(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Threaded, Stainless Steel, Coarse
MISUMI
•Operating Environment: Manufacturing Equipment
•Application: Light Metal
•Material: 304 Stainless Steel
•Screw Type: Metric (fine) Thread
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Threaded, Slotted, Self-Tapping
MISUMI
•Operating Environment: Manufacturing Equipment
•Application: Light Metal
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric【1-3 Pieces Per Package】
Recoil
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
Days to Ship: | 8 Days or more |
---|
Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert【1-5,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Press Fit, SL Type【1-5,000 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8
Days to Ship: | 8 Days or more |
---|
Inserts - Threaded, Stainless Steel, E-Sert
Precision Tsugami
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Days to Ship: | 7 Days or more |
---|
Inserts - Self Tapping, Ultra Coarse, Type 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Self Tapping, Chip-Free, Long, Type 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: | 8 Days or more |
---|
Inserts - Threaded, Metric Fine【1-10 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Days to Ship: | 7 Days or more |
---|
Recoil Tangless Insert Locking Type (SUS304), mm
Recoil
Lock-type Tangless insert provides a detent effect for the bolt installed.
[Features]
·Stress is distributed over the entire length of fit, preventing the thread breakage and increasing the holding or tensile strength, which as a result, enhances the fastening force greater than the original screw
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
[Applications]
·Application example: Semiconductor equipment parts, air tools, industrial robots, etc.
Days to Ship: | 11 Days or more |
---|
Inserts - Tangless Insert Replacement Tool
Accurate
•Category: Tool
For complete product overview and details on Inserts - Tangless Insert Replacement Tool see the sections below:
Days to Ship: | 10 Days or more |
---|
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-5,000 Pieces Per Package】
Tokai
These inserts are the best choice for easy and secure fitment into plastic holes.
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Trade Series Recoil Thread Repair Kit, Metric
Recoil
Application: Insertion / Removal
Category: Tool
Material: Stainless steel (SUS303 / SUS304)
Sale Unit: Low Quantity Available beginning with 1 pc.
For complete product overview and details on Inserts - Trade Series Recoil Thread Repair Kit, Metric see the sections below:
Days to Ship: | 9 Days or more |
---|
Inserts - Threaded, Inch Fine, with Notch【10 Pieces Per Package】
Recoil
*Unfortunately, only lengths of 1.5D are available.
[Features]
•Recoil created by winding high quality stainless steel wire with a rhomboid cross section into a spring shape
•Insert is made one turn larger than the base material hole, and has a mild taper
•Once installed, the spring action makes it an almost permanent fixture that cannot be extracted.
Days to Ship: | 8 Days or more |
---|
Inserts - Recoil Free Running Thread, Stainless Steel, Inch Coarse
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Days to Ship: | 8 Days or more |
---|
Inserts - Self Tapping, Chip-Free, Short, Type 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: | 8 Days or more |
---|
Inserts - Ensat Mechanical Machining Tool, Type 620
KKV
•Category: Tool
For complete product overview and details on Inserts - Ensat Mechanical Machining Tool, Type 620 see the sections below:
Days to Ship: | 8 Days or more |
---|
Japan Drive It
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2
Days to Ship: | 8 Days or more |
---|
Inserts - Tapping Tools for Threaded Inserts
MISUMI
•Category: Tool
For complete product overview and details on Inserts - Tapping Tools for Threaded Inserts see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Threaded Insert Installation Tool, Black Oxide Finish
MISUMI
•Category: Tool
For complete product overview and details on Inserts - Threaded Insert Installation Tool, Black Oxide Finish see the sections below:
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Threaded Insert Installation Tool, Self-Tapping
MISUMI
•Category: Tool
For complete product overview and details on Inserts - Threaded Insert Installation Tool, Self-Tapping see the sections below:
Days to Ship: | 8 Days or more |
---|
Inserts - Tangless Insert Installation and Removal Tools
MISUMI
•Category: Tool
For complete product overview and details on Inserts - Tangless Insert Installation and Removal Tools see the sections below:
Days to Ship: | 8 Days or more |
---|
Inserts - Threaded Insert Installation Tool, E-Sert, P Type
Precision Tsugami
•Category: Tool
•Sale Unit: Low Quantity Available beginning with 1 pc.
•Operating Environment: Manufacturing Equipment
•Material: Steel
•Screw Type: Metric (coarse) Thread
Days to Ship: | 8 Days or more |
---|
Inserts - Threaded, Floating【1-1,000 Pieces Per Package】
Sel Japan
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
Days to Ship: | 8 Days or more |
---|
Inserts - Press Fit, Brass, Cadmium-Free, SD Type【1-2,000 Pieces Per Package】
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Press Fit, C TEC (CT Type)【100 Pieces Per Package】
Bohsei
Verification work on the embedded direction is not necessary because both ends have the same shape, which allows for faster work. Recommended when considering the use of parts feeders for automation.
Days to Ship: | 8 Days or more |
---|
Inserts - Trade Series Recoil Thread Repair Kit, Inch Coarse
Recoil
Application: Insertion / Removal
Category: Tool
Material: Stainless steel (SUS303 / SUS304)
Sale Unit: Low Quantity Available beginning with 1 pc.
Screw Type For Tap: Unify (coarse) Thread
For complete product overview and details on Inserts - Trade Series Recoil Thread Repair Kit, Inch Coarse see the sections below:
Days to Ship: | 9 Days or more |
---|
Inserts - Threaded, Stainless Steel, with Notch, Metric【5-10 Pieces Per Package】
Recoil
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Recoil Threaded, Nitronic 60
Recoil
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
Days to Ship: | 8 Days or more |
---|
Inserts - Tangless, Stainless Steel
Recoil
•Category: Tangless
•Sale Unit: Low Quantity Available beginning with 1 pc.
•Application: Light Metal
•Material: Stainless steel (SUS303 / SUS304)
•Screw Type: Metric (coarse) Thread
Days to Ship: | 8 Days or more |
---|
Inserts - Self Tapping, Three Hole, Short, Type 307
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: | 8 Days or more |
---|
Inserts - Self Tapping, Three Hole, Short, Type 308
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: | 8 Days or more |
---|
Inserts - Ensat Mechanical Machining Extension Tool, Type 621
KKV
A machine processing tool for Ensat. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Days to Ship: | 9 Days or more |
---|
Inserts - Press Fit, TEC Type【1-500 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D 2.5D
[Length] B (mm) 3.9 5.7 8.2 9.5 12.7
Days to Ship: | 8 Days or more |
---|
Recoil
A tool that breaks off the tongue with the repulsive force of the spring.
[Features]
・ The same force is always applied to the tongue and it can be folded off correctly
[Applications]
・ Production line, etc.
Days to Ship: | 11 Days or more |
---|
Recoil Locking Type (SUS304) UNC
Recoil
Lock-type Tangless insert provides a detent effect for the bolt installed.
[Features]
·Stress is distributed over the entire length of fit, preventing the thread breakage and increasing the holding or tensile strength, which as a result, enhances the fastening force greater than the original screw
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
[Applications]
·Application example: Semiconductor equipment parts, air tools, industrial robots, etc.
Days to Ship: | 11 Days or more |
---|
Recoil Locking Type (SUS304) UNF
Recoil
Lock-type Tangless insert provides a detent effect for the bolt installed.
[Features]
·Stress is distributed over the entire length of fit, preventing the thread breakage and increasing the holding or tensile strength, which as a result, enhances the fastening force greater than the original screw
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
[Applications]
·Application example: Semiconductor equipment parts, air tools, industrial robots, etc.
Days to Ship: | 11 Days or more |
---|
Inserts - Threaded Insert Tang Breaking Tool, Alloy Steel, Black Oxide Finish
MISUMI
•Category: Tool
For complete product overview and details on Inserts - Threaded Insert Tang Breaking Tool, Alloy Steel, Black Oxide Finish see the sections below:
Days to Ship: | 8 Days or more |
---|
Inserts - Threaded Insert Removal Tool, Carbon Steel
MISUMI
•Category: Tool
For complete product overview and details on Inserts - Threaded Insert Removal Tool, Carbon Steel see the sections below:
Days to Ship: | 8 Days or more |
---|
Inserts - Tangless, Threaded, Stainless Steel
MISUMI
Revised Screw Insert. No Need of Breaking Tongue after Insertion. Easy Extraction with a specified tool. Facilitates Insert Operation compared with conventional products.
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Tapping Tools for Tangless Inserts
MISUMI
•Category: Tool
For complete product overview and details on Inserts - Tapping Tools for Tangless Inserts see the sections below:
Days to Ship: | 8 Days or more |
---|
Inserts - Threaded, Stainless Steel, Coarse, 100 Pack【100 Pieces Per Package】
MISUMI
Package-Deal Purchasing recommended for bolts of large volume use.
Days to Ship: | Same day or more |
---|
Show Stock Products
Inserts - Insert Insertion Tool, Tongueless
Accurate
•Category: Tool
For complete product overview and details on Inserts - Insert Insertion Tool, Tongueless see the sections below:
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Category |
Application |
Material |
Screw Type |
Thread Diameter (Inserted) M(mm) |
Thread Diameter (Inserted) unified(inch) |
Length (After Insertion) L (D = Screw Shaft Dia. M) |
Notch |
Shape |
Sales Unit |
Brand | KKV | MISUMI | MISUMI | Recoil | Tokai | Japan Drive It | Precision Tsugami | Nippon Sprew | KKV | KKV | Nippon Sprew | Recoil | Accurate | Tokai | Recoil | Recoil | Recoil | KKV | KKV | Japan Drive It | MISUMI | MISUMI | MISUMI | MISUMI | Precision Tsugami | Sel Japan | Tokai | Bohsei | Recoil | Recoil | Recoil | Recoil | KKV | KKV | KKV | Japan Drive It | Recoil | Recoil | Recoil | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Accurate |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302 | Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric【1-3 Pieces Per Package】 | Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert【1-5,000 Pieces Per Package】 | Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】 | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-5,000 Pieces Per Package】 | Inserts - Threaded, Inch Fine, with Notch【10 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, Inch Coarse | Inserts - Threaded Insert Installation Tool, Black Oxide Finish | Inserts - Press Fit, Brass, Cadmium-Free, SD Type【1-2,000 Pieces Per Package】 | Inserts - Press Fit, C TEC (CT Type)【100 Pieces Per Package】 | Inserts - Trade Series Recoil Thread Repair Kit, Inch Coarse | Inserts - Threaded, Stainless Steel, with Notch, Metric【5-10 Pieces Per Package】 | Inserts - Ensat Mechanical Machining Extension Tool, Type 621 | Inserts - Threaded Insert Tang Breaking Tool, Alloy Steel, Black Oxide Finish | Inserts - Threaded, Stainless Steel, Coarse, 100 Pack【100 Pieces Per Package】 | ||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 7 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 7 Days or more | 11 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Specifications |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
Category | Self-Tapping | - | - | Standard | Standard | Press Fitting | Standard | Standard | Self-Tapping | Self-Tapping | Standard | Tangless | Tool | Standard | Tool | Standard | Standard | Self-Tapping | Tool | Press Fitting | Tool | Tool | Tool | Tool | Tool | Crimped | Standard | Press Fitting | Tool | Standard | Standard | Tangless | Self-Tapping | Self-Tapping | Tool | Press Fitting | Tool | Tangless | Tangless | Tool | Tool | - | Tool | - | Tool |
Application | - | Light Metal | Light Metal | Light Metal | General Resin | - | Light Metal / Cast Iron / General Resin | Light Metal | - | - | Light Metal | Light Metal | - | General Resin | - | Light Metal | Light Metal | - | - | General Resin | - | - | - | - | - | Light Metal | General Resin | General Resin | - | Light Metal | Light Metal | Light Metal | - | - | - | - | - | Light Metal | Light Metal | - | - | Light Metal | - | Light Metal | - |
Material | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel / Brass | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) / Phosphor Bronze | Stainless steel (SUS303 / SUS304) / Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | - | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | - | Brass | - | - | - | - | Steel | Steel / Stainless steel (SUS303 / SUS304) | Brass | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Nitronic 60 | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | - | Brass | - | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | - | - | Stainless steel (SUS303 / SUS304) | - | Stainless steel (SUS303 / SUS304) | - |
Screw Type | Metric (coarse) Thread | Metric (fine) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | - | Unify (Fine) Thread | Unify (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | - | - | - | - | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | - | Unify (coarse) Thread | Unify (Fine) Thread | - | - | - | - | - | - |
Thread Diameter (Inserted) M(mm) | 2.5 ~ 30 | 3 ~ 16 | 3 ~ 12 | 2 ~ 42 | 2 ~ 8 | 2 ~ 10 | 2 ~ 24 | 2 ~ 30 | 3 ~ 16 | 3 ~ 16 | 10 ~ 20 | - | - | 2 ~ 10 | 2 ~ 20 | - | - | 3 ~ 12 | 2.5 ~ 30 | 2 ~ 6 | - | - | - | - | 3 ~ 10 | 3 ~ 4 | 2.6 ~ 8 | 3 | - | 2 ~ 20 | 3 ~ 12 | 2.5 ~ 12 | 3 ~ 16 | 3 ~ 16 | 2.5 ~ 30 | 2 ~ 8 | - | - | - | - | - | 2.5 ~ 10 | - | 3 ~ 8 | - |
Thread Diameter (Inserted) unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5/16-24 ~ 7/16-20 | 1-1/4-7 ~ #10-24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4$4 ~ 8$8 | 10$10 | - | - | - | - | - | - |
Length (After Insertion) L (D = Screw Shaft Dia. M) | - | 1D / 1.5D / 2D / 3D | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D | 1D / 1.5D / 2D / 2.5D / 3D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | - | 1.5D | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D | - | - | - | - | - | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | - | - | 1.5D / 2D | - | 1D / 1.5D | 1.5D | - | - | - | - | 1D / 1.5D / 2D | - |
Notch | - | - | - | Presence | No | No | Presence | Presence | - | - | Presence | Presence | - | No | - | Presence | Presence | - | - | No | - | - | - | - | - | No | No | - | - | Presence | Presence | No | - | - | - | No | - | Presence | Presence | - | - | - | - | - | - |
Shape | Slotted | - | - | - | Standard | Standard | - | - | Standard | Chip-free Type | - | Standard | - | Standard | - | - | - | Chip-free Type | - | Standard | - | - | - | - | - | - | Standard | Standard | - | - | - | - | 3-Hole Type | 3-Hole Type | - | Standard | - | Standard | Standard | - | - | - | - | - | - |
Sales Unit | Low Quantity Available beginning with 1 pc. | - | - | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | - | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | - | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | Low Quantity Available beginning with 1 pc. | - | - | - | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | - | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy