(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
USA Industrials
These general-purpose acetal copolymer sheets are machinable and resist expanding in heat and moisture, so they can be machined to close tolerances. They outperform other materials like nylon in high-moisture environments or when submerged.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M90
Density: 0.051 lbs / cu. in.
Temperature Range: -50° to 180° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
ABS has excellent impact strength to withstand strikes and shocks. It is also easy to thermoform.
Tensile Strength Rating: Good
Impact Strength Rating: Excellent
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R105
Density: 0.038 lbs / cu. in.
Temperature Range: -40° to 190° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Commonly known as acetal copolymer, this material is the easiest to machine, wear-resistant, and moisture-resistant.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M90
Density: 0.051 lbs / cu. in.
Temperature Range: -50° to 180° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Paper laminated with a phenolic resin. XX has moderate strength and good Electrically Insulating properties.
Grade: XX
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Water Absorption Rating: Poor
Hardness: Rockwell M110
Density: 0.049 lbs / cu. in.
Maximum Temperature: 250° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
Plastic Bar and Plastic Sheet - UHMW Polyethylene
USA Industrials
UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Rating: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 70D | Density: 0.034 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
PTFE is the most slippery and wear-resistant. It also has excellent resistance to extreme temperatures and chemicals.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 55D
Density: 0.078 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: FDA, UL 94 V-0, MIL-P-22241 Type II Grade A
Days to Ship: | 13 Days or more |
---|
USA Industrials
Polypropylene plastic sheets are used for its excellent chemical resistance and easy machinability. Used across various applications in the chemical and semiconductor industries.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Excellent
Hardness: Rockwell M85
Density: 0.033 lbs / cu. in.
Temperature Range: 0° to 180° F
Specifications Met: FDA, UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Commonly known as acetal homopolymer, Delrin® acetal is stronger, tougher, and stiffer than other types of acetal. Acetal is the easiest to machine, wear-resistant, and moisture-resistant.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Good
Hardness: Rockwell M94
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 180° F
Days to Ship: | 13 Days or more |
---|
USA Industrials
ABS standard-grade sheets are strong and impact-resistant. It has excellent impact strength to withstand strikes and shocks. It is also easy to thermoform.
Tensile Strength Rating: Good
Impact Strength Rating: Excellent
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R105
Density: 0.038 lbs / cu. in.
Temperature Range: -40° to 190° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Nylon 6/6 has a slippery surface that reduces friction and wear.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M85
Density: 0.041 lbs / cu. in.
Temperature Range: -20° to 210° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Polypropylene is an economical material with moderate resistance to water and chemicals.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Excellent
Hardness: Rockwell M85
Density: 0.033 lbs / cu. in.
Temperature Range: 0° to 180° F
Specifications Met: FDA, UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
PTFE bars are standard-grade and have a naturally slippery surface that makes them suitable for making parts that slide and roll. PTFE resists chemicals and performs well in extreme temperatures.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 55D
Density: 0.078 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: FDA, UL 94 V-0, MIL-P-22241 Type II Grade A
Days to Ship: | 13 Days or more |
---|
USA Industrials
Glass fabric laminated with a flame retardant epoxy resin. G-10/FR4 is strong, machinable, moisture resistant, electrically insulating, and flame resistant.
Grade: G-10/FR4
Color: Yellow
Tensile Strength Rating: Excellent
Impact Strength Rating: Excellent
Water Absorption Rating: Good
Hardness: Rockwell M110
Density: 0.072 lbs / cu. in.
Maximum Temperature: 280° F
Specifications Met: UL 94 V0
Days to Ship: | 13 Days or more |
---|
USA Industrials
Glass fabric laminated with an epoxy resin. G-10 is strong, machinable, moisture resistant, and electrically insulating.
Grade: G-10
Color: Yellow
Tensile Strength Rating: Excellent
Impact Strength Rating: Excellent
Water Absorption Rating: Good
Hardness: Rockwell M110
Density: 0.065 lbs / cu. in.
Maximum Temperature: 270° F
Specifications Met: UL 94 HB
Days to Ship: | 51 Days or more |
---|
Plastic Sheet - Acetal, Delrin®
USA Industrials
These acetal homopolymer sheets are machinable and resist expanding in heat and moisture, so they can be machined to close tolerances. Delrin® acetal is stronger, tougher, and stiffer than other types of acetal.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Good
Hardness: Rockwell M94
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 180° F
Days to Ship: | 13 Days or more |
---|
USA Industrials
Cotton laminated with a phenolic resin. CE is an economical choice with moderate impact strength.
Grade: CE
Color: Brown
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Water Absorption Rating: Poor
Hardness: Rockwell M100
Density: 0.049 lbs / cu. in.
Maximum Temperature: 250° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Linen laminated with a phenolic resin. LE is easy-to-machine and good moisture resistance.
Grade: LE
Color: Brown
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Water Absorption Rating: Poor
Hardness: Rockwell M100
Density: 0.048 lbs / cu. in.
Maximum Temperature: 250° F
Specifications Met: UL 94 HB
Days to Ship: | 51 Days or more |
---|
USA Industrials
G-10/FR4 Garolite Bar is strong, machinable, moisture resistant, electrically insulating, and flame resistant. Glass fabric laminated with a flame retardant epoxy resin.
Grade: G-10/FR4
Color: Yellow
Tensile Strength Rating: Excellent
Impact Strength Rating: Excellent
Water Absorption Rating: Good
Hardness: Rockwell M110
Density: 0.072 lbs / cu. in.
Maximum Temperature: 280° F
Specifications Met: UL 94 V0
Days to Ship: | 13 Days or more |
---|
USA Industrials
Standard-grade nylon 6/6 sheets are lightweight, easy to clean, and reduce noise. They are easy to machine and typically used to replace metal or rubber parts.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M85
Density: 0.041 lbs / cu. in.
Temperature Range: -20° to 210° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Material |
Grade |
Color |
Hole Machining |
Length A Dimension (Inch Product) |
Width B Dimension (Inch Product) |
Plate Thickness T Dimension (Inch Product) |
Brand | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | |||||||||||||||||||
Days to Ship | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 51 Days or more | 13 Days or more | 13 Days or more | 51 Days or more | 13 Days or more | 13 Days or more |
Material | Polyacetal (POM, Duracon) | ABS Resin | Polyacetal (POM, Duracon) | Bakelite | Ultra High-Molecular Polyethylene | Fluororesin (fluoropolymer, PTFE) | Polypropylene | Polyacetal (POM, Duracon) | ABS Resin | MC Nylon | Polypropylene | Fluororesin (fluoropolymer, PTFE) | Bakelite | Bakelite | Polyacetal (POM, Duracon) | Bakelite | Bakelite | Bakelite | MC Nylon |
Grade | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
Color | White / Black | Beige | White / Black | Natural Brown | White / Black | Black | White | White / Black | Beige | Black | White | Black | Yellow | Yellow | White / Black | Natural Brown | Natural Brown | Yellow | Black |
Hole Machining | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Length A Dimension (Inch Product) | 6 ~ 48 | 12 ~ 36 | 12 ~ 48 | 6 ~ 48 | 6 ~ 120 | 12 ~ 48 | 6 ~ 48 | 12 ~ 48 | 6 ~ 48 | 12 ~ 48 | 12 ~ 48 | 6 ~ 48 | 6 ~ 48 | 48 | 6 ~ 48 | 6 ~ 48 | 6 ~ 48 | 12 ~ 48 | 6 ~ 48 |
Width B Dimension (Inch Product) | 6 ~ 24 | 1 1/2 ~ 6 | 1 1/2 ~ 6 | 6 ~ 48 | 1 1/2 ~ 48 | 1 1/2 ~ 4 | 6 ~ 24 | 1 1/2 ~ 6 | 6 ~ 24 | 1 1/2 ~ 6 | 1 1/2 ~ 6 | 6 ~ 24 | 6 ~ 48 | 12 ~ 48 | 6 ~ 24 | 6 ~ 48 | 6 ~ 48 | 2 ~ 4 | 6 ~ 24 |
Plate Thickness T Dimension (Inch Product) | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy