(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 1/18/2025 to 4:00 p.m. (CST) 1/19/2025. We apologize for the inconvenience.

Extra Precision One-Step Core Pins -Shaft Diameter (D) Selection/Shaft Diameter Tolerance 0_-0.003/Tip A・V Tolerance±0.005 Type- (Part Numbers)

Extra Precision One-Step Core Pins -Shaft Diameter (D) Selection/Shaft Diameter Tolerance 0_-0.003/Tip A・V Tolerance±0.005 Type-

Click this image to zoom it.

•Shape Type: One-step
•Step Shape Of: No second step
•Material: SKH51
•Shaft Diameter Tolerance: 0/-0.003
•Tip Gradient Tolerance: ±0.005

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CPM-1EG5.5-[6.5-100/0.01]-FC[5-11.99/0.01]-A[1.5-5.49/0.005]-V[1.5-5.49/0.005]-R[0.2-2/0.1]-K[21-60/1]
CPM-1EG5.5-[6.5-100/0.01]-FC[5-11.99/0.01]-A[1.5-5.49/0.005]-VC[1-1.49/0.005]-R[0.2-2/0.1]-K[21-60/1]
CPM-1EG6-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-5.99/0.005]-V[2-5.99/0.005]-R[0.2-2/0.1]-K[21-60/1]
CPM-1EG6-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-5.99/0.005]-VC[1.5-1.99/0.005]-R[0.2-2/0.1]-K[21-60/1]
CPM-1EG6-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-5.99/0.005]-V[2-5.99/0.005]-R[0.2-2/0.1]-K[21-60/1]
CPM-1EG6-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-5.99/0.005]-VC[1.5-1.99/0.005]-R[0.2-2/0.1]-K[21-60/1]
CPM-1EG6.5-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-6.49/0.005]-V[2-6.49/0.005]-R[0.2-2.2/0.1]-K[21-60/1]
CPM-1EG6.5-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-6.49/0.005]-VC[1.5-1.99/0.005]-R[0.2-2.2/0.1]-K[21-60/1]
CPM-1EG6.5-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-6.49/0.005]-V[2-6.49/0.005]-R[0.2-2.2/0.1]-K[21-60/1]
CPM-1EG6.5-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-6.49/0.005]-VC[1.5-1.99/0.005]-R[0.2-2.2/0.1]-K[21-60/1]
CPM-1EG7-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-6.99/0.005]-V[2-6.99/0.005]-R[0.2-2.5/0.1]-K[21-60/1]
CPM-1EG7-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-6.99/0.005]-VC[1.5-1.99/0.005]-R[0.2-2.5/0.1]-K[21-60/1]
CPM-1EG7-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-6.99/0.005]-V[2-6.99/0.005]-R[0.2-2.5/0.1]-K[21-60/1]
CPM-1EG7-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-6.99/0.005]-VC[1.5-1.99/0.005]-R[0.2-2.5/0.1]-K[21-60/1]
CPM-1EG8-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-7.99/0.005]-V[2-7.99/0.005]-R[0.2-3/0.1]-K[21-45/1]
CPM-1EG8-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-7.99/0.005]-VC[1.5-1.99/0.005]-R[0.2-3/0.1]-K[21-45/1]
CPM-1EG8-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-7.99/0.005]-V[2-7.99/0.005]-R[0.2-3/0.1]-K[21-45/1]
CPM-1EG8-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-7.99/0.005]-VC[1.5-1.99/0.005]-R[0.2-3/0.1]-K[21-45/1]
CPM-1EG10-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-9.99/0.005]-V[2-9.99/0.005]-R[0.2-4/0.1]-K[21-60/1]
CPM-1EG10-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-9.99/0.005]-VC[1.5-1.99/0.005]-R[0.2-4/0.1]-K[21-60/1]
CPM-1EG10-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-9.99/0.005]-V[2-9.99/0.005]-R[0.2-4/0.1]-K[21-60/1]
CPM-1EG10-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-9.99/0.005]-VC[1.5-1.99/0.005]-R[0.2-4/0.1]-K[21-60/1]
CPM-1EG13-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-12.99/0.005]-V[2-12.99/0.005]-R[0.2-5.5/0.1]-K[21-60/1]
CPM-1EG13-[6.5-100/0.01]-F[12-99.5/0.01]-A[2-12.99/0.005]-VC[2-2.49/0.005]-R[0.2-5.5/0.1]-K[21-60/1]
CPM-1EG13-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-12.99/0.005]-V[2-12.99/0.005]-R[0.2-5.5/0.1]-K[21-60/1]
CPM-1EG13-[6.5-100/0.01]-FC[5-11.99/0.01]-A[2-12.99/0.005]-VC[2-2.49/0.005]-R[0.2-5.5/0.1]-K[21-60/1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSL dimension tolerance D/P (Shaft diameter)
(mm)
Step (Step shape of the first step) Shape (Tip shape) A (Step shape diameter)
(mm)
C (Step type taper width)
(mm)
CVC (Designation of C dimension in increments of 0.01mm)
(mm)
F (Bearing bore length)
(mm)
FC (Makes F dimension shorter than F min)
(mm)
G (Tip C chamfering width)
(mm)
K (Tip angle)
(°)
L (L dimension)
(mm)
Q (Tip R chamfering)
(mm)
R (Step type R)
(mm)
S (Tip tapered width)
(mm)
V (Tip diameter)
(mm)
VC (V dimension alteration, smaller than V min)
(mm)
1 Piece(s)

8 Days or more

100/-0.055.51EG1.5 ~ 5.49---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 2-1.5 ~ 5.49-
1 Piece(s)

8 Days or more

100/-0.055.51EG1.5 ~ 5.49---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 2--1 ~ 1.49
1 Piece(s)

8 Days or more

100/-0.0561EG2 ~ 5.99--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 2-2 ~ 5.99-
1 Piece(s)

8 Days or more

100/-0.0561EG2 ~ 5.99--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 2--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.0561EG2 ~ 5.99---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 2-2 ~ 5.99-
1 Piece(s)

8 Days or more

100/-0.0561EG2 ~ 5.99---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 2--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.056.51EG2 ~ 6.49--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 2.2-2 ~ 6.49-
1 Piece(s)

8 Days or more

100/-0.056.51EG2 ~ 6.49--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 2.2--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.056.51EG2 ~ 6.49---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 2.2-2 ~ 6.49-
1 Piece(s)

8 Days or more

100/-0.056.51EG2 ~ 6.49---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 2.2--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.0571EG2 ~ 6.99--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 2.5-2 ~ 6.99-
1 Piece(s)

8 Days or more

100/-0.0571EG2 ~ 6.99--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 2.5--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.0571EG2 ~ 6.99---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 2.5-2 ~ 6.99-
1 Piece(s)

8 Days or more

100/-0.0571EG2 ~ 6.99---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 2.5--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.0581EG2 ~ 7.99--12 ~ 99.5--21 ~ 456.5 ~ 100-0.2 ~ 3-2 ~ 7.99-
1 Piece(s)

8 Days or more

100/-0.0581EG2 ~ 7.99--12 ~ 99.5--21 ~ 456.5 ~ 100-0.2 ~ 3--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.0581EG2 ~ 7.99---5 ~ 11.99-21 ~ 456.5 ~ 100-0.2 ~ 3-2 ~ 7.99-
1 Piece(s)

8 Days or more

100/-0.0581EG2 ~ 7.99---5 ~ 11.99-21 ~ 456.5 ~ 100-0.2 ~ 3--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.05101EG2 ~ 9.99--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 4-2 ~ 9.99-
1 Piece(s)

8 Days or more

100/-0.05101EG2 ~ 9.99--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 4--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.05101EG2 ~ 9.99---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 4-2 ~ 9.99-
1 Piece(s)

8 Days or more

100/-0.05101EG2 ~ 9.99---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 4--1.5 ~ 1.99
1 Piece(s)

8 Days or more

100/-0.05131EG2 ~ 12.99--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 5.5-2 ~ 12.99-
1 Piece(s)

8 Days or more

100/-0.05131EG2 ~ 12.99--12 ~ 99.5--21 ~ 606.5 ~ 100-0.2 ~ 5.5--2 ~ 2.49
1 Piece(s)

8 Days or more

100/-0.05131EG2 ~ 12.99---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 5.5-2 ~ 12.99-
1 Piece(s)

8 Days or more

100/-0.05131EG2 ~ 12.99---5 ~ 11.99-21 ~ 606.5 ~ 100-0.2 ~ 5.5--2 ~ 2.49
Part Number
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSL dimension tolerance D/P (Shaft diameter)
(mm)
Step (Step shape of the first step) Shape (Tip shape) A (Step shape diameter)
(mm)
C (Step type taper width)
(mm)
CVC (Designation of C dimension in increments of 0.01mm)
(mm)
F (Bearing bore length)
(mm)
FC (Makes F dimension shorter than F min)
(mm)
G (Tip C chamfering width)
(mm)
K (Tip angle)
(°)
L (L dimension)
(mm)
Q (Tip R chamfering)
(mm)
R (Step type R)
(mm)
S (Tip tapered width)
(mm)
V (Tip diameter)
(mm)
VC (V dimension alteration, smaller than V min)
(mm)

Loading...

Basic Information

Shape type One-step Material SKH51 Shaft diameter tolerance 0/-0.003
Tip gradient tolerance ±0.005 Surface treatment No Head thickness 4mm(T4)
Step (Step shape of the second step) No second step

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.