(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Precision Linear Shafts - Surface treatment fully plated, nickel plating.
Click this image to zoom it.
Move the mouse over the image to zoom
- Spec Expansion
- Spec Change
One End Tapped or Threaded Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalent and 1045 Carbon Steel Equivalent and 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.
[Diameter range] 8mm - 50mm
[Length range]25mm - 998mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | D Tol. | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | ||||
| Solid | One End Tapped | One End Stepped and Tapped | One End Threaded | One End Threaded with O.D. same as Shaft O.D. | ||||
| PSFCJ | PSFCT | PSFCG | PSFCN | PSFCQ | g6 | 52100 Bearing Steel Equivalent | Effective Hardened Depth of Induction Hardened >> Click here 58HRC~ | Electroless Nickel Plating |
Specifications
| Part Number | - | L | - | F | - | B | - | P | - | M |
| PSFCJ20 | - | 75 | ||||||||
| PSFCT20 | - | 525 | - | M8 | ||||||
| PSFCG20 | - | 400 | - | F25 | - | P16 | - | M10 | ||
| PSFCN20 | - | 950 | - | F50 | - | B30 | - | P10 | ||
| PSFCQ12 | - | 500 | - | B20 |
■Solid Type, One End Tapped Type, One End Stepped and Tapped Type
· One End Tapped Type [ ! ]When Mx2.5+4≥L, tap pilot holes may go through. · One End Stepped and Tapped [ ! ]P≥M+3 [ ! ]When Mx2.5+4≥Y, tap pilot holes may go through.
| Part Number | 1mm Increment | Selection | (Y)Max. | R | C | |||||||||||||||||||||||||
| Type | D | L (Solid / One End Tapped) | L (One End Stepped and Tapped) | F | P | M (One End Tapped) | M (One End Stepped and Tapped) | |||||||||||||||||||||||
| Solid Type PSFCJ One End Tapped Type PSFCT One End Stepped and Tapped PSFCG | 8 | 20~ 800 | 25~798 | 2≤F≤Px4 | 6 | 3 | 4 | 5 | 3 | 800 | 0.3 or Less | 0.5 or Less | ||||||||||||||||||
| 10 | 20~ 800 | 25~798 | 6~ 8 | 3 | 4 | 5 | 6 | 3 | 4 | 5 | 800 | |||||||||||||||||||
| 12 | 20~1000 | 25~998 | 6~10 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 1000 | ||||||||||||||||||
| 15 | 25~1000 | 25~998 | 6~13 | 4 | 5 | 6 | 8 | 10 | 3 | 4 | 5 | 6 | 8 | 10 | 1000 | |||||||||||||||
| 20 | 30~1000 | 25~998 | 6~17 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 12 | 1000 | 1.0 or Less | |||||||||||||
| 25 | 35~1000 | 25~998 | 8~22 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 1000 | ||||||||||||
| 30 | 35~1000 | 25~998 | 9~27 | 6 | 8 | 10 | 12 | 16 | 20 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 1000 | |||||||||||||
| 35 | 35~1000 | 25~998 | 9~32 | 8 | 10 | 12 | 16 | 20 | 24 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | 0.5 or Less | |||||||||||
| 40 | 50~1000 | 25~998 | 11~37 | 10 | 12 | 16 | 20 | 24 | 30 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 | ||||||||||||
| 50 | 65~1000 | 25~998 | 11~47 | 12 | 16 | 20 | 24 | 30 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 | |||||||||||||
■One End Threaded
| Part Number | 1mm Increment | P Selecttion | (Y)Max. | R | C | |||||||||||||
| Type | D | L | F | B | ||||||||||||||
| One End Threaded PSFCN | 8 | 25~798 | 2≤F≤Px5 | (When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (P≥12) B≤F-5 [ ! ]B≥Pitchx3 | 3 | 4 | 5 | 6 | 800 | 0.3 or Less | 0.5 or Less | |||||||
| 10 | 25~798 | 4 | 5 | 6 | 8 | 800 | ||||||||||||
| 12 | 25~998 | 5 | 6 | 8 | 10 | 1000 | ||||||||||||
| 15 | 25~998 | 5 | 6 | 8 | 10 | 12 | 1000 | 1.0 or Less | ||||||||||
| 20 | 25~998 | 6 | 8 | 10 | 12 | 16 | 1000 | |||||||||||
| 25 | 25~998 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | ||||||||||
| 30 | 25~998 | 8 | 10 | 12 | 16 | 20 | 24 | 1000 | ||||||||||
| 35 | 25~998 | 10 | 12 | 16 | 20 | 24 | 30 | 1000 | 0.5 or Less | |||||||||
| 40 | 25~998 | 12 | 16 | 20 | 24 | 30 | 1000 | |||||||||||
| 50 | 25~998 | 16 | 20 | 24 | 30 | 1000 | ||||||||||||
| Coarse Thread Dimension | |
| M | Pitch |
| 3 | 0.5 |
| 4 | 0.7 |
| 5 | 0.8 |
| 6 | 1.0 |
| 8 | 1.25 |
| 10 | 1.5 |
| 12 | 1.75 |
| 16 | 2.0 |
| 20 | 2.5 |
| 24 | 3.0 |
| 30 | 3.5 |
■One End Threaded with O.D. same as Shaft O.D.
[ ! ]For shafts with O.D. same as Shaft O.D., L dimension has priority, thus the effective thread length will be B-(Pitchx2).
| Part Number | 1mm Increment | M | (Y)Max. | R | C | ||
| Type | D | L | B | ||||
| One End Threaded with O.D. same as Shaft O.D. PSFCQ | 8 | 25~793 | 7~ 40 | 8 | 800 | 0.3 or Less | 0.5 or Less |
| 10 | 25~795 | 8~ 50 | 10 | 800 | |||
| 12 | 25~991 | 9~ 60 | 12 | 1000 | |||
| 20 | 25~987 | 13~100 | 20 | 1000 | 1.0 or Less | ||
| 30 | 25~982 | 18~150 | 30 | 1000 | |||
Alterations
[ ! ]When selecting multiple alteration additions, the distance between machined areas should be greater than 2mm. >> Click here
[ ! ]Alterations may lower hardness. Please see>> Click here
[ ! ]For detailed undercut dimensions >> Click here
[ ! ]Alterations may lower hardness. Please see>> Click here
[ ! ]For detailed undercut dimensions >> Click here
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| PSFCQ8-[25-800/1]-B[2-40/1] |
| PSFCQ10-[25-800/1]-B[2-50/1] |
| PSFCQ12-[25-1000/1]-B[2-60/1] |
| PSFCQ20-[25-1000/1]-B[2-100/1] |
| PSFCQ30-[25-1000/1]-B[2-150/1] |
Loading...
More Information
[ ! ]Circularity, Straightness, Perpendicularity
Concentricity, Changes in Hardness >> Click here
[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Shafts may have centering holes at end faces depending on shapes.
Concentricity, Changes in Hardness >> Click here
[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Shafts may have centering holes at end faces depending on shapes.
Basic Information
| Shaft End Perpendicularity | Perpendicularity (0.2) | Material | 52100 Bearing Steel Equivalent | Surface Finish | Electroless Nickel |
|---|---|---|---|---|---|
| Shaft Fits Tolerance | g6 |
Specification/Dimensions
-
Basic Shape
-
Straight -
One End Stepped
-
-
Shaft Dia. D(mm)
-
End Shape (Left)
-
No Machining -
Tapped -
Threaded
-
-
Length L(mm)
-
End Section Type
- One End Stepped and Tapped Shafts
- One End Tapped
- One End Threaded
- One End Threaded Shafts with O.D. same as Shaft O.D.
- Straight
-
B(mm)
-
Coarse Thread [M](mm)
-
F(mm)
-
Fine Tapped [MSC] for M(mm)
-
Thread (Coarse) [P](mm)
-
Thread (Fine) [PMS](mm)
-
Thread (Super-Fine) [PMC](mm)
-
type
- PSFCG
- PSFCJ
- PSFCN
- PSFCQ
- PSFCT
-
End Shape (Right)
-
No Machining -
Threaded
-
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Precision Linear Shafts - Threaded end, thread diameter equal to shaft diameter.
- Precision Linear Shafts - Both ends threaded with wrench flat/ cross.
- Precision Linear Shafts - Both ends threaded, undercut, wrench flat / cross.
- Precision Linear Shafts - One end stepped end, other end tapped or not, wrench flat type.
- Precision Linear Shafts - Hollow, both ends stepped.
- Precision Linear Shafts - Female threaded end, male threaded end (inch).
- Precision Linear Shafts - Threaded end, stepped end, tapped or not tapped end.
- Precision Linear Shafts - Straight, configurable length, without machining, Thomson.
Complementary Products
-
Shaft Supports - T-shape, slim body, with top groove. Shaft adjustment with screw.
MISUMI Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy