(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Fittings for Steel & Copper Pipes（Thread Size 2：1/4）
Connection Shape
-
Union -
Union, Inside- Outside Thread -
Elbow -
Tee -
Cross
-
Reducer - Compression Tube Fitting, R Series
Fuji Special
The product features a structure/functionality which allows for high tolerance to both external and internal high temperature/heat and durability against vibration, shock and rough handling.
- Volume Discount
Days to Ship: 9 Days or more -
Hex Bushing - Brass, Pipe Fitting, Male NPT to Female NPT, Class 125
USA Industrials
Brass Hex Male x Female Bushing pipe fitting is an excellent choice for use for both hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These compression fittings have specific water pressure applications; class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications.
Days to Ship: 13 Days or more -
Hex Bushing - Nickel-Plated Brass, Pipe Fitting, Female NPT to Male NPT, Class 1000
USA Industrials
Hex Bushing Male - Female NPTF Fitting made of Nickel-Plated Brass has good corrosion resistance and is an excellent choice for use with hot and cold water, and Nickel provides an excellent heat exchanger. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These fittings also have various pressure classes and should be used according to the pressure requirements of the system. Use class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications. Nickel plating ensures the material is more corrosion resistant, less porous, and lower coefficient of friction.
Days to Ship: 13 Days -
Elbow - Reducer, 90°, Brass, Pipe Fitting, Female NPT, Class 125
USA Industrials
Female Elbow Reducer Pipe Fitting made of Brass is an excellent choice for use for both hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These compression fittings have specific water pressure applications; class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications.
Days to Ship: 13 Days -
Hex Bushing - Brass, Pipe Fitting, Female NPT to Male NPT, Class 125
USA Industrials
Brass is an excellent choice for Female-Male NPT Hex Bushing with Thread Sealant for both hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These compression fittings have specific water pressure applications; class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications.
Days to Ship: 81 Days or more -
Coupler - Reducer, Aluminum, Pipe Fitting, Female NPT, Class 150
USA Industrials
Reducing Female NPT Coupling made of Aluminum is lighter weight than steel or copper, and is well-known for being corrosion resistant. Both indoor and outdoor applications include plumbing, and compressed air systems, racks and railings, hydraulic systems, and fuel lines. Heat-conductive capabilities make the material a good alternative to steel. Aluminum pipe fittings come in a variety of sizes and shapes.
Days to Ship: 13 Days or more -
Hex Bushing - Brass, Pipe Fitting, Male BSPT to Female BSPT, Class 125
USA Industrials
Hex Bushing Male - Female pipe fitting made of brass is an excellent choice for use for both hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These compression fittings have specific water pressure applications; class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications.
Days to Ship: 13 Days -
Coupler - Reducer, Brass, Pipe Fitting, Female NPT, Class 125
USA Industrials
Brass Reducing Female Coupling is an excellent choice for use for both hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These compression fittings have specific water pressure applications; class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications.
Days to Ship: 13 Days -
Coupler - Reducer, Brass, Pipe Fitting, Female BSPT, Class 125
USA Industrials
Female Reducing Coupling fitting made of Brass is an excellent choice for use for both hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These compression fittings have specific water pressure applications; class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications.
Days to Ship: 13 Days -
Tees - Reducer, Brass, Pipe Fitting, Female NPT, Class 125
USA Industrials
Brass Reducing Branch Tee piping is an excellent choice for use for both hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These compression fittings have specific water pressure applications; class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications.
Days to Ship: 13 Days -
Hex Bushing - Brass, Pipe Fitting, Female BSPT to Male BSPT, Class 125
USA Industrials
Brass is an excellent choice for Hex Bushing Female - Male BSPT Pipes with Thread Sealant for both hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These compression fittings have specific water pressure applications; class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications.
Days to Ship: 51 Days or more -
Adapter - Reducer, Nickel-Plated Brass, Pipe Fitting, Female NPT to Male NPT, Class 1000
USA Industrials
Reducing Adapter Female-Male NPTF made of Nickel-Plated Brass has good corrosion resistance and is an excellent choice for use with hot and cold water, and Nickel provides an excellent heat exchanger. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These fittings also have various pressure classes and should be used according to the pressure requirements of the system. Use class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications. Nickel plating ensures the material is more corrosion resistant, less porous, and lower coefficient of friction.
Days to Ship: 13 Days -
Hex Nipple - Reducer, Nickel-Plated Brass, Pipe Fitting, Male NPT to Male NPT, Class 1000
USA Industrials
Reducing Hex Nipple Male NPTF made of Nickel-Plated Brass has good corrosion resistance and is an excellent choice for use with hot and cold water, and Nickel provides an excellent heat exchanger. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These fittings also have various pressure classes and should be used according to the pressure requirements of the system. Use class 125 in low-pressure applications, class 250 in medium-pressure applications, and compression/instrumentation fittings in high-pressure applications. Nickel plating ensures the material is more corrosion resistant, less porous, and lower coefficient of friction.
Days to Ship: 13 Days -
Adapter - Reducer, Black Zinc-Plated Brass, Pipe Fitting, Female NPTF to Male NPTF, Class 1000
USA Industrials
Black Zinc-Plated Brass Reducing Adapter Female - Male NPTF Pipe Fitting has good corrosion resistance and zinc offers additional corrosion control or sacrificial anode, and is an excellent choice for use with hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These fittings also have various pressure classes and should be used according to the pressure requirements of the system. Black zinc finish is electrically conductive and offers a greater corrosion protection over a black oxide finish. Zinc coating increases the life-span of the metal and corrodes 100xx slower than other metal coatings.
Days to Ship: 13 Days -
Hex Nipple - Reducer, Black Zinc-Plated Brass, Pipe Fitting, Male NPTF to Male NPTF, Class 1000
USA Industrials
Reducing Hex Male NPTF Nipple made of Black Zinc-Plated Brass has good corrosion resistance and zinc offers additional corrosion control or sacrificial anode, and is an excellent choice for use with hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These fittings also have various pressure classes and should be used according to the pressure requirements of the system. Black zinc finish is electrically conductive and offers a greater corrosion protection over a black oxide finish. Zinc coating increases the life-span of the metal and corrodes 100xx slower than other metal coatings.
Days to Ship: 13 Days -
90° Elbows - Black Zinc-Plated Brass, Pipe Fitting, Female NPTF, Class 1000
USA Industrials
Black Zinc-Plated Brass 90 Degree Elbow has good corrosion resistance and zinc offers additional corrosion control or sacrificial anode, and is an excellent choice for use with hot and cold water. Fittings that comply with NSF/ANSI 61 and NSF/ANSI 372 low-lead standards and can be used with potable water. These fittings also have various pressure classes and should be used according to the pressure requirements of the system. Black zinc finish is electrically conductive and offers a greater corrosion protection over a black oxide finish. Zinc coating increases the life-span of the metal and corrodes 100xx slower than other metal coatings.
Days to Ship: 13 Days -
Hex Bushing - Aluminum, Pipe Fitting, Female NPT to Male NPT, Class 150
USA Industrials
Aluminum Hex Bushing Male - Female NPT pipe fitting is lighter weight than steel or copper, and is well-known for being corrosion resistant. Both indoor and outdoor applications include plumbing, and compressed air systems, racks and railings, hydraulic systems, and fuel lines. Heat-conductive capabilities make the material a good alternative to steel. Aluminum pipe fittings come in a variety of sizes and shapes.
Days to Ship: 13 Days or more -
Elbow - Reducer, 90°, Aluminum, Pipe Fitting, Female NPT to Male NPT, Class 150
USA Industrials
Aluminum Female NPT Elbow Reducer is lighter weight than steel or copper, and is well-known for being corrosion resistant. Both indoor and outdoor applications include plumbing, and compressed air systems, racks and railings, hydraulic systems, and fuel lines. Heat-conductive capabilities make the material a good alternative to steel. Aluminum pipe fittings come in a variety of sizes and shapes.
Days to Ship: 13 Days -
Tees - Reducer, Aluminum, Pipe Fitting, Female NPT, Class 150
USA Industrials
Branch Tee Reducer Female NPT pipe made of Aluminum is lighter weight than steel or copper, and is well-known for being corrosion resistant. Both indoor and outdoor applications include plumbing, and compressed air systems, racks and railings, hydraulic systems, and fuel lines. Heat-conductive capabilities make the material a good alternative to steel. Aluminum pipe fittings come in a variety of sizes and shapes.
Days to Ship: 13 Days
| Brand |
|---|
| Product Series |
| Days to Ship |
| Material |
| Surface Treatment |
| Applicable Fluid |
| Max. Operating Pressure |
| Connection Type |
| Connection Shape |
| Thread Size 1(inch) |
| Thread Size 1(mm) |
| Connection Thread Type |
| Types |
| Types of Related components |
| Fitting type |
| Applicable Pipe Type |
| Applicable Tube Size Type |
| Tube Material |
| Thread Nominal |
| Nominal A 1 |
| Nominal 1(inch) |
| Applicable Pipe O.D. 1(mm) |
| Nominal A 2 [In case of different diameters](mm) |
| Thread Size 2(inch) |
| Thread Size 2(mm) |
| Nominal 2 [In the case of different diameters](inch) |
| Applicable Pipe O.D. 2 [In the case of different diameters](mm) |
| Divisions of Max. Operating Pressure(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Fuji Special | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials |
| Product Series | Hex Bushing - Brass, Pipe Fitting, Male NPT to Female NPT, Class 125 | Hex Bushing - Nickel-Plated Brass, Pipe Fitting, Female NPT to Male NPT, Class 1000 | Elbow - Reducer, 90°, Brass, Pipe Fitting, Female NPT, Class 125 | Hex Bushing - Brass, Pipe Fitting, Female NPT to Male NPT, Class 125 | Coupler - Reducer, Aluminum, Pipe Fitting, Female NPT, Class 150 | Hex Bushing - Brass, Pipe Fitting, Male BSPT to Female BSPT, Class 125 | Coupler - Reducer, Brass, Pipe Fitting, Female NPT, Class 125 | Coupler - Reducer, Brass, Pipe Fitting, Female BSPT, Class 125 | Hex Bushing - Brass, Pipe Fitting, Female BSPT to Male BSPT, Class 125 | Adapter - Reducer, Nickel-Plated Brass, Pipe Fitting, Female NPT to Male NPT, Class 1000 | Hex Nipple - Reducer, Nickel-Plated Brass, Pipe Fitting, Male NPT to Male NPT, Class 1000 | Adapter - Reducer, Black Zinc-Plated Brass, Pipe Fitting, Female NPTF to Male NPTF, Class 1000 | Hex Nipple - Reducer, Black Zinc-Plated Brass, Pipe Fitting, Male NPTF to Male NPTF, Class 1000 | 90° Elbows - Black Zinc-Plated Brass, Pipe Fitting, Female NPTF, Class 1000 | Hex Bushing - Aluminum, Pipe Fitting, Female NPT to Male NPT, Class 150 | Elbow - Reducer, 90°, Aluminum, Pipe Fitting, Female NPT to Male NPT, Class 150 | Tees - Reducer, Aluminum, Pipe Fitting, Female NPT, Class 150 | ||
| Days to Ship | 9 Days or more | 13 Days or more | 13 Days | 13 Days | 81 Days or more | 13 Days or more | 13 Days | 13 Days | 13 Days | 13 Days | 51 Days or more | 13 Days | 13 Days | 13 Days | 13 Days | 13 Days | 13 Days or more | 13 Days | 13 Days |
| Material | Steel | Brass | Brass | Brass | Brass | Steel | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Steel | Steel | Steel |
| Surface Treatment | Not Provided | - | Nickel Plating | - | - | - | - | - | - | - | - | Nickel Plating | Nickel Plating | Not Provided | Not Provided | Not Provided | - | - | - |
| Applicable Fluid | Water / Air / Steam / Oil / Powder | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Operating Pressure | 21 - MPa | 125 | 1000 | 125 | 125 | 150 | 125 | 125 | 125 | 125 | 125 | 1000 | 1000 | 1000 | 1000 | 1000 | 150 | 150 | 150 |
| Connection Type | Pipe to Tube Insert, Unequal Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Shape | Union | - | - | Elbow | - | - | - | - | - | - | - | - | - | - | - | Elbow | - | Elbow | - |
| Thread Size 1(inch) | 1/2 ～ 3/8 | 1 ～ 3/8 | 1/2 ～ 3/8 | 1 ～ 3/8 | 1 ～ 3/8 | 1/2 ～ 3/8 | 1 1/2 ～ 3/4 | 1 | 1/2 ～ 3/8 | 1 ～ 3/8 | 1 1/2 ～ 3/4 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1 ～ 3/8 | 1/2 | 1/2 |
| Thread Size 1(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Thread Type | - | NPT | NPT | NPT | NPT | NPT | R | NPT | Rc | NPT | R | NPT | NPT | NPT | NPT | NPT | NPT | NPT | NPT |
| Types | Fitting | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Types of Related components | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Fitting type | Bite type Fittings | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable Pipe Type | Steel pipe (general) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable Tube Size Type | Steel pipe JIS size | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tube Material | Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Nominal | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal A 1 | 10 ～ 15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal 1(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable Pipe O.D. 1(mm) | 17.3 ～ 21.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal A 2 [In case of different diameters](mm) | 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Size 2(inch) | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 |
| Thread Size 2(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal 2 [In the case of different diameters](inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable Pipe O.D. 2 [In the case of different diameters](mm) | 13.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Divisions of Max. Operating Pressure(MPa) | than 2.0Mpa | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Material
- Steel
- Brass
- Stainless Steel
-
Surface Treatment
-
Applicable Fluid
- Water
- Air
- Steam
- Gas
- Oil
- Powder
-
Metric / Inch
- metric
-
Max. Operating Pressure
-
Connection Type
- Pipe to Tube Insert, Equal Diameter
- Pipe to Tube Insert, Unequal Diameter
- Pipe to Thread Insert
-
Thread Size 1(inch)
-
Thread Size 1(mm)
-
Connection Thread Type
-
Types
- Fitting
- Related Components
-
Types of Related components
- Sleeve
- Ring
- Nut
- Mounting Fitting
- Gasket seal
- Air Bleeding Valve
- Heat-Retention Material
-
Fitting type
- Ring Fitting
- Flare Fittings
- Sleeve-type fittings
- Bite type Fittings
- Mechanical Joint
-
Applicable Pipe Type
- Copper Pipe (General)
- Copper Pipe (for Refrigerant)
- Copper Pipe (Annealed Copper Pipe)
- Copper Pipe (Controlled Copper Pipe)
- Steel pipe (general)
-
Applicable Tube Size Type
- Copper Pipe mm size
- Copper Pipe inch size
- Copper Pipe mm-inch size
- Size for Copper Pipe Refrigerant
- Steel pipe JIS size
- Steel pipe metric size
-
Tube Material
-
Thread Nominal
-
Nominal A 1
-
Nominal 1(inch)
-
Applicable Pipe O.D. 1(mm)
-
Nominal A 2 [In case of different diameters](mm)
-
Thread Size 2(inch)
-
Thread Size 2(mm)
-
Nominal 2 [In the case of different diameters](inch)
-
Applicable Pipe O.D. 2 [In the case of different diameters](mm)
-
Divisions of Max. Operating Pressure(MPa)
- 1.0Mpa or Less
- than 2.0Mpa
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- USA Industrials (18)
- Fuji Special (1)
- Atoms (0)
- Kitz (0)
- Ihara Science (0)
- Sanko Material Supply (0)
- Chiyoda (0)
- Koyo (0)
- CK Metals (0)
- Asoh (0)
- Hitachi Metals (0)
- Inaba Denki (0)
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 4 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
- 14 Days or Less
- 15 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy