(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Sanitary Fittings（Connection Type 1 (Left or Large Diameter Side)：ISO Ferrule Union）
| Days to Ship |
|
|---|
-
Ferrule - Long, Weld-on, ZFL Series, Sanitary Fittings
Fuji Special
The highly reliable Z Sanitary brand is widely used in the food, medical, and semiconductor industries.
- Volume Discount
Days to Ship: 8 Days or more -
Ferrule - Weld-on, ZFS Series, Sanitary Fittings
Fuji Special
The reliable Zett sanitary brand is widely used in the food, medical, and semiconductor industries.
- Volume Discount
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Ferrule Both Ends, Elbow
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Ferrule Ends, Unequal Diameter, Reducer
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Clamp - ISO Ferrule, Union Fitting, CP2K Series, Sanitary Fittings
Osaka Sanitary
Sanitary clamp for the medium to low pressures
- Volume Discount
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Ferrule Connector
MISUMI
•Type: Fitting
•Fitting Shape: Straight
•Connection Type 1 Left Large Diameter Side: ISO Ferrule Union
•Connection Type 2 Right Small Diameter Side: Weld-On
•Dia., Center: Equal Dia., Concentric- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Ferrule End, Welded End, Elbow
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Ferrule - CLF3-W Series, Sanitary Fittings
Osaka Sanitary
Made in Japan, ISO Standard Compliant
- Volume Discount
Days to Ship: 8 Days or more -
Elbow - 90 Degree, Ferrule, Weld-on, EL-C-W Series, Sanitary Fittings
Osaka Sanitary
Made in Japan—polished inside/outside (#320–400)
[Features]
· Extremely low fluid penetration, which dramatically reduces gasket odor.
· Optimally suited when introducing hazard analysis and critical control points (HACCP).
· Extracts from the material are extremely low, making it optimally suited to ultra-clean processes.
· The rubber properties are retained even at high temperatures.
· Can be sealed sufficiently even in steam plumbing lines (operating temperature: ≤ 145°C).
· Superior sealing properties at high temperatures. Therefore, it is also suitable for aseptic lines and systems.
· Can be used with most drug solutions where conventional rubber was difficult to use.
· Can be used for the following chemical solutions without any problems.
· E.g. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, and nitric acid, etc.- Volume Discount
Days to Ship: 8 Days or more -
Adapter - Threaded, Ferrule, THAD-C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan Internal/External #320–#400 Polishing
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Flange Adapter - Straight, Ferrule, JFAD-C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan, inside/outside 320-400 buff polishing
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Clamp - ISO Ferrule Union Fitting, CP3K Series, Sanitary Fittings
Osaka Sanitary
Sanitary clamps designed for high pressure
- Volume Discount
Days to Ship: 8 Days or more -
Blind Ferrule - Weld-on, ZFB Series, Sanitary Fittings
Fuji Special
The highly reliable Z Sanitary brand is widely used in the food, medical, and semiconductor industries.
- Volume Discount
Days to Ship: 8 Days or more -
Elbow - 90 Degree, Ferrule, Weld-on, ZEL-FW Series, Sanitary Fittings
Fuji Special
The highly reliable Zett sanitary brand is widely used in the food, medical, and semiconductor industries.
- Volume Discount
Days to Ship: 8 Days or more -
Adapter - Hose, Ferrule, ZFA-H Series, Sanitary Fittings
Fuji Special
The reliable Zett sanitary brand is widely used in the food, medical, and semiconductor industries.
- Volume Discount
Days to Ship: 9 Days or more -
Ferrule - Weld-on, FS Series, Sanitary Fittings
Consuss
A sanitary rule with ISO standards. Made in Japan.
- Volume Discount
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Ferrule Cap
MISUMI
Caps for Ferrule
For complete product overview and details on Sanitary Pipe Fittings - Ferrule Cap see the sections below:- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Clamp, Low Pressure
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- inCAD Components
Days to Ship: 5 Days or more -
Sanitary Pipe Fittings - Clamp, Medium/High Pressure
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Sanitary Adapter Fittings - Ferrule End, Threaded End
MISUMI
Conversion fittings for sanitary pipes and other pipe types.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Sanitary Adapter Fittings - Ferrule End, Tapped Socket
MISUMI
Conversion fittings for sanitary pipes and other pipe types.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Ferrule Ends, Tee
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Sanitary Adapter Fittings - Ferrule End, Hose End
MISUMI
Conversion fittings for sanitary pipes and other pipe types.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Welded End, Ferrule End, 45 Degree Elbow
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Welded End, Ferrule End, Reducer
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Welded End, Ferrule End, Eccentric Reducer
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Ferrule Both Ends, 45 Degree Elbow
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Sanitary Adapter Fittings - Flanged End, Ferrule End
MISUMI
•Type: Fitting
•Fitting Shape: Conversion Adapter
•Connection Type 1 Left Large Diameter Side: ISO Ferrule Union
•Connection Type 2 Right Small Diameter Side: Flange
•Dia., Center: Equal Dia., Concentric- Volume Discount
- Lead Time Reduction
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - One-touch Clamp
MISUMI
Clamps which can be quickly assembled.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Sanitary Pipe Fittings - Ferrule Ends, Reducing Tees
MISUMI
The fitting product line-up has become more various.
- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
Sanitary Adapter Fittings - Swaged Sleeve Type
MISUMI
•Type: Fitting
•Nominal O.D. D Dimension Range: 1.0S~2.0S
•Fitting Shape: Conversion Adapter
•Connection Type 1 Left Large Diameter Side: ISO Ferrule Union
•Connection Type 2 Right Small Diameter Side: Swaged Sleeve Fittings- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Ferrule - Weld-on, CLF2-W Series, Sanitary Fittings
Osaka Sanitary
A sanitary rule that is compliant with ISO standards. Made in Japan.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Ferrule - Different Diameters, CLF-WX Series, Sanitary Fittings
Osaka Sanitary
[Features]
· Made in Japan Compliant with ISO stan.ards.- Volume Discount
Days to Ship: 8 Days or more -
Ferrule - Eccentric Diameters, CLF-WXE Series, Sanitary Fittings
Osaka Sanitary
Made in Japan; ISO standard compliant.
- Volume Discount
Days to Ship: 20 Days or more -
Adapter - Hose Barb, Ferrule, HSAD-C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan, inside/outside 320-400 buff polishing
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Reducer - Ferrule, Eccentric Diameters, RDE-2C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan inside/outside 320–400 buff polishing
[Features]
· Extremely low liquid penetration, dramatically reduces gasket aromatization.
· Optimal at the time of introducing HACCP.
· Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
· Retains the rubber properties even at high temperature.
· Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
· With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
· Can be used with most drug solutions where conventional rubber was difficult to use.
· Can be used for the following types of drug solutions without any problems.
· Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.- Volume Discount
Days to Ship: 8 Days or more -
Socket - Threaded, Ferrule, THSC-C Series, Sanitary Fittings
Osaka Sanitary
[Features]
· Made in Japan with internal & external 320 ~ 400# polishing- Volume Discount
Days to Ship: 8 Days or more -
Elbow - 45 Degree, Ferrule, Weld-on, 45EL-C-W Series, Sanitary Fittings
Osaka Sanitary
Made in Japan inside/outside 320–400 buff polishing
- Volume Discount
Days to Ship: 8 Days or more -
Cap - RC Thread, Ferrule, Weld-on, CLF-BRC Series, Sanitary Fittings
Osaka Sanitary
Made in Japan—polished inside/outside (#320–400)
[Features]
· Extremely low liquid penetration, which dramatically reduces gasket odor.
· Optimally suited when introducing hazard analysis and critical control points (HACCP).
· Extracts from the material are extremely low, making it optimally suited to ultra-clean processes.
· The rubber properties are retained even at high temperatures.
· Can be sealed sufficiently even in steam plumbing lines (operating temperature: ≤ 145°C).
· Superior sealing properties at high temperatures. Therefore, it is also suitable for aseptic lines and systems.
· Can be used with most drug solutions where conventional rubber was difficult to use.
· Can be used for the following chemical solutions without any problems.
· E.g. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, and nitric acid, etc.- Volume Discount
Days to Ship: 8 Days or more -
Flange Adapter - Taper, Ferrule, JFAD-C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan with inside/outside 320 - 400 buff polishing
[Features]
· Extremely small liquid penetration, dramatically reduces gasket aromatization.
· Optimal for incorporating HACCP.
· Only a small amount of material is extracted, making it appropriate for ultra clean processes.
· Retains rubberized properties even at high temperature.
· Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
· Features excellent sealing properties at high temperatures and also suitable for aseptic lines and aseptic systems.
· Can be used with most chemical liquids where conventional rubber is difficult to use.
· Can be used for the following types of chemical liquids without any issues.
· Ex. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Reducer - Ferrule, RDC-2C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan with inside/outside 320 - 400 buff polishing
[Features]
· Extremely small liquid penetration, dramatically reduces gasket aromatization.
· Optimal for incorporating HACCP.
· Only a small amount of material is extracted, making it appropriate for ultra clean processes.
· Retains rubberized properties even at high temperature.
· Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
· Features excellent sealing properties at high temperatures and also suitable for aseptic lines and aseptic systems.
· Can be used with most chemical liquids where conventional rubber is difficult to use.
· Can be used for the following types of chemical liquids without any issues.
· Ex. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.- Volume Discount
Days to Ship: 8 Days or more -
Tee - Ferrule, Different Diameters, TEEX-3C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan inside/outside 320–400 buff polishing
[Features]
· Extremely low liquid penetration, dramatically reduces gasket aromatization.
· Optimal at the time of introducing HACCP.
· Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
· Retains the rubber properties even at high temperature.
· Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
· With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
· Can be used with most drug solutions where conventional rubber was difficult to use.
· Can be used for the following types of drug solutions without any problems.
· Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.- Volume Discount
Days to Ship: 15 Days or more -
Adapter - Hose, Ferrule, Different Diameters, HSAD-CX Series, Sanitary Fittings
Osaka Sanitary
Made in Japan inside/outside 320–400 buff polishing
[Features]
· Extremely low liquid penetration, dramatically reduces gasket aromatization.
· Optimal at the time of introducing HACCP.
· Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
· Retains the rubber properties even at high temperature.
· Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
· With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
· Can be used with most drug solutions where conventional rubber was difficult to use.
· Can be used for the following types of drug solutions without any problems.
· Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Clamp - ISO Ferrule, Union Fitting, CP2D Series, Sanitary Fittings
Osaka Sanitary
[Features]
· Supports both 8A to 15A and 1.0S to 1.5S- Volume Discount
Days to Ship: 8 Days or more -
Cap - Ferrule, CLF-B Series, Sanitary Fittings
Osaka Sanitary
Convenient and hygienic ferrule caps.
- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Fitting Shape |
| Connection Type (between Equal Type/Dia. Fittings) |
| Connection Type 1 (Left or Large Diameter Side) |
| Connection Type 2 (Right or Small Diameter Side) |
| Combination of Tee and Cross at Connecting Part (A-B-C) |
| Dia., Center |
| Metal Piece(Fittings etc.,) Material |
| Nominal O.D. D Range |
| Nominal O.D. D(Ø) |
| Surface Finish |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Fuji Special | Fuji Special | MISUMI | MISUMI | Osaka Sanitary | MISUMI | MISUMI | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Fuji Special | Fuji Special | Fuji Special | Consuss | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary | Osaka Sanitary |
| Product Series | Sanitary Pipe Fittings - Ferrule Ends, Unequal Diameter, Reducer | Clamp - ISO Ferrule, Union Fitting, CP2K Series, Sanitary Fittings | Elbow - 90 Degree, Ferrule, Weld-on, EL-C-W Series, Sanitary Fittings | Adapter - Threaded, Ferrule, THAD-C Series, Sanitary Fittings | Flange Adapter - Straight, Ferrule, JFAD-C Series, Sanitary Fittings | Clamp - ISO Ferrule Union Fitting, CP3K Series, Sanitary Fittings | Elbow - 90 Degree, Ferrule, Weld-on, ZEL-FW Series, Sanitary Fittings | Sanitary Pipe Fittings - Welded End, Ferrule End, 45 Degree Elbow | Sanitary Pipe Fittings - Welded End, Ferrule End, Eccentric Reducer | Ferrule - Different Diameters, CLF-WX Series, Sanitary Fittings | Ferrule - Eccentric Diameters, CLF-WXE Series, Sanitary Fittings | Adapter - Hose Barb, Ferrule, HSAD-C Series, Sanitary Fittings | Reducer - Ferrule, Eccentric Diameters, RDE-2C Series, Sanitary Fittings | Socket - Threaded, Ferrule, THSC-C Series, Sanitary Fittings | Elbow - 45 Degree, Ferrule, Weld-on, 45EL-C-W Series, Sanitary Fittings | Cap - RC Thread, Ferrule, Weld-on, CLF-BRC Series, Sanitary Fittings | Flange Adapter - Taper, Ferrule, JFAD-C Series, Sanitary Fittings | Tee - Ferrule, Different Diameters, TEEX-3C Series, Sanitary Fittings | Adapter - Hose, Ferrule, Different Diameters, HSAD-CX Series, Sanitary Fittings | Clamp - ISO Ferrule, Union Fitting, CP2D Series, Sanitary Fittings | |||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 5 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 20 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 15 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Type | Fitting | Fitting | Fitting | Fitting | Clamp | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Clamp | Fitting | Fitting | Fitting | Fitting | Fitting | Clamp | Clamp | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Clamp | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Clamp | Fitting |
| Fitting Shape | Straight | Straight | 90° | Conversion Adaptor | - | Straight | 90° | Straight | 90° | Conversion Adaptor | Conversion Adaptor | - | Straight | 90° | Conversion Adaptor | Straight | Cap | - | - | Conversion Adaptor | Conversion Adaptor | Tees+B4712 | Conversion Adaptor | 45° | Reducers | Reducers | 45° | Conversion Adaptor | - | Tees+B4712 | Conversion Adaptor | Straight | Conversion Adaptor | Conversion Adaptor | Straight | Reducers | Conversion Adaptor | 45° | Conversion Adaptor | Conversion Adaptor | Reducers | Tees+B4712 | Conversion Adaptor | - | Cap |
| Connection Type (between Equal Type/Dia. Fittings) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Type 1 (Left or Large Diameter Side) | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union |
| Connection Type 2 (Right or Small Diameter Side) | Weld-On | Weld-On | ISO Ferrule Union | Weld-On | - | Weld-On | Weld-On | Weld-On | Weld-On | Pipe Threaded | Flange | - | Weld-On | Weld-On | ISO Ferrule Union | Weld-On | - | - | - | Pipe Threaded | Pipe Threaded | ISO Ferrule Union | Hose Adapter | Weld-On | Weld-On | Weld-On | ISO Ferrule Union | Flange | - | ISO Ferrule Union | Swaged Sleeve Fittings | Weld-On | Weld-On | Weld-On | Hose Adapter | ISO Ferrule Union | Pipe Threaded | Weld-On | Pipe Threaded | Flange | ISO Ferrule Union | ISO Ferrule Union | Hose Adapter | - | - |
| Combination of Tee and Cross at Connecting Part (A-B-C) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Common for All Ports | - | - | - | - | - | - | - | Common for All Ports | - | - | - | - | - | - | - | - | - | - | - | Common for All Ports | - | - | - |
| Dia., Center | Equal Dia., Concentric | Equal Dia., Concentric | Equal Dia., Concentric | Unequal Dia., Concentric | - | Equal Dia., Concentric | Equal Dia., Concentric | Equal Dia., Concentric | Equal Dia., Concentric | Unequal Dia., Concentric | Unequal Dia., Concentric | - | Equal Dia., Concentric | Equal Dia., Concentric | Equal Dia., Concentric | Equal Dia., Concentric | - | - | - | Equal Dia., Concentric | Equal Dia., Concentric | Equal Dia., Concentric | Unequal Dia., Concentric | Equal Dia., Concentric | Unequal Dia., Concentric | Unequal Dia., Eccentric | Equal Dia., Concentric | Equal Dia., Concentric | - | Unequal Dia., Concentric | Unequal Dia., Concentric | Equal Dia., Concentric | Unequal Dia., Concentric | Unequal Dia., Eccentric | Unequal Dia., Concentric | Unequal Dia., Eccentric | Unequal Dia., Concentric | Equal Dia., Concentric | Unequal Dia., Concentric | Unequal Dia., Concentric | Unequal Dia., Concentric | Unequal Dia., Concentric | Unequal Dia., Concentric | - | - |
| Metal Piece(Fittings etc.,) Material | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel | - | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel | - | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel | - | - | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel | - | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 316L Stainless Steel | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 316L Stainless Steel | 316L Stainless Steel | - | 304 Stainless Steel / 316L Stainless Steel |
| Nominal O.D. D Range | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 8A~15A / 2.5S to 4S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 80A~200A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 8A~15A / 20A~32A / 40A~65A / 80A~200A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S | 1.0S~2.0S / 8A~15A | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 8A~15A / 80A~200A | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 8A~15A / 80A~200A |
| Nominal O.D. D(Ø) | 1S ～ 4S | 1S ～ 4S | 1.0S ～ 15A | 1.0S ～ 3.0S | - | 1.0S ～ 15A | 1.0S ～ 3.0S | - | - | - | - | - | 1S ～ 4S | 1S ～ 4S | 1S ～ 3S | - | 1.0S ～ 3.0S | 1.0S ～ 15A | 1.0S ～ 3.0S | 1.0S ～ 2.0S | 1.5S ～ 3.0S | 1.0S ～ 15A | 1.0S ～ 3.0S | 1.0S ～ 3.0S | 1.5S ～ 3.0S | 1.5S ～ 3.0S | 1.0S ～ 3.0S | 1.0S ～ 2.5S | 1.0S ～ 2.0S | 1.5S ～ 2.5S | 1.0S ～ 2.0S | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Finish | Machined Finish | Machined Finish | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | - | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | - | Machined Finish | Inner and Outer Surface Grinding | Machined Finish | - | Grinding Only on External Surface | - | - | Inner and Outer Surface Grinding | - | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Only Inner Surface Grinding | - | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Machined Finish | Machined Finish | Machined Finish | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Only Inner Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | - | Grinding Only on External Surface |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Type
- Fitting
- Gaskets
- Clamp
- Others
-
Fitting Shape
-
Connection Type (between Equal Type/Dia. Fittings)
- ISO Ferrule Union
- Weld-On
- Others
-
Connection Type 1 (Left or Large Diameter Side)
-
Connection Type 2 (Right or Small Diameter Side)
-
Combination of Tee and Cross at Connecting Part (A-B-C)
-
Dia., Center
-
Metal Piece(Fittings etc.,) Material
- 304 Stainless Steel
- 316L Stainless Steel
-
Nominal O.D. D Range
-
Metric / Inch
- metric
-
Nominal O.D. D(Ø)
-
Surface Finish
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy