(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Fittings for Steel & Copper Pipes(Nominal 2 [In the case of different diameters]:5/8)

A copper pipe / steel pipe fitting is a fitting made of the same material as the pipe used when piping copper pipes or steel pipes. The material of copper pipe fittings used for water supply pipes and general refrigerant pipes is mainly brass, and the steel pipe fitting material suitable for transporting oil, air, gas, etc. is carbon steel. Some products are cadmium-free and lead-free hot-dip galvanized, and others are surface-treated with epoxy resin, which has excellent water and corrosion resistance. In addition to unions, sockets, and reducers that connect straight pipes, elbows that connect pipes by bending them 90 degrees, tees that branch into a T-shape, crosses that branch into four sides, etc. are available. Connections include screw-in connections and welding, as well as ring connections, abacus ball ring connections, etc. that can reduce the piping process. Note that the outer diameter of pipes and fittings is displayed in two types, millimeters and inches, and the outer diameter size may differ between JIS piping and ANSI piping.

Connection Shape

  • Union
  • Union, Inside- Outside Thread
  • Elbow
  • Tee
  • Cross
  1. 1
Brand
Product Series
Days to Ship
Material
Surface Treatment
Applicable Fluid
Max. Operating Pressure
Connection Type
Connection Shape
Thread Size 1(inch)
Thread Size 1(mm)
Connection Thread Type
Types
Types of Related components
Fitting type
Applicable Pipe Type
Applicable Tube Size Type
Tube Material
Thread Nominal
Nominal A 1
Nominal 1(inch)
Applicable Pipe O.D. 1(mm)
Nominal A 2 [In case of different diameters](mm)
Thread Size 2(inch)
Thread Size 2(mm)
Nominal 2 [In the case of different diameters](inch)
Applicable Pipe O.D. 2 [In the case of different diameters](mm)
Divisions of Max. Operating Pressure(MPa)

    Straight Connector - Expander/Reducer, Flare Tube Fitting, Brass, Double, FE Series

      Unions - Expander/Reducer, Compression Tube Fitting, Brass, RE Series

      Brand

      Asoh

      Asoh

      Product Series

      Straight Connector - Expander/Reducer, Flare Tube Fitting, Brass, Double, FE Series

      Unions - Expander/Reducer, Compression Tube Fitting, Brass, RE Series

      Days to Ship 11 Days or more 11 Days or more
      MaterialBrassBrass
      Surface TreatmentNot ProvidedNot Provided
      Applicable FluidWater / Air / OilWater / Air / Oil
      Max. Operating Pressure3.45 - MPa3.45 - MPa
      Connection TypePipe to Tube Insert, Unequal DiameterPipe to Tube Insert, Unequal Diameter
      Connection ShapeUnionUnion
      Thread Size 1(inch)--
      Thread Size 1(mm)10 ~ 1210 ~ 12
      Connection Thread Type--
      TypesFittingFitting
      Types of Related components--
      Fitting typeFlare FittingsRing Fitting
      Applicable Pipe TypeCopper Pipe (Annealed Copper Pipe)Copper Pipe (Annealed Copper Pipe)
      Applicable Tube Size TypeCopper Pipe inch size / Copper Pipe mm-inch sizeCopper Pipe inch size / Copper Pipe mm-inch size
      Tube MaterialCopperCopper
      Thread Nominal--
      Nominal A 1--
      Nominal 1(inch)1/2 ~ 3/81/2 ~ 3/8
      Applicable Pipe O.D. 1(mm)9.52 ~ 12.79.53 ~ 12.7
      Nominal A 2 [In case of different diameters](mm)--
      Thread Size 2(inch)--
      Thread Size 2(mm)--
      Nominal 2 [In the case of different diameters](inch)5/85/8
      Applicable Pipe O.D. 2 [In the case of different diameters](mm)15.8815.88
      Divisions of Max. Operating Pressure(MPa)than 2.0Mpathan 2.0Mpa

      Loading...

      1. 1

      Application example related to this category

      Related Categories to Fittings for Steel & Copper Pipes