(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Threaded Pipe Fittings & Flanges（Connecting Shape：Nipples）
| Days to Ship |
|
|---|
-
Pipe Fitting - Union, Configurable Length and Tip
MISUMI
Straight type conversion fittings for PT, PF, and NPT threads.
- Volume Discount
- Spec Change
- inCAD Components
Days to Ship: 8 Days or more -
Pipe Fitting - Nipple, Male, Threaded, High Pressure
MISUMI
High Pressure Screw Fittings with Max. Operating Pressure of 20.6MPa
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Pipe Fittings - Reducing Hex Nipple, Male NPT, 304 Stainless Steel, Class 150
USA Industrials
Use Class 150 Reducing Hex Nipple fittings in low-pressure applications. 304 Stainless Steel has very good corrosion resistance.
Days to Ship: 13 Days or more -
316 Stainless Steel Schedule 40 Pipe Nipples (Both Ends Threaded), Male NPT
USA Industrials
Schedule 40 Threaded Pipe Nipples are well suited for low-to-medium pressure applications. 316 Stainless Steel has excellent corrosion resistance.
Days to Ship: 13 Days or more -
304 Stainless Steel Schedule 40 Pipe Nipples (Both Ends Threaded), Male NPT
USA Industrials
Schedule 40 nipples are well suited for low-to-medium pressure applications. 304 Stainless Steel has very good corrosion resistance.
Days to Ship: 13 Days or more -
Hitachi Metals
JIS B 2301. Hot dip galvanizing is an excellent plating with a low environmental load.
[Features]
· Environmentally friendly: Lead and cadmium are greatly reduced.
· Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
· Excellent manufacturing method: New heavy metal addition is not required.
· Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
· Excellent performance: Appearance and performance equivalent to conventional plated parts.
· Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Double Long Nipples (Stainless Steel)
Inoc
• For water, oil, and gas.
For complete product overview and details on Double Long Nipple - Stainless Steel see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Fuji Special
Various NPT screw fittings that conform to of America pipe taper screw standard standards are available with fast delivery dates. Converters for JIS standard PT screws also available. (NPTXPTN/NPTXPTS)
- Volume Discount
Days to Ship: 8 Days or more -
Pipe Fitting - Hex Union, Male, Threaded, Low Pressure
MISUMI
•Material : 304 Stainless Steel, 316 Stainless Steel, FCMB270
•Connection Type : Thread <-> Thread, Equal Dia., Different
•Connecting Shape : Hex Nipple
•Connection Thread Type M1 : R
For complete product overview and details on Hexagon Nipple Low Pressure Pipe Fitting (MISUMI) see the sections below:- Volume Discount
- Spec Change
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Fuji Special
Various fittings of the NPT screws of the taper screw standard for American pipes are available with rapid delivery. Conversion products of JIS standard PT screws are also available. (NPTXPTN/NPTXPTS)
- Volume Discount
Days to Ship: 8 Days or more -
Pipe Fittings - Hex Nipple, Male NPT, 304 Stainless Steel, Class 150
USA Industrials
Use Class 150 Hex Nipple Pipe fittings in low-pressure applications. 304 Stainless Steel has very good corrosion resistance.
Days to Ship: 81 Days or more -
High-Pressure Pipe Fittings, Screw-in Type Pipe Fittings, SNP Nipple
Ihara Science
For medium and high-pressure piping with general-purpose hydraulic pressure. Supports schedule pipes.
- Volume Discount
Days to Ship: 8 Days or more -
Pipe Nipples - Schedule 40 Pipe Nipples (Both Ends Threaded), Male NPT, Aluminum
USA Industrials
Pipe Nipples that are Schedule 40 are well suited for low-to-medium pressure applications. Aluminum has good corrosion resistance and is lightweight.
- CAD ：
- 3D
Days to Ship: 13 Days or more -
304 Stainless Steel Schedule 80 Pipe Nipples (Both Ends Threaded), Male NPT
USA Industrials
Schedule 80 nipples have thick sidewalls, making these well suited for high-pressure applications. 304 Stainless Steel has very good corrosion resistance.
Days to Ship: 13 Days or more -
316 Stainless Steel Schedule 40 Pipe Nipples (One End Threaded) w/ Thread Sealant, Male NPT
USA Industrials
The male threads on these fittings have a pre-applied PTFE thread sealant for extra leak protection. Schedule 40 nipples are well suited for low-to-medium pressure applications. 316 Stainless Steel has excellent corrosion resistance.
Days to Ship: 13 Days or more -
304 Stainless Steel Schedule 40 Pipe Nipples (One End Threaded), Male NPT
USA Industrials
Schedule 40 Nipple Pipe Fittings are well suited for low-to-medium pressure applications. 304 Stainless Steel has very good corrosion resistance.
Days to Ship: 13 Days or more -
Threaded Pipe Fittings on Both The Long Nipples- From Flobal
Flobal
[Features]· Supports stainless steel piping.· New fitting products developed for easier use by further upgrading of conventional threaded fitting.
- Volume Discount
Days to Ship: 8 Days or more -
316 Stainless Steel Schedule 40 Pipe Nipples (Both Ends Threaded) w/ Thread Sealant, Male NPT
USA Industrials
The male threads on these Pipe Nipple Pipe fittings have a pre-applied PTFE thread sealant for extra leak protection. Schedule 40 nipples are well suited for low-to-medium pressure applications. 316 Stainless Steel has excellent corrosion resistance.
Days to Ship: 13 Days or more -
304 Stainless Steel Schedule 40 Pipe Nipples (Both Ends Threaded) w/ Thread Sealant, Male NPT
USA Industrials
The male threads on these Threaded Pipe Nipples fittings have a pre-applied PTFE thread sealant for extra leak protection. Schedule 40 nipples are well suited for low-to-medium pressure applications. 304 Stainless Steel has very good corrosion resistance.
Days to Ship: 13 Days or more -
Pipe Fittings w/ Thread Sealant - Hex Nipple Plug, Male NPT, 304 Stainless Steel Class 150
USA Industrials
The male threads on these Hex Nipple pipe fittings have a pre-applied PTFE thread sealant for extra leak protection. Use Class 150 fittings in low-pressure applications. 304 Stainless Steel has very good corrosion resistance.
Days to Ship: 81 Days or more -
Pipe Fitting - Union, Long, Male, Threaded, Low Pressure
MISUMI
•Material : 304 Stainless Steel, SGP
•Connection Type : Thread <-> Thread, Equal Dia., Different
•Connecting Shape : Both Long Nipple
•Connection Thread Type M1 : R
For complete product overview and details on Long Nipple Low Pressure Pipe Fitting (MISUMI) see the sections below:- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Pipe Fitting - Union, Thread Sealing Tape, Male, Threaded, Low Pressure
MISUMI
Thread Coated Screw Fittings
For complete product overview and details on Pipe Fitting - Union, Thread Sealing Tape, Male, Threaded, Low Pressure see the sections below:- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Steel Pipe Fitting - Hex Union Adapter, Brass, Male, Threaded
MISUMI
Low Pressure Screw Fittings excellent in corrosion resistance
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Hitachi Metals
Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.
- Volume Discount
Days to Ship: 9 Days or more -
Stainless Steel Screw-in Pipe Fitting, One Sided Long Nipple NSL
O.N. Industries
•Material : 304 Stainless Steel
•Connection Type : Thread <-> Steel Pipe
•Connecting Shape : Single Nipples
•Connection Thread Type M1 : R
For complete product overview and details on One-Sided Long Nipple Pipe Fitting - Threaded, Stainless Steel, NSL Series (O.N. Industries) see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
High-Pressure Pipe Fittings, Screw-in Type Pipe Fittings, SRN Differing Diameter Nipple
Ihara Science
A fitting for medium-pressure and high-pressure piping with general hydraulic pressures. Compatible with pipe schedules.
- Volume Discount
Days to Ship: 8 Days or more -
CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Nipple
CK Metals
•Material : Cast Iron
•Connection Type : Thread <-> Thread, Equal Dia., Different
•Connecting Shape : Nipples
•Connection Thread Type M1 : R
For complete product overview and details on Nipple Fitting for Galvanized Cast Iron Pipe - Threaded (CK Metals) see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
CK Pre-Seal SUS Fitting Hexagon Nipple
CK Metals
[*This product is found in the pre-seal series, but be aware that it does not have a seal]
· The latest CK metal product comprises a stainless steel fitting with sealing material. It solves such problems as galling in stainless steel screw-in fittings, sealing material contamination, and leaks. The definitive stainless steel fitting series, used in all sectors related to food, medical, and precision parts. No longer a need to apply sealant. Also drastically reduces the need for re-piping and repairs- Volume Discount
Days to Ship: 8 Days or more -
USA Industrials
Close Pipe Nipples with male threads on these fittings have a pre-applied PTFE thread sealant for extra leak protection. Schedule 40 nipples are well suited for low-to-medium pressure applications. Aluminum has good corrosion resistance and is lightweight.
Days to Ship: 81 Days or more -
304 Stainless Steel Schedule 40 Pipe Nipples (One End Threaded) w/ Thread Sealant, Male NPT
USA Industrials
The male threads on these Nipple Pipe fittings have a pre-applied PTFE thread sealant for extra leak protection. Schedule 40 nipples are well suited for low-to-medium pressure applications. 304 Stainless Steel has very good corrosion resistance.
Days to Ship: 13 Days or more -
316 Stainless Steel Schedule 40 Close Pipe Nipples, Male NPT
USA Industrials
Schedule 40 Close Pipe Nipples are well suited for low-to-medium pressure applications. 316 Stainless Steel has excellent corrosion resistance.
Days to Ship: 13 Days or more -
Pipe Fitting - Union Adapter, Male, Threaded, High Pressure
MISUMI
High Pressure Screw Fittings with Max. Operating Pressure of 20.6MPa
- Volume Discount
- Spec Change
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Pipe Fitting - Union, Male, Threaded, Low Pressure
MISUMI
•Material : 304 Stainless Steel, SGP
•Connection Type : Thread <-> Thread, Equal Dia., Different
•Connecting Shape : Round Nipple
•Connection Thread Type M1 : R
For complete product overview and details on Nipple Low Pressure Pipe Fitting (MISUMI) see the sections below:- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Pipe Fitting - Union, Configurable Tip
MISUMI
Fittings allowing to extend the fitting length.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Pipe Fitting - Union Adapter, Male, Threaded, Low Pressure
MISUMI
•Material : 304 Stainless Steel, 316 Stainless Steel
•Connection Type : Thread <-> Thread, Unequal Dia.
•Connecting Shape : Hex Nipple
•Connection Thread Type M1 : R
For complete product overview and details on Reducing Nipple Low Pressure Pipe Fitting (MISUMI see the sections below:- Volume Discount
- Spec Change
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Stainless Steel Long Nipple Fitting, Threaded
Kitz
A screw-in fitting made of SUS304TP.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
High Pressure Screw-in Fitting PT N/Hexagonal Nipple
Fuji Special
[Features]
- Screw-in type (PT)- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Days to Ship: 8 Days or more -
Stainless Steel Threaded Fitting Long Nipple NL
O.N. Industries
A stainless steel, threaded, double end long nipple fitting—manufactured by ONK Co., Ltd., with a proven track record in Japan, offering a large selection of JIS standard fittings/pipe components.
· Material: stainless steel
· Working fluid: water, air, oil- Volume Discount
Days to Ship: 8 Days or more -
Pipe Nipples w/ Thread Sealant - Schedule 40 Pipe Nipples (Both Ends Threaded), Male NPT, Aluminum
USA Industrials
Pipe Nipples have male threads on these fittings and have a pre-applied PTFE thread sealant for extra leak protection. Schedule 40 nipples are well suited for low-to-medium pressure applications. Aluminum has good corrosion resistance and is lightweight.
Days to Ship: 13 Days or more -
316 Stainless Steel Schedule 80 Pipe Nipples (Both Ends Threaded), Male NPT
USA Industrials
Schedule 80 nipples have thick sidewalls, making these well suited for high-pressure applications. 316 Stainless Steel has excellent corrosion resistance.
Days to Ship: 13 Days or more -
316 Stainless Steel Schedule 80 Close Pipe Nipples, Male NPT
USA Industrials
Schedule 80 nipples have thick sidewalls, making these well suited for high-pressure applications. 316 Stainless Steel has excellent corrosion resistance.
Days to Ship: 13 Days or more -
Galvanized Steel Reducing Hex Nipple Instrumentation Pipe Fittings w/ Thread Sealant, Male NPT
USA Industrials
The male threads on these Hex Nipple fittings have a pre-applied PTFE thread sealant for extra leak protection. Instrumentation fittings are machined to an exceptional tolerance level with rolled threads for increased strength. Use these fittings in extreme-pressure applications. Galvanized steel has good strength and fair corrosion resistance.
Days to Ship: 81 Days -
Galvanized Steel Hex Nipple Instrumentation Pipe Fittings, Male NPT
USA Industrials
Hex Nipple Instrumentation fittings are machined to an exceptional tolerance level with rolled threads for increased strength. Use these fittings in extreme-pressure applications. Galvanized steel has good strength and fair corrosion resistance.
- CAD ：
- 3D
Days to Ship: 13 Days or more -
Instrumentation Pipe Fittings w/ Thread Sealant - Reducing Nipple, Male NPT, 316 Stainless Steel
USA Industrials
Reducing Nipple Instrumentation fittings are machined to an exceptional tolerance level with rolled threads for increased strength. Use these fittings in extreme-pressure applications. 316 Stainless Steel has excellent corrosion resistance.
Days to Ship: 13 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Material |
| Max. Operating Pressure(MPa) |
| Connection Type |
| Connecting Shape |
| Types of Screw 3 (When Different Dia. or Different Type Screw) |
| Connection Thread Type M1 |
| Nominal of Thread 3(Different Diameters or Different Type Screw) |
| Connection Thread Type M2 |
| Types of Screw 4 (When Different Dia. or Different Type Screw) |
| Thread Nominal M1 |
| Nominal of Thread 4(Different Diameters or Different Type Screw) |
| Thread Nominal M2 |
| Surface Treatment |
| Applicable Fluid |
| Divisions of Max. Operating Pressure |
| Type |
| Types of Related components |
| Interior Resin Lining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | USA Industrials | USA Industrials | USA Industrials | Hitachi Metals | Inoc | Fuji Special | MISUMI | Fuji Special | USA Industrials | Ihara Science | USA Industrials | USA Industrials | USA Industrials | USA Industrials | Flobal | USA Industrials | USA Industrials | USA Industrials | MISUMI | MISUMI | MISUMI | Hitachi Metals | O.N. Industries | Ihara Science | CK Metals | CK Metals | USA Industrials | USA Industrials | USA Industrials | MISUMI | MISUMI | MISUMI | MISUMI | Kitz | Fuji Special | Kurita | O.N. Industries | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials |
| Product Series | Pipe Fittings - Reducing Hex Nipple, Male NPT, 304 Stainless Steel, Class 150 | 316 Stainless Steel Schedule 40 Pipe Nipples (Both Ends Threaded), Male NPT | 304 Stainless Steel Schedule 40 Pipe Nipples (Both Ends Threaded), Male NPT | Pipe Fittings - Hex Nipple, Male NPT, 304 Stainless Steel, Class 150 | High-Pressure Pipe Fittings, Screw-in Type Pipe Fittings, SNP Nipple | Pipe Nipples - Schedule 40 Pipe Nipples (Both Ends Threaded), Male NPT, Aluminum | 304 Stainless Steel Schedule 80 Pipe Nipples (Both Ends Threaded), Male NPT | 316 Stainless Steel Schedule 40 Pipe Nipples (One End Threaded) w/ Thread Sealant, Male NPT | 304 Stainless Steel Schedule 40 Pipe Nipples (One End Threaded), Male NPT | Threaded Pipe Fittings on Both The Long Nipples- From Flobal | 316 Stainless Steel Schedule 40 Pipe Nipples (Both Ends Threaded) w/ Thread Sealant, Male NPT | 304 Stainless Steel Schedule 40 Pipe Nipples (Both Ends Threaded) w/ Thread Sealant, Male NPT | Pipe Fittings w/ Thread Sealant - Hex Nipple Plug, Male NPT, 304 Stainless Steel Class 150 | Pipe Fitting - Union, Thread Sealing Tape, Male, Threaded, Low Pressure | Steel Pipe Fitting - Hex Union Adapter, Brass, Male, Threaded | Stainless Steel Screw-in Pipe Fitting, One Sided Long Nipple NSL | High-Pressure Pipe Fittings, Screw-in Type Pipe Fittings, SRN Differing Diameter Nipple | CK Fittings - Screw-in Type Malleable Cast Iron Pipe Fitting - Nipple | 304 Stainless Steel Schedule 40 Pipe Nipples (One End Threaded) w/ Thread Sealant, Male NPT | 316 Stainless Steel Schedule 40 Close Pipe Nipples, Male NPT | Pipe Nipples w/ Thread Sealant - Schedule 40 Pipe Nipples (Both Ends Threaded), Male NPT, Aluminum | 316 Stainless Steel Schedule 80 Pipe Nipples (Both Ends Threaded), Male NPT | 316 Stainless Steel Schedule 80 Close Pipe Nipples, Male NPT | Galvanized Steel Reducing Hex Nipple Instrumentation Pipe Fittings w/ Thread Sealant, Male NPT | Galvanized Steel Hex Nipple Instrumentation Pipe Fittings, Male NPT | Instrumentation Pipe Fittings w/ Thread Sealant - Reducing Nipple, Male NPT, 316 Stainless Steel | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more |
Same day or more
Show Stock Products | 13 Days or more | 13 Days or more | 13 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 81 Days or more | 8 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 8 Days or more | 13 Days or more | 13 Days or more | 81 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 81 Days or more | 13 Days or more | 13 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 81 Days | 13 Days or more | 13 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
| Material | Stainless Steel / Steel / Brass | Stainless Steel / Steel | Stainless Steel | Stainless Steel | Stainless Steel | Cast Iron | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel | Steel | Aluminum | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Brass | Steel | Stainless Steel | Steel | Cast Iron | Stainless Steel | Aluminum | Stainless Steel | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel | Stainless Steel | Stainless Steel / Steel | Brass | Stainless Steel | Aluminum | Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel |
| Max. Operating Pressure(MPa) | 20.6 | 20.6 | 1.034 | 1.034 | 1.034 | 2.5 | - | 12 | 2 | 12 | 1.034 | - | 1.034 | 20.69 | 1.034 | 1.034 | 1 | 1.034 | 1.034 | 1.034 | 2 | 2 | 6.9 | 13.8 | 2 | - | 2.5 | 2 | 1.034 | 1.034 | 1.034 | 20.6 | 2 | 20.6 | 2 | 2 | 12 | - | 2 | 1.034 | 20.69 | 20.69 | 53.103 ～ 68.966 | - | - |
| Connection Type | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia. | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. / Thread <-> Steel Pipe | Thread <-> Steel Pipe | Thread <-> Steel Pipe | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Thread <-> Steel Pipe | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Steel Pipe | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Steel Pipe | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. | Thread <-> Thread, Unequal Dia. |
| Connecting Shape | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples | Nipples |
| Types of Screw 3 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Thread Type M1 | PT / NPT / G | R | NPT | NPT | NPT | R | R | G | R | G | NPT | R | NPT | NPT | NPT | NPT | R | NPT | NPT | NPT | R | R | R | R | R | R | R | R | NPT | NPT | NPT | R | R | R / NPT / M | R | R | R | Rp(Ps) | R | NPT | NPT | NPT | NPT | NPT | NPT |
| Nominal of Thread 3(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Thread Type M2 | PT / NPT / G / M | - | NPT | NPT | NPT | R | - | - | - | - | NPT | - | NPT | NPT | Other | Other | - | NPT | NPT | NPT | - | - | R | - | - | R | - | - | NPT | Other | NPT | R | - | R / M | R | - | - | Rp(Ps) | - | NPT | NPT | NPT | NPT | NPT | NPT |
| Types of Screw 4 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Nominal M1 | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / M5 | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) |
| Nominal of Thread 4(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Nominal M2 | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / M5 | - | 1/8B(6A) / 1/4B(8A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | - | - | - | - | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | - | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | - | - | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) | - | - | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1 1/4B(32A) | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | - | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / M5 | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | - | - | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) |
| Surface Treatment | Not Provided / Nickel Plating | Not Provided | - | - | - | Not Provided / Zinc Plating | Not Provided | Not Provided | Not Provided / Zinc Plating | Not Provided | - | - | - | - | - | - | Not Provided | - | - | - | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided | Zinc Plating | Not Provided | - | Not Provided / Zinc Plating / Resin Coating | Not Provided | - | - | - | Not Provided | Not Provided / Zinc Plating | Not Provided / Nickel Plating / Black Oxide Coating | Not Provided | Not Provided | Not Provided | Not Provided / Chrome Plating | Not Provided | - | - | - | - | - | - |
| Applicable Fluid | Water / Air | Water / Air / Steam / Gas / Oil | - | - | - | Water / Air / Steam / Gas / Oil | Water / Gas / Oil | Water / Steam / Oil | Water / Air / Steam / Gas / Oil | Water / Steam / Oil | - | Oil | - | - | - | - | Air / Steam / Gas / Oil | - | - | - | Water / Air / Steam / Gas / Oil | Water / Air / Gas / Oil | Water / Air | Water / Air / Steam / Gas / Oil | Water / Air / Oil | Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Oil | - | - | - | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air | - | Water / Air / Steam / Gas / Oil | Water / Steam / Oil | Air | Water / Air / Oil | - | - | - | - | - | - |
| Divisions of Max. Operating Pressure | - | - | - | - | - | than 2.0Mpa | - | than 2.0Mpa | - | than 2.0Mpa | - | - | - | - | - | - | 1.0Mpa or Less | - | - | - | - | - | - | than 2.0Mpa | 2.0Mpa or Less | - | than 2.0Mpa | 2.0Mpa or Less | - | - | - | - | - | - | - | 2.0Mpa or Less | than 2.0Mpa | - | 2.0Mpa or Less | - | - | - | - | - | - |
| Type | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting |
| Types of Related components | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Interior Resin Lining | - | - | - | - | - | No | No | No | - | No | - | No | - | - | - | - | No | - | - | - | - | - | - | No | No | No | No | No | - | - | - | - | - | - | - | No | No | No | No | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Resin
- Bronze
- Cast Iron
-
Metric / Inch
- metric
-
Max. Operating Pressure(MPa)
- 0.35
- 0.69
- 0.7
- 0.99
- 1
- 1.034
- 1.37
- 1.39
- 1.4
- 1.65
- 2
- 2.5
- 3.45
- 4
- 6.9
- 7
- 10
- 12
- 13.793
- 13.8
- 14
- 14.483
- 15.862
- 17.241
- 18.621
- 20
- 20.6
- 20.69
- 21
- 21.379
- 22.069
- 23.448
- 24.138
- 24.828
- 26.207
- 26.897
- 27.586
- 28.276
- 29.655
- 31.034
- 31.724
- 33.793
- 34.483
- 35.172
- 35.862
- 36.552
- 37.931
- 38.621
- 40
- 41.379
- 42.759
- 44.138
- 45.517
- 48.276
- 49.655
- 50.345
- 51.724
- 52.414
- 53.103
- 53.793
- 55.172
- 62.759
- 66.897
- 68.966
-
Connection Type
- Thread <-> Thread, Equal Dia.
- Thread <-> Thread, Equal Dia., Different
- Thread <-> Thread, Unequal Dia.
- Thread <-> Steel Pipe
- Thread (Terminal)
- Flanged
- Steel pipe ⇔ Steel pipe diameter identical diameter
- Thread <-> Thread, Equal Dia.
-
Connecting Shape
-
Types of Screw 3 (When Different Dia. or Different Type Screw)
-
Connection Thread Type M1
-
Nominal of Thread 3(Different Diameters or Different Type Screw)
-
Connection Thread Type M2
-
Types of Screw 4 (When Different Dia. or Different Type Screw)
-
Thread Nominal M1
-
Nominal of Thread 4(Different Diameters or Different Type Screw)
-
Thread Nominal M2
-
Surface Treatment
- Not Provided
- Trivalent Chromate
- Chrome Plating
- Nickel Plating
- Zinc Plating
- Black Oxide Coating
- Painted
- Resin Coating
- Others1
- Zinc Electroplating
-
Applicable Fluid
- Water
- Air
- Steam
- Gas
- Chemical
- Oil
- Not specified by Manufacturer
-
Divisions of Max. Operating Pressure
- 1.0Mpa or Less
- 2.0Mpa or Less
- than 2.0Mpa
- 3.0 MPa to 5.0 MPa
- 5.0 MPa to 10.0 MPa
-
Type
- Fitting
- Related Products
-
Types of Related components
- Valve
- Nut
- Gasket
-
Interior Resin Lining
- Presence
- No
Narrow search by specifying Manufacturer
-
- USA Industrials (44)
- O.N. Industries (6)
- Fuji Special (5)
- CK Metals (4)
- Inoc (4)
- Kitz (4)
- Asoh (3)
- Hitachi Metals (3)
- Ihara Science (2)
- Koyo (2)
- Flobal (1)
- Kurita (1)
- NBK (0)
- Yodoshi (0)
- SVF (0)
- Yamato Sangyo (0)
- Trusco Nakayama (0)
- Yamato Special Steel (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy