,​5]-G[1,​5]-KM[3,​4]
BMRACAT6-R[1,​5]-GM[3,​4]-K[1,​5]
BMRACAT6-R[1,​5]-GM[3,​4]-KM[3,​4]
BMRACAT6-RM[3,​4]-G[1,​5]-K[1,​5]
BMRACAT6-RM[3,​4]-G[1,​5]-KM[3,​4]
BMRACAT6-RM[3,​4]-GM[3,​4]-K[1,​5]
BMRACAT6-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMRACAT7-R[1,​5]-G[1,​5]-K[1,​5]
BMRACAT7-R[1,​5]-G[1,​5]-KM[3,​4]
BMRACAT7-R[1,​5]-GM[3,​4]-K[1,​5]
BMRACAT7-R[1,​5]-GM[3,​4]-KM[3,​4]
BMRACAT7-RM[3,​4]-G[1,​5]-K[1,​5]
BMRACAT7-RM[3,​4]-G[1,​5]-KM[3,​4]
BMRACAT7-RM[3,​4]-GM[3,​4]-K[1,​5]
BMRACAT7-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMRACAT8-R[1,​5]-G[1,​5]-K[1,​5]
BMRACAT8-R[1,​5]-G[1,​5]-KM[3,​4]
BMRACAT8-R[1,​5]-GM[3,​4]-K[1,​5]
BMRACAT8-R[1,​5]-GM[3,​4]-KM[3,​4]
BMRACAT8-RM[3,​4]-G[1,​5]-K[1,​5]
BMRACAT8-RM[3,​4]-G[1,​5]-KM[3,​4]
BMRACAT8-RM[3,​4]-GM[3,​4]-K[1,​5]
BMRACAT8-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMRACP2-R[1,​5]-G1-K1-P[15-50/1]
BMRACP2-RM[3,​4]-G1-K1-P[15-50/1]
BMRACP3-R[1,​5]-G1-K1-P[15-50/1]
BMRACP3-RM[3,​4]-G1-K1-P[15-50/1]
BMRACP4-R[1,​5]-G1-K1-P[15-50/1]
BMRACP4-RM[3,​4]-G1-K1-P[15-50/1]
BMRACP5-R[1,​5]-G1-K1-P[15-50/1]
BMRACP5-RM[3,​4]-G1-K1-P[15-50/1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSSurface Treatment Block Size
(mm)
Number of circuits
(Ream)
Thread Size / Type Mounting Hole Change Pitch P
(mm)
Fixed / Designated Pitch Drawing G Part Thread Dia. M (Coarse) Selection [GM] 3 (M3) 4(M4) Drawing G Part Thread Dia. NPT Selection [G] Drawing G Part Thread Dia. PT/PF, M (Coarse) Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing K Part Thread Dia. M (Coarse) Selection [KM] 3 (M3) 4(M4) Drawing K Part Thread Dia. NPT Selection [K] Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Drawing R Part Thread Dia. M (Coarse) Selection [RM] 3 (M3) 4(M4) Drawing R Part Thread Dia. NPT Selection [R] Drawing R Part Thread Dia. PT/PF, M (Coarse) Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 35Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 35Configurable Type--13 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 35Configurable Type3 ~ 4----13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 35Configurable Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 50Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 40Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 40Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 35Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15 ~ 35Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×251Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×252Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×253Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×254Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×255Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×256Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×257Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 5--1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4----1 ~ 5
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 5--1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type--1 ~ 53 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4----1 ~ 53 ~ 4--
1 Piece(s)

10 Days or more

10Clear Anodize25×258Standard Thread {PT, M (Coarse) Thread}T (Tapped)15Fixed Type3 ~ 4--3 ~ 4--3 ~ 4--
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10No25×252Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10No25×253Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10No25×254Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4--
1 Piece(s)

10 Days or more

10No25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--1--1 ~ 5
1 Piece(s)

10 Days or more

10No25×255Standard Thread {PT, M (Coarse) Thread}Not Specified (Through)15 ~ 50Configurable Type--1--13 ~ 4--

Loading...

 

Basic Information

Flow Lateral Through Holes•Vertical Semi-Through Hole Type Material A5052 Application Pneumatic

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.