(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Suction Cup (Non Marking Type) - Flat/Bellows- (VC-SPS30-ML-M5)
- Volume Discount
[Applications]
· Push the rubber pad against the plastic molded product and grasp the workpiece with air suction
· Install the suction bracket (VC-KNGM) to the tip
[Characteristics]
· As it does not contain the silicone component contained in rubber or mold releasing agents, it suppresses suction marking.
[Chuck Plate Automatic Design Tool]
· Import the molded product data for instant, automatic chuck plate design.
Part Number
Configured Part Number is shown.
VC-SPS30-ML-M5
 Material |  Hardness | Usable Temperature Range | Color |
| Special Synthetic Rubber | Shore A60 | -10 to 140°C | Blue |
| Material | Hardness | Usable Temperature Range | Color |
| Special Synthetic Rubber | Shore A60 | -10 to 140°C | Blue |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Specification Table
| Part Number | - | Material Symbol | - | M |
VC-SPS5 | - | ML | - | M5 |
| VC-HSPS20 | - | ML | - | M5 |
| Applicable Bracket | Installation Type | Cup diameter | Weight (g) *1 | Part Number | Material Symbol | SUCTION BRACKET Mounting Part M | |
| Type | No. | ||||||
| VC-KNGM | Bolt Type | 5 | 1 | VC-SPS (Flat) | 5 | ML (Markless) | M5 |
| 10 | 2 | 10 | |||||
| 15 | 3 | 15 | |||||
| 20 | 3 | 20 | |||||
| 25 | 4 | 25 | |||||
| 30 | 4 | 30 | |||||
| 35 | 5 | 35 | |||||
| 40 | 6 | 40 | |||||
| 3 | 2 | VC-HSPS (Bellows) | 3 | ||||
| 5 | 2 | 5 | |||||
| 9 | 2 | 9 | |||||
| 14 | 3 | 14 | |||||
| 20 | 3 | 20 | |||||
| 25 | 4 | 25 | |||||
*1 The weight is an approximate value. Consider it only as a guideline.
The allowable dimensional tolerances of the rubber parts conform to DIN ISO 3302-1 M3 Since it can adsorb with a minimum of suction marking, it prevents lifting while painting after molding. However, suction marking may remain depending on the usage environment. In order to suppress suction marking to the minimum, wipe the surface of the cup lightly with a cloth moistened with acetone before use, and adsorb 20 to 30 shots on the workpiece. Check with WOS for quantities over display.
Specifications/Overview
■ Features As it does not contain the silicone component contained in rubber or mold releasing agents, it suppresses suction marking.
Usage Example
Basic Information
| Material | No-Mark | Applicable Brackets | VC-KNGM | Installation type | Bolt Type |
|---|
Please check the type/dimensions/specifications of the part VC-SPS30-ML-M5 in the Suction Cup (Non Marking Type) - Flat/Bellows- series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| VC-HSPS3-ML-M5 |
| VC-HSPS5-ML-M5 |
| VC-HSPS9-ML-M5 |
| VC-SPS35-ML-M5 |
| VC-SPS40-ML-M5 |
| VC-SPS5-ML-M5 |
Additional Products in this Category
- Suction Cup - For Suction Bracket / One-touch Fitting Type-
- Suction Metal Fittings / One-touch Fitting Type
- Suction Cup - Baffle Type Suction Bracket -
- BAFFLE TYPE SUCTION BRACKET
- Set Screw for Suction Bracket
- Suction Brackets - Cylindrical Mounting Type-
- Angle Adjustment Bracket - Screw Hole Type -
- Angle Adjustment Bracket - Clamp Type -
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy