(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Flexible couplings, disc type, high torque and screw clamp fixing. This type of coupling can be selected with one or two intermediate discs, and can also be selected with a wedge slot at either or both ends.
Part Number
Configured Part Number is shown.
Standard Bore | Keywayed Bore | [ M ]Material | [ S ]Surface Treatment | [ A ]Accessories | |||
d1 (One Side) | d2 (One Side) | d1, d2 (Both Sides) | Body | Disc | Body | ||
MCKLC | MCKLCLK | MCKLCRK | MCKLCWK | Aluminum Diecast | Carbon Fiber | Electroless Nickel Plating | Hex Socket Head Cap Screw |
MCKSC | - | - | MCKSCWK |
Part Number | - | Shaft Bore Dia. d1 | - | Shaft Bore Dia. d2 |
MCKLC16 | - | 5 | - | 6 |
MCKLCWK40 | - | 12 | - | 15 |
Part Number | d1, d2 (d1≤d2) [ ! ]Keywayed Bore Type is selectable for diameter 6 or larger | d3 | L | ℓ | A | F | Clamp Screw | |||||||||||||||||||
Type | D | M | Tightening Torque (N·m) | |||||||||||||||||||||||
Double Disc Type MCKLC MCKLCLK MCKLCRK MCKLCWK | 13 | *3 | 4 | 5 | 5.5 | 19 | 5.5 | 4.1 | 2.5 | M2 | 0.42 | |||||||||||||||
16 | *4 | 5 | 6 | 6.8 | 23.2 | 7 | 5 | 3 | M2.5 | 1 | ||||||||||||||||
20 | *4 | 5 | 6 | 6.35 | 7 | 8 | 8.1 | 26 | 7.5 | 6.5 | 3.7 | |||||||||||||||
25 | *5 | 6 | 6.35 | 7 | 8 | 9.53 | 10 | 10.4 | 30.2 | 9 | 8.5 | 4 | M3 | 1.7 | ||||||||||||
32 | 8 | 9.53 | 10 | 11 | 12 | 14 | 15 | 41 | 12.4 | 10 | 6 | M4 | 2.5 | |||||||||||||
40 | 8 | 9.53 | 10 | 11 | 12 | 14 | 15 | 16 | 18 | 19.5 | 47 | 15.5 | 13.1 | 7.8 | M5 | 7 | ||||||||||
50 | 14 | 15 | 16 | 18 | 20 | 22 | 24 | 25 | 53 | 18 | 16.7 | 9 | M6 | 12 |
Part Number | d1, d2 (d1≤d2) [ ! ]Keywayed Bore Type is selectable for diameter 6 or larger | L | ℓ | A | F | Clamp Screw | |||||||||||||||||||
Type | D | M | Tightening Torque (N·m) | ||||||||||||||||||||||
Single Disc Type MCKSC MCKSCWK | 13 | *3 | 4 | 5 | 13.5 | 5.5 | 4.1 | 2.5 | M2 | 0.42 | |||||||||||||||
16 | *4 | 5 | 6 | 16.5 | 7 | 5 | 3 | M2.5 | 1 | ||||||||||||||||
20 | *4 | 5 | 6 | 6.35 | 7 | 8 | 18.4 | 7.5 | 6.5 | 3.7 | |||||||||||||||
25 | *5 | 6 | 6.35 | 7 | 8 | 9.53 | 10 | 21.6 | 9 | 8.5 | 4 | M3 | 1.7 | ||||||||||||
32 | 8 | 9.53 | 10 | 11 | 12 | 14 | 29 | 12.4 | 10 | 6 | M4 | 2.5 | |||||||||||||
40 | 8 | 9.53 | 10 | 11 | 12 | 14 | 15 | 16 | 18 | 35 | 15.5 | 13.1 | 7.8 | M5 | 7 | ||||||||||
50 | 14 | 15 | 16 | 18 | 20 | 22 | 24 | 41 | 18 | 16.7 | 9 | M6 | 12 |
Part Number | Allowable Torque (N·m) | Angular Misalignment (°) | Lateral Misalignment (mm) | Static Torsional Spring Constant (N·m/rad) | Max. Rotational Speed (r/min) | Moment of Inertia (kg·m2) | Allowable Axial Misalignment (mm) | Mass (g) | |
Type | D | ||||||||
MCKLC MCKLCLK MCKLCRK MCKLCWK | 13 | 0.35 | 2.5 | 0.2 | 80 | 12000 | 8.0x10-8 | ±0.2 | 5 |
16 | 0.6 | 130 | 9000 | 2.4x10-7 | ±0.3 | 9 | |||
20 | 0.9 | 220 | 7600 | 7.2x10-7 | 14 | ||||
25 | 2.2 | 440 | 6000 | 2.2x10-6 | ±0.4 | 27 | |||
32 | 3.8 | 960 | 4800 | 6.0x10-6 | 60 | ||||
40 | 6.8 | 0.3 | 1900 | 4000 | 1.7x10-5 | ±0.5 | 104 | ||
50 | 11.0 | 2250 | 3500 | 4.6x10-5 | 210 |
Part Number | Allowable Torque (N·m) | Angular Misalignment (°) | Lateral Misalignment (mm) | Static Torsional Spring Constant (N·m/rad) | Max. Rotational Speed (r/min) | Moment of Inertia (kg·m2) | Allowable Axial Misalignment (mm) | Mass (g) | |
Type | D | ||||||||
MCKSC MCKSCWK | 13 | 0.35 | 1 | 0.05 | 100 | 12000 | 7.0x10-8 | ±0.1 | 4 |
16 | 0.6 | 160 | 9000 | 2.0x10-7 | 7 | ||||
20 | 0.9 | 290 | 7600 | 6.0x10-7 | 11 | ||||
25 | 2.2 | 550 | 6000 | 1.8x10-6 | ±0.2 | 22 | |||
32 | 3.8 | 1200 | 4800 | 5.2x10-6 | 50 | ||||
40 | 6.8 | 0.1 | 2200 | 4000 | 1.3x10-5 | 85 | |||
50 | 11.0 | 2600 | 3500 | 3.6x10-5 | 170 |
Quantity | 1~9 | 10~14 | 15~19 | 20~29 |
Discount Rate | Unit Price | 5% | 10% | 18% |
Shaft Bore Dia. d1, d2 | b | t | Key Nom. Dim. b x h | ||
---|---|---|---|---|---|
Dim. | Tolerance | Dim. | Tolerance | ||
6-7.9 | 2 | ±0.0125 | 1.0 | +0.1 0 | 2x2 |
8-10 | 3 | 1.4 | 3x3 | ||
10.1-12 | 4 | ±0.0150 | 1.8 | 4x4 | |
12.1-17 | 5 | 2.3 | 5x5 | ||
17.1-22 | 6 | 2.8 | 6x6 | ||
22.1-24 | 8 | ±0.0180 | 3.3 | +0.2 0 | 8x7 |
Coupling Type | Disk Tye | With Slit Type | Oldham Type | Jaw Type | Bellows Type | Rigid Type | Universal Joints Type | Chain Couplings Type |
---|---|---|---|---|---|---|---|---|
Photo | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
Shaft Bore Dia | Ø2-60 mm | Ø1.5-35 mm | Ø1-47 mm | Ø3-60 mm | Ø0-62 mm | Ø3-35 mm | Ø1-60 mm | Ø14-55 mm |
Mortor Recommendation | *Servo Motor *Stepping Motors | *Servo Motor *Stepping Motors | *General Purpose Morter | *Stepping Motors *General Purpose Morter | *Stepping Motors | *Servo Motor *Stepping Motors | *Stepping Motors *General Purpose Morter | *General Purpose Morter |
Torque | 0.15-800 N·m | 0.05-35 N·m | 0.06-352 N·m | 0.31-1,350 N·m | 0.3-500 N·m | 0.3-206 N·m | 0.25-495 N·m | 100-2,372 N·m |
Zero Backlash | Excellent | Excellent | Inefficient | Inefficient | Good | Excellent | Inefficient | Inefficient |
Allowable Angular Misalignment | Good | Good | Excellent | Reasonable | Excellent | Inefficient | Excellent | Reasonable |
Allowable Lateral Misalignment | Reasonable | Reasonable | Excellent | Reasonable | Reasonable | Inefficient | Inefficient | Reasonable |
Axial Misalignment | Good | Reasonable | Good | Inefficient | Excellent | Inefficient | Inefficient | Inefficient |
See all options | Click here | Click here | Click here | Click here | Click here | Click here | Click here | Click here |
For more details on each type of coupling click here
Zero backlash, and best suited for high torque servo motor applications. characteristics.
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
MCKLC40-[8,9.53,10,11,12,14,15,16,18]-[8,9.53,10,11,12,14,15,16,18] |
MCKLC40-[8,9.53,10,11,12,14,15,16,18]-RDC[8-18/0.1] |
MCKLC40-LDC[8-18/0.1]-[8,9.53,10,11,12,14,15,16,18] |
MCKLC40-LDC[8-18/0.1]-RDC[8-18/0.1] |
MCKLC50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24] |
MCKLC50-[14,15,16,18,20,22,24]-RDC[14-24/0.1] |
MCKLC50-LDC[14-24/0.1]-[14,15,16,18,20,22,24] |
MCKLC50-LDC[14-24/0.1]-RDC[14-24/0.1] |
MCKLCLK40-[8,9.53,10,11,12,14,15,16,18]-[8,9.53,10,11,12,14,15,16,18] |
MCKLCLK40-[8,9.53,10,11,12,14,15,16,18]-RDC[8-18/0.1] |
MCKLCLK40-LDC[8-18/0.1]-[8,9.53,10,11,12,14,15,16,18] |
MCKLCLK40-LDC[8-18/0.1]-RDC[8-18/0.1] |
MCKLCLK50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24] |
MCKLCLK50-[14,15,16,18,20,22,24]-RDC[14-24/0.1] |
MCKLCLK50-LDC[14-24/0.1]-[14,15,16,18,20,22,24] |
MCKLCLK50-LDC[14-24/0.1]-RDC[14-24/0.1] |
MCKLCRK40-[8,9.53,10,11,12,14,15,16,18]-[8,9.53,10,11,12,14,15,16,18] |
MCKLCRK40-[8,9.53,10,11,12,14,15,16,18]-RDC[8-18/0.1] |
MCKLCRK40-LDC[8-18/0.1]-[8,9.53,10,11,12,14,15,16,18] |
MCKLCRK40-LDC[8-18/0.1]-RDC[8-18/0.1] |
MCKLCRK50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24] |
MCKLCRK50-[14,15,16,18,20,22,24]-RDC[14-24/0.1] |
MCKLCRK50-LDC[14-24/0.1]-[14,15,16,18,20,22,24] |
MCKLCRK50-LDC[14-24/0.1]-RDC[14-24/0.1] |
MCKLCWK40-[8,9.53,10,11,12,14,15,16,18]-[8,9.53,10,11,12,14,15,16,18] |
MCKLCWK40-[8,9.53,10,11,12,14,15,16,18]-RDC[8-18/0.1] |
MCKLCWK40-LDC[8-18/0.1]-[8,9.53,10,11,12,14,15,16,18] |
MCKLCWK40-LDC[8-18/0.1]-RDC[8-18/0.1] |
MCKLCWK50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24] |
MCKLCWK50-[14,15,16,18,20,22,24]-RDC[14-24/0.1] |
MCKLCWK50-LDC[14-24/0.1]-[14,15,16,18,20,22,24] |
MCKLCWK50-LDC[14-24/0.1]-RDC[14-24/0.1] |
Loading...
Series Name | Disc Type | Allowable Misalignment | Angular / Eccentricity / Axial | Application | Standard |
---|---|---|---|---|---|
Features | High Torsional Rigidity / High Torque Type / Zero Backlash / Low Moment of Inertia | Body Material | Aluminum | Category | Coupling Main Body |
Disc Material | Carbon Fiber |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy