(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Volume Discount
Pneumatic Vibration Pad
- Standard Unit Price(USD):
- -
- Days to Ship :
- 10 Days or more
[Applications]
· Used to shake off the powder inside the hopper.
[Features]
· A silicone disc that does not easily damage the hopper.
· Heat-Resistant Temperature: 170°C or less
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs.
The product list can be filtered using the selections found beneath the specification item name.
Drawing
Specifications
Specification Table
More Information
Specifications/Overview
■Usage
1. Drill a φ 22 hole on the hopper.
Attach around the middle of the tapered shape.
2. Remove the washer and nut attached to the main unit,
set so that the bolts of the vibration pad protrude from the inside of the hopper, then attach the washer and nut.
(Refer to the figure for the appearance after mounting.)
3. Install air piping in order to supply compressed air.
The inner diameter of the bolt of the vibration pad is 1/4” NPT thread.
(As the shape is different from 1/4” PT, the use of a NPTNPT⇒ PT conversion plug is recommended.)
Connect the air piping using a plug, coupler, hose joint, etc.
4. Supply air pressure of 0.2 MPa. Since there is constant vibration and pressure during air supply,
powder will not enter the vibration pad.
Since the vibration pad and hopper will be in close contact with each other even when the air supply is stopped and the vibration stops,
there is no ingress of powder.
Usage Example
Usage
- 1. Drill a φ 22 hole in the hopper.
- 2. Remove the washer and nut attached to the main unit, set so that the bolts of the vibration pad protrude from the inside of the hopper, then attach the washer and nut. (Refer to the figure for a usage example after mounting.)
- 3. Install air piping in order to supply compressed air. The inner diameter of the bolt of the vibration pad has 1/4” NPT threading (As the shape is different from 1/4” PT, the use of a NPT⇒ PT conversion plug is recommended.) Connect the air piping using a plug, coupler, hose joint, etc.
- 4. Supply air pressure of 0.2 MPa.Since there is constant vibration and pressure during air supply, powder will not enter the vibration pad.Since the vibration pad and hopper will be in close contact with each other even when the air supply is stopped and the vibration stops, there will be no ingress of powder.
Additional Products in this Category
- High Torque Nuts (MISUMI)
- Magnet for Hopper
- Vacuum Line Magnet (Resin Transport Lines)
- Hoses for Resin Transfer, Antistatic Type
- Hoses for Resin Transfer, Heat-Resistant Type
- Hoses for Transferring Resin, Wear-Resistance Type
- High Torque Bolts (MISUMI)
- Plastic Hopper
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy