(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Flying Cam Unit for High Tensile Steel T8-MGFV65(θ=00-45)
- New Products
- Volume Discount
Flying cam unit for piercing high tensile steel. Cam width=65mm, angle (θ)=00-45
Part Number
Configured Part Number is shown.
T8-MGFV65-40
Outline Drawing / Product Specifications
■Rear removal space
When mounting on a die, ensure sufficient space for rear removal.
* Dowel hole center is datum for tolerance
Specifications
| W | θ | A | B | C | E | F | G | H | J | L | V1 | x |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 65 | 00 | 170 | 110 | 60 | 53 | 127 | 180 | 60 | 33 | 24 | 65 | 33 |
| 05 | 171.41 | 116.41 | 55 | 60.27 | 119.73 | 58 | 22 | 22 | 44 | |||
| 10 | 177.16 | 122.16 | 63.06 | 116.94 | 61 | 20 | 48 | |||||
| 15 | 177.2 | 127.2 | 50 | 66.33 | 113.67 | 65 | 19 | |||||
| 20 | 176.51 | 136.51 | 40 | 70.01 | 109.99 | 70 | 18 | 57 | ||||
| 25 | 172.94 | 137.94 | 35 | 75.64 | 104.36 | 73 | ||||||
| 30 | 177.78 | 147.78 | 30 | 78.32 | 101.68 | 79 | 17 | 65 | ||||
| 35 | 173.29 | 153.29 | 20 | 83.25 | 96.75 | 83 | ||||||
| 40 | 170.78 | 160.78 | 10 | 82.44 | 97.56 | 94 | 75 | |||||
| 45 | 165.5 | 163 | 2.5 | 86.51 | 93.49 | 97 |
| Slide Stroke S | Working Force (kN) (tonf) | Spring Load (N) (kgf) | Total Weight (kg) | Part Number | W | θ | |||
|---|---|---|---|---|---|---|---|---|---|
| Standard Working Force (1 million strokes) | Max. Working Force (300,000 strokes) | Preload | 5 mm before bottom dead center | Max. Load | |||||
| 15.4 | 39.2 (4.0) | 78.5 (8.0) | 5000 (510) | 5448 (556) | 7629 (778) | 10.0 | T8-MGFV | 65 | 00 |
| 15.6 | 5409 (552) | 7309 (746) | 9.8 | 05 | |||||
| 15.6 | 5371 (548) | 7014 (716) | 9.7 | 10 | |||||
| 16.1 | 5356 (547) | 7245 (739) | 9.5 | 15 | |||||
| 16.6 | 5342 (545) | 7077 (722) | 9.4 | 20 | |||||
| 17.2 | 5347 (546) | 7077 (722) | 9.3 | 25 | |||||
| 18.5 | 5336 (544) | 6918 (706) | 9.1 | 30 | |||||
| 19.5 | 5342 (545) | 9.1 | 35 | ||||||
| 21.9 | 5356 (547) | 8.9 | 40 | ||||||
| 23.7 | 5365 (547) | 8.8 | 45 | ||||||
Ordering Example
Alterations
Related Information
■Features of the T-MGFV Series
·Supports High Working Force
Working force is increased by reviewing material for each component, sliding surface area, tucking angle, and improving wear resistance.
·Mounting Compatibility
Has mounting compatibility with standard flying cam units (MGFV65, 80) because the mounting surface position, shut height, mounting surface area, and mounting hole location are the same.
·Bite Prevention
Generates a sufficient cam return force (approx. 9% of the allowable machining force) by adopting a gas spring.
This resolves the lack of stripper force of conventional cam units.
■Cam Diagram
[T8-MGFV]
■Component List
| No. | Part Name | Material / Note | Quantity |
| ① | Cam holder | FCD450 | 1 |
| ② | Cam slider | FCD450 | 1 |
| ③ | Cam driver | FC250 | 1 |
| ④ | Wear plate | Copper alloy + Special solid lubricant | 2 |
| ⑤ | Cam positive return plate A | S45C | 1 |
| ⑥ | Cam positive return plate B | S45C | 1 |
| ⑦ | Cam slider guide | Copper alloy + Special solid lubricant | 1 |
| ⑧ | Stopper plate | SS400 | 1 |
| ⑨ | Safety plate | SS400 | 1 |
| ⑩ | Nitrogen gas spring | GSP32-25 (θ = 00 to 10) GSP32-20 (θ = 15 to 70) | 1 |
| ⑪ | Silent stopper | Urethane | 2 |
| ⑫ | Dowel pin | φ8 × 30 | 2 |
| ⑬ | Hexagon socket head cap screw | M6 × 15 | 2 |
| ⑭ | Low head hexagon socket head cap screw | M 8 × 20 | 6 |
| ⑮ | Hexagon socket head cap screw | M6 × 10 | 2 |
| ⑯ | Hexagon socket head cap screw | M10 × 25 | 2 |
| ⑰ | Hexagon socket head cap screw | M 8 × 20 | 2 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Basic Information
| Cam Types | Standard Type for Piercing | Capacity(tonf) | 8 | Installation space(mm) | 65 |
|---|---|---|---|---|---|
| Tilt angle(°) | 40 | Alterations | With |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Rigid Flying Cam Units MGFLL / MEFLL 65 (θ=00-50)
- NAAMS Standard Flying Cam Units MGFNS / MEFNS 300/400 (θ=00-45)
- NAAMS Standard Flying Cam Units MGFNS / MEFNS 70 (θ=00-40)
- Flying Cam Units for Trim & Flange MGFTT / MEFTT 65
- Compact Flying Cam Units for Heavy Load Pierce MGFVA / MEVAN 52 (θ=00-20)
- Flying Cam Units for Heavy Load Pierce MGFVH / MEVHN 65 (θ=00-55)
- Compact Long Stroke Flying Cam Units for Pierce MGFVL / MEVLN 52 (θ=45-50)
- Flying Cam Units for Heavy Load Pierce MGFVS / MEVSN 150-70
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy