(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Tubes & Tube Accessories（I.D. [Distinction]：~4）
| Days to Ship |
|
|---|
-
Polyurethane Coil Tubing TCU Series【1-5 Pieces Per Package】
SMC
Flexible tubing that can be used for compact piping.
[Features]
· Flexible.
· Makes compact piping possible.
· Fluid: air.
· Maximum operating pressure: 0.8 MPa or less (at 20°C).
[Applications]
· For piping in movable parts.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Polyurethane Tubing TU/TIUB Series
SMC
Flexible polyurethane tubing.
[Features]
· Flexible.
· Polyurethane tubing.
· Additional 21 new colors.
[Applications]
· For general pneumatic tubing.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Soft Nylon Tubing TS/TISA Series
SMC
Pliable soft nylon tubing.
[Features]
· Maximum operating pressure 1.0 MPa or less (at 20°C).
[Applications]
· For general pneumatic tubing.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Flame-Resistant (Equivalent To UL-94 Standard V-0) FR Three-Layer Polyurethane Tubing, TRTU Series
SMC
Triple-layered, flame-resistant (equivalent to UL-94 standard V-0) polyurethane tubing, TRTU series.
[Features]
· Includes an aluminum layer between the outer sheath and the inner tube for improved spatter resistance.
[Applications]
· Suitable for air and water piping in environments with sparks from arc welders, etc.- Volume Discount
Days to Ship: 3 Days or more -
Wear Resistant Tubing TUZ Series
SMC
SMC's wear-resistant tubing.
[Features]
· Abrasion: approx. 1/3.
· Color: black, translucent white.
· Fluid: air, water.- Volume Discount
Days to Ship: 3 Days or more Show Stock Products
-
Fluoropolymer Tubing (PFA) Metric Size, TLM Series
SMC
Superior heat resistance: fluoropolymer tubing (PFA) metric size, TLM series.
[Features]
· Uses highly chemical-resistant fluoropolymer.
[Applications]
· Used in the manufacture of solar cells, liquid crystals, hard disk drives, and in the healthcare and food industries.- Volume Discount
Days to Ship: Quote Show Stock Products
-
Soft Polyurethane Tubing TUS Series
SMC
Extremely flexible soft polyurethane tubing.
[Features]
· Suitable for piping in confined spaces.
· Maximum operating pressure 0.6 MPa or less (at 20°C).- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Polyurethane Flat Tubing TFU Series
SMC
Polyurethane flat tubing that makes compact piping possible.
[Features]
· Makes compact piping possible.
· With line markings for piping differentiation.
· Maximum operating pressure 0.8 MPa or less (at 20°C).
· Fluid: air.- Volume Discount
Days to Ship: Quote Show Stock Products
-
Clean Tubing: Soft Polyolefin Tubing TPS Series
SMC
Clean tubing: soft polyolefin tubing in a variety of colors.
[Features]
· Maximum operating pressure 0.7 MPa (at 20°C).
[Applications]
· Fluid: Air, nitrogen gas, water, DI water (pure water).- Volume Discount
Days to Ship: Quote -
Soft Fluoropolymer Tubing TD/TID Series
SMC
Compatible with Japan's Food Sanitation Law.
[Features]
· Flexibility: Improved by approx. 20%.
· Operating temperature: Max. 260°C.
[Applications]
· Suitable for applications which require flexibility.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Fluoropolymer Tubing (FEP) TH/TIH Series
SMC
A fluoropolymer tubing with superior durability in chemical environments.
[Features]
· Compatible with Japan's Food Sanitation Law.
· Operating temperature: 200°C (varies depending on the conditions).
· Maximum operating pressure 2.3 MPa or less (at 20°C) (varies by size).
· Complies with the FDA (Food and Drug Administration) §177-1550 dissolution test.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Fluoropolymer Tubing (PFA) Inch Size, TILM Series
SMC
Fluoropolymer tubing (PFA) with superior heat resistance, inch size, TILM series.
[Features]
· Uses highly chemical-resistant fluoropolymer.
[Applications]
· Used in manufacturing of solar cells, liquid crystals, hard disk drives, and in the health care and food industries.- Volume Discount
Days to Ship: Quote -
Hard Polyurethane Tubing TUH Series
SMC
Polyurethane tubing with superior resiliency even when compared to nylon tubing.
[Features]
· Fluid: air.
· Available in 2 types: standard and high pressure.
· Colors: black, translucent white, blue, translucent.
· Superior resiliency.- Volume Discount
Days to Ship: Quote -
SMC
Tubing to which measures against static electricity have been applied.
[Features]
· Maximum operating pressure 1.2 MPa or less (at 20°C).
· For pneumatic piping and applications which require measures against static electricity.
· Flame-retardant tubing (equivalent to UL-94 standard V-0).
· Fluid: air.
· Color: black.
[Applications]
· For preventing static electricity.- Volume Discount
Days to Ship: 3 Days or more -
Clean Tubing, Polyolefin Tubing, TPH Series (20 m / 100 m)
SMC
A RoHS-compliant clean tube.
[Features]
· Applicable fittings: clean one-touch fitting, metal one-touch fitting KQB2 Series.
· Applicable fittings: SUS316 one-touch fittings KQG2 series, insert fittings.
· Colors: white (material color) / black (opaque) / red (opaque) / blue (opaque) / yellow (opaque) / green (opaque).
· Length: 20 m roll / 100 m roll.- Volume Discount
Days to Ship: Quote -
2-Layer Soft Fluoropolymer Tubing TQ Series
SMC
Tubing with a 2-layer structure.
[Features]
· Fluids such as solvents are transferred by flexible piping with superior abrasion resistance.
· Wearing of outer layer tube: Reduced to 1/30.
· Flexibility: Improved by up to 55% (*1). * 1: Compared with SMC Fluoropolymer Tubing / TL (ø6 [6‑mm diameter] × ø4 [4‑mm diameter]).
[Applications]
· Semiconductors, food, medical, machine tools.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Polyurethane Tubing 10-TU Series
SMC
Flexible polyurethane tubing.
[Features]
· Flexible. 0.8 MPa or less type (at 20°C).
· Polyurethane tubing.
[Applications]
· For general pneumatic tubing.- Volume Discount
Days to Ship: Quote -
Tubing - Nylon, Multipurpose, N2 Series
Nitta
This nylon tube N2 features excellent oil resistance, chemical resistance, and abrasion resistance. The group 2 type can be used at a maximum of 4.8 Mpa (at 20°C).
[Features]
· Product features superior oil resistance and chemical resistance properties.
· The group 2 type can be used at a maximum of 4
· .8 Mpa (at 20°C).
· Product features superior abrasion resistance- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Nylon, Soft, Straight, General Use, NB Series
Nihon Pisco
A tube that can be used in hot water and thermal oil.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Tubing - Polyurethane, Touch Coil, TPS Series
Chiyoda
A spiral tube with superior flexibility.
[Features]
· A feature of the TE tube is that inherited one touch fittings can be used as-is.
· Special orders are possible.- Volume Discount
Days to Ship: 8 Days or more -
SMC
Nylon tubing for general pneumatic tubing.
[Features]
· Maximum operating pressure 3.0 MPa or less (T0604, at 20°C).
[Applications]
· Fluid: air, water.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Tubing - Polyurethane, UB Series
Nihon Pisco
Urethane tube with superior flexibility.
[Features]
· Excellent flexibility.
· Ideal for general pressure pipes that need a small bend radius.
· Many tube colors.
· A cut mark is displayed at intervals of 500mm, which is useful when cutting the tube.
· We also manufacture long length tubes by custom order.- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Tubing - Fluoropolymer, Nylon Outer Layer, Flexible, Double Layer, Abrasion Resistant, TES Series
Nitta
Two-layer structure consisting of inside layer (special fluororesin) + outer layer (special nylon resin). Excellent in flexibility and suitable for movable piping such as robots. Semi-transparent, so fluids can be visually checked.
- Volume Discount
Days to Ship: 26 Days or more -
Tubing - Polyurethane, for Air, U2 Series
Nitta
Urethane Tube - The U2 delivers a good balance between flexibility and pressure resistance. The excellent construction makes it suitable for general air pressure piping.
- Volume Discount
Days to Ship: 8 Days or more -
Nitta
A tube made of PFA resin, which has superb chemical resistance. The tube is easily washable and allows minimum fluid adhesion. · Manufactured in a clean room, the tube ends are sealed with caps and shipped in heat-sealed packaging.
- Volume Discount
Days to Ship: 8 Days or more -
Junkosha
By using a double tube with overlapped special resins that are flame resistant, sparks can be prevented. High flexibility, with excellent weather and water resistance.
[Features]
▪ Standard colors: black, red, blue, green, white, yellow, light beige, light red, light green (yellow, light beige, light red, light green with a 100-m roll only).
▪ The equipment can be implemented as a piping tube of spot welded equipment where noncombustible resin (exact UL94V-0) is used in the outer layer.
▪ By using the exclusively applied stripper (that comes with tube cutter), it is possible to insert the equipment into the Junlon one-touch fitting W series and it is also possible to detach the speedy outer layer that complies with the infixing.
▪ Moreover, the pitch of the infixing in the outer layer is displayed and the length of its detachment is easily visible.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Coil, General Use, 2 Core, ULF Series
Nihon Pisco
A 2-core coiling tube for general-purpose piping.
- Volume Discount
Days to Ship: 14 Days or more -
Tubing - PFA, Corrosion Resistant, SFT Series
Nihon Pisco
Excellent chemical/heat resistance and weatherproofing. * Tube can be cut.
- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Touch Tube, TP Series
Chiyoda
Polyurethane tube with superior flexibility that achieves small bending radius.
[Features]
· Soft and difficult to break: superior flexibility, very small bending radius.
· Excellent oil resistance: Suitable for air piping in a plant.
· Excellent wear resistance: superior mechanical strength and wear resistance, optimal for equipment piping and robot piping, superior outer diameter accuracy.
· Cut marks and model view: cut marks printed at 1 m intervals; optimal for cutting work and inventory control- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Multi-Coil, 2-MPS/3-MPS Series
Chiyoda
Colorful spiral tube with excellent flexibility.
[Features]
· Directly inherited the features of the TP tube.
· One-touch fittings can be used.
· Can be made to order- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Flame-Retardant Polymer, for Spot Welding, FS Series
Nitta
Flame retardant tube FS has excellent self-extinguishing capabilities corresponding to UL94 Standard V-0. Excellent flexibility due to single layer structure. Marking is added to total length for indicating insert length.
- Volume Discount
Days to Ship: 10 Days or more -
Tubing - Polyolefin, Flexible, Clean Tubing, PL Series
Nitta
[Features]
· A clean tube suitable for equipment and applications with fluids such as clean air, N2 gas, pure water, and various chemicals fluids.
· Environmentally friendly eco-type tube.
· Only carbon dioxide generated when it is incinerated (750°C); no toxic gases such as nitrogen oxides (Nox) and sulfur oxides (Sox) are produced. No dioxin is generated at all.
· Manufactured in a clean room. Tube ends are capped and sealed. Shipped in heat-sealed packaging.
· Special polyolefin resin with high water barrier performance and flexibility.
· Low cost compared to fluorocarbon resin tubes.
· Compliant with the MHLW Ministerial Notification No. 201 (2006), MHW Ministerial Notification No. 370 (1959), Japan.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Nylon, Soft, Junron A, AS1 Series, Metric
Junkosha
[Features]
· Excellent mechanical strengths (especially, pressure resistance, wear resistance and bending fatigue tolerance).
· Product has superior low temperature and heat resistance properties.
· Highly flexible.
· Product has superior oil resistance and chemical resistance properties (especially alkali resistance).
▪ No risk of toxic substances being released.
▪ It is light in weight and has excellent workability- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, for Clean Room Applications, UB Series
Nihon Pisco
A tube for clean rooms (equivalent to ISO Class 6).
- Volume Discount
Days to Ship: 6 Days or more -
Tubing - Polyurethane, Cable and Hose Protection, UBS Series
Nihon Pisco
The friction coefficient of the tube material is low, with scraping in the guide device and cable and hose protection, in order to prevent damage.
[Features]
•Excellent flexibility, ideal for compact piping requiring a small bending radius.
•Friction coefficient is 1/3rd of the polyurethane tube (UB).
•Tube available in a wide range of colors.
•Cut marks are displayed at intervals of 500 mm, which is useful when cutting the tube.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, UBT Series
Nihon Pisco
A urethane foam tube with mechanical strength and excellent oil resistance.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Tubing - Polyurethane, Polyolefin Outer Layer, L-Flex, Weld-Spatter-Resistant, LE Series
Chiyoda
A tube featuring sputtering resistance. Can also be used with air and cooling water.
- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Polyolefin Outer Layer, L-Flex, Weld-Spatter-Resistant, ALE Series
Chiyoda
A tube with a 3-layered structure. Features the best specifications among Chiyoda Tsusho’s tubes for sputtering.
- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Ultra Flexible, for Air, U5 Series
Nitta
[Features]
▪ Among all urethane tubes, the U5 urethane tube has the least bending stress and excellent workability.
▪ Since ether-based polyurethane resin is used, there is less erosion and deformation caused by moisture and mold at high temperature and humidity.
▪Barb fittings (bamboo shoot joints) can be used.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Nylon, Soft, Flexible, N5 Series
Nitta
Nylon tube N5 has excellent abrasion resistance and is the most flexible of the nylon tubes. · This tube also offers superior oil resistance and chemical resistance.
[Features]
· Most flexible of the nylon tubes.
·Superior abrasion resistance.
·Superior oil resistance and chemical resistance- Volume Discount
Days to Ship: 8 Days or more -
Nichias
Fluororesin (PTFE) tube. Excellent chemical resistance, heat resistance, and weatherproof performance.
[Features]
· Chemical permeation is minimal (reduced to approximately 60% of PFA-HG (measured with hydrochloric acid, nitrogen, and oxygen)).
· The amount of permeation for a PFA-HG tube is reduced to approximately 50% that of a standard PFA tube (HCl comparison).
· Elution of fluorine ions is minimal (equivalent to a PFA-HG tube).
· The inner surface of the tube is smooth (Equivalent to a PFA-HG tube).- Volume Discount
Days to Ship: 10 Days or more -
Tubing - Polyurethane, for Barb Fitting, Junron UF, 25 Series
Junkosha
Mechanical strength, in particular wear resistance is excellent.
[Features]
· Excellent mechanical strengths (especially, pressure resistance and wear resistance).
· Product has superior low temperature and heat resistance properties.
· Temperature range of resin for continuous operation without load: -40°C ~ +80°C.
· Flexible and high impact resilience rate.
· No risk of poisonous substances being released.
· Minimum bending radius. Excellent workability.
· *If you need water resistance, use Junlon UF.- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyamide, Weld-Spatter-Resistant, FB Series
Nihon Pisco
•Type: Straight
•Operating Temperature Range (when using air) (?): -15::90
•Number Of Bores (per piece): 1
•Material: Polyamide
•Color: Gray- Volume Discount
Days to Ship: 8 Days or more -
Tubing - PFA, for Clean Room Applications, SFT Series
Nihon Pisco
A tube for clean rooms (equivalent to ISO Class 6).
- Volume Discount
Days to Ship: 8 Days or more -
Tubing - Polyurethane, Coil, General Use, UL Series
Nihon Pisco
A tube ideal for air guns, pneumatic screwdrivers, etc.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Material |
| Cutting Service Usage |
| Color |
| O.D. [Distinction] |
| Applicable Fluid |
| O.D. D(Ø) |
| I.D. [Distinction] |
| I.D. d(Ø) |
| Number of Bores(per piece) |
| Material, Urethane |
| Material: Nylon |
| Material, Fluororesin |
| Operating Environment |
| O.D. (2nd Core) |
| O.D. (3rd Core) |
| O.D. (4th Core) |
| I.D. (2nd Core) |
| I.D. (3rd Core) |
| I.D. (4th Core) |
| Types of Related components |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | Nitta | Nihon Pisco | Chiyoda | SMC | Nihon Pisco | Nitta | Nitta | Nitta | Junkosha | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Nitta | Nitta | Junkosha | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Nitta | Nitta | Nichias | Junkosha | Nihon Pisco | Nihon Pisco | Nihon Pisco |
| Product Series | Flame-Resistant (Equivalent To UL-94 Standard V-0) FR Three-Layer Polyurethane Tubing, TRTU Series | Tubing - Fluoropolymer, Nylon Outer Layer, Flexible, Double Layer, Abrasion Resistant, TES Series | Tubing - Polyurethane, Coil, General Use, 2 Core, ULF Series | Tubing - Flame-Retardant Polymer, for Spot Welding, FS Series | Tubing - Polyurethane, for Clean Room Applications, UB Series | Tubing - Polyurethane, Cable and Hose Protection, UBS Series | Tubing - Polyurethane, Polyolefin Outer Layer, L-Flex, Weld-Spatter-Resistant, LE Series | Tubing - Polyurethane, Polyolefin Outer Layer, L-Flex, Weld-Spatter-Resistant, ALE Series | Tubing - Polyurethane, for Barb Fitting, Junron UF, 25 Series | ||||||||||||||||||||||||||||||||||||
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 3 Days or more |
3 Days or more
Show Stock Products |
Quote
Show Stock Products |
Same day or more
Show Stock Products |
Quote
Show Stock Products | Quote |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | Quote | Quote | 3 Days or more | Quote |
Same day or more
Show Stock Products | Quote | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 26 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 14 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 6 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
| Type | Coil | Straight | Straight | Straight | Straight | Straight | Straight | Flat | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Coil | Straight | Straight | Straight | Straight | Straight | Straight | Coil | Straight | Straight | Coil | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Coil |
| Material | Urethane | Urethane | Nylon | Urethane | Urethane | Fluororesin | Urethane | Urethane | Polyolefin Resin | Fluororesin | Fluororesin | Fluororesin | Urethane | Urethane / Nylon | Polyolefin Resin | - | Urethane | Nylon | Nylon | Urethane | Nylon | Urethane | Fluororesin | Urethane | Fluororesin | - | Urethane | Fluororesin | Urethane | Urethane | Others | Polyolefin Resin | Nylon | Urethane | Urethane | Urethane | Polyolefin Resin | Polyolefin Resin | Urethane | Nylon | Fluororesin | Urethane | Polyamide | Fluororesin | Urethane |
| Cutting Service Usage | No | No | No | No | No | No | No | No | No | No | No | No | No | No | Yes | No | No | - | - | - | No | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Color | White / Transparent (including non-white colors) / Red / Blue / Yellow / Green / Gray | White / Transparent (including non-white colors) / Red / Blue / Yellow / Green / Orange / Gray / Pink / Brown / Purple / Silver | Transparent (including non-white colors) / Blue / Yellow / Green | White / Transparent (including non-white colors) / Red / Blue / Yellow / Green | White / Translucent White / Red / Blue / Yellow / Green | Transparent (including non-white colors) / Red | Transparent (including non-white colors) / Blue / Yellow / Green | Transparent (including non-white colors) / Blue | Transparent (including non-white colors) / Blue | Transparent (including non-white colors) | Transparent (including non-white colors) / Red | Transparent (including non-white colors) / Red | Translucent White / Transparent (including non-white colors) / Blue | Transparent (including non-white colors) | Transparent (including non-white colors) / Blue | Transparent (including non-white colors) | White | Black / Translucent White / Red / Blue / Yellow / Green | Black / Translucent White / Transparent (including non-white colors) / Red / Blue / Yellow | Black | Transparent (including non-white colors) / Blue / Yellow / Green | Black / Translucent White / Transparent (including non-white colors) / Red / Blue / Yellow / Green / Orange / Ocher | Transparent (including non-white colors) | Black / White / Transparent (including non-white colors) / Red / Blue / Yellow / Green | Transparent (including non-white colors) | Black / White / Red / Blue / Yellow / Green / Others | Multi Color | Transparent (including non-white colors) | Black / White / Transparent (including non-white colors) / Red / Blue / Yellow / Green | Multi Color | Black / White / Yellow | Black / Translucent White / Blue / Yellow | Black / Translucent White / Red / Blue / Yellow / Green | Transparent (including non-white colors) | Black / Translucent White / Blue / Yellow / Green | Black / Transparent (including non-white colors) | Black / White / Red / Blue / Yellow / Green | Black / White / Red / Blue / Yellow / Green | Black / Transparent (including non-white colors) | Black / Translucent White / Red / Blue / Yellow | Transparent (including non-white colors) | Blue | Gray | Transparent (including non-white colors) | Black |
| O.D. [Distinction] | ~6 | ~5 ～ ~6 | ~5 ～ ~6 | ~6 | ~6 | ~6 | ~6 | ~6 | ~6 | ~5 ～ ~7 | ~5 ～ ~7 | ~7 | ~6 | ~6 | ~6 | ~6 | ~6 | ~5 ～ ~7 | ~6 | ~6 | ~5 ～ ~6 | ~6 | ~6 | ~5 ～ ~6 | ~6 ～ ~7 | ~6 | ~6 | ~6 | ~6 | ~6 | ~6 | ~6 | ~6 | ~6 | ~6 | ~6 | ~8 | ~9 | ~6 | ~6 | ~7 | ~6 | ~6 | ~6 | ~6 |
| Applicable Fluid | Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical | Air | Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical | Air | Air | Water / Air | Water / Air | Water / Air | Water / Air / General Hydraulic Oil | Water / Air / Thermal Media Oil | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical | Air | Air | Water / Air | Water / Air | Water / Air / General Hydraulic Oil | Water / Air | Air | Air | Water / Air | Water / Air | Air | Water / Air / General Hydraulic Oil | Water / Air / Chemical | Water / Air | Water / Air / Thermal Media Oil | Water / Air / Chemical | Air |
| O.D. D(Ø) | 6 | 4.76 ～ 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 ～ 6.35 | 6 ～ 6.35 | - | 6 | 6 | 6 | 6 | - | 4.76 ～ 6.35 | 6 | 6 | 4.76 ～ 6 | 6 | 6 | 4.76 ～ 6 | 6 ～ 6.35 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 8 | 8.2 | 6 | 6 | 6.35 | 6 | 6 | 6 | 6 |
| I.D. [Distinction] | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 | ~4 |
| I.D. d(Ø) | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 3.48 ～ 4 | - | 4 | 4 | 4 | 4 | - | 3.21 ～ 4 | 4 | 4 | 3.48 ～ 4 | 4 | 4 | 3.48 ～ 4 | 3.96 ～ 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 3.17 | 3.5 | 4 | 4 | 4 |
| Number of Bores(per piece) | - | - | - | 1 | - | 1 | - | 2 ～ 8 | - | - | - | 1 | - | - | 1 | - | - | - | 1 | 1 | - | 1 | - | - | - | - | 2 | 1 | - | 2 ～ 8 | - | - | - | 1 | 1 | 1 | - | - | - | - | 1 | - | 1 | 1 | 1 |
| Material, Urethane | Polyurethane | Polyurethane | - | Polyurethane | Polyurethane | - | Polyurethane | Polyurethane | - | - | - | - | Polyurethane | Polyurethane | - | - | Polyurethane | - | - | Polyurethane | - | Polyurethane | - | Polyurethane | - | - | Multi-Core Type Polyurethane | - | Polyurethane | Polyurethane | - | - | - | Polyurethane | Polyurethane | Polyurethane | - | - | Polyurethane | - | - | Polyurethane | - | - | Polyurethane |
| Material: Nylon | - | - | Nylon 12 | - | - | - | - | - | - | - | - | - | - | Others | - | - | - | Pressure Resistant Nylon | Soft Nylon | - | Nylon 12 | - | - | - | - | - | - | - | - | - | - | - | Soft Nylon | - | - | - | - | - | - | Soft Nylon | - | - | - | - | - |
| Material, Fluororesin | - | - | - | - | - | Standard Fluororesin | - | - | - | Soft Fluororesin | Standard Fluororesin | Standard Fluororesin | - | - | - | - | - | - | - | - | - | - | Soft Fluororesin | - | Others | - | - | Standard Fluororesin | - | - | - | - | - | - | - | - | - | - | - | - | Standard Fluororesin | - | - | Standard Fluororesin | - |
| Operating Environment | Standard | Standard | Standard | Standard / Sputter Resistant | Standard / Abrasion Resistance | Standard / Heat Resistance / Chemical Resistance | Standard | Standard | Standard | Standard / Chemical Resistance | Standard / Heat Resistance / Chemical Resistance | Standard / Heat Resistance / Chemical Resistance | Pressure Resistance | Standard | Standard / Clean Environment | Standard | Standard / Clean Environment | Standard / Abrasion Resistance / Oil Resistance / Chemical Resistance | Standard / Mold Cooling / Water Resistance / Pressure Resistance / Abrasion Resistance | Standard / Water Resistance / For Vacuum / Abrasion Resistance / Oil Resistance | Standard | Standard / Water Resistance | Standard / Abrasion Resistance / Chemical Resistance | Standard | Standard | Standard / Water Resistance / Weather Resistance | Standard | Standard / Corrosion Resistant / Water Resistance / Heat Resistance / Weather Resistance | Standard / For Vacuum / Abrasion Resistance / Oil Resistance | Standard / For Vacuum / Abrasion Resistance / Oil Resistance | Standard | Standard | Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Oil Resistance / Low Temp. Resistance / Chemical Resistance | Standard / Clean Environment / Water Resistance | Standard | Standard / Oil Resistance | Standard / Sputter Resistant / Water Resistance / For Vacuum / Heat Resistance / Oil Resistance | Standard / Sputter Resistant / Water Resistance / For Vacuum / Heat Resistance / Oil Resistance | Standard | Standard / Abrasion Resistance / Oil Resistance / Chemical Resistance | Standard / Antistatic / Heat Resistance / Weather Resistance / Chemical Resistance | Standard / Heat Resistance / Abrasion Resistance / Low Temp. Resistance | Sputter Resistant | Standard / Clean Environment / Corrosion Resistant / Water Resistance / Heat Resistance / Weather Resistance | Standard |
| O.D. (2nd Core) | - | - | - | - | - | - | - | 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D. (3rd Core) | - | - | - | - | - | - | - | 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D. (4th Core) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. (2nd Core) | - | - | - | - | - | - | - | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. (3rd Core) | - | - | - | - | - | - | - | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. (4th Core) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Types of Related components | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Type
-
Material
- Urethane
- Nylon
- Fluororesin
- Polyamide
- Fluororubber
- Silicon Rubber
- Polyolefin Resin
- Others
- PVC
- Polypropylene
-
Cutting Service Usage
- Yes
- No
-
Color
- Black
- White
- Translucent White
- Transparent (including non-white colors)
- Red
- Blue
- Yellow
- Green
- Orange
- Ocher
- Gray
- Multi Color
- Pink
- Others
- Brown
- Purple
- Silver
- Transparent Blue
-
O.D. [Distinction]
-
Applicable Fluid
- Water
- Air
- Chemical
- General Hydraulic Oil
- Thermal Media Oil
-
Metric / Inch
- metric
-
O.D. D(Ø)
- 0.090"
- 1/8"
- 5/32"
- 3/16"
- 0.205"
- 7/32"
- 1/4"
- 0.256"
- 5/16"
- 0.319"
- 3/8"
- 7/16"
- 0.441"
- 1/2"
- 17/32"
- 9/16"
- 0.579"
- 5/8"
- 11/16"
- 3/4"
- 13/16"
- 7/8"
- 1"
- 1-1/8"
- 1-1/4"
- 1-3/8"
- 1-1/2"
- 1-3/4"
- 2"
- 2-1/2"
- 3"
- 3-1/2"
- 1.6
- 1.7
- 1.8
- 10
- 10.2
- 10mm
- 11
- 11mm
- 12
- 12.2
- 12.5
- 12.7
- 12mm
- 13
- 13.5
- 13.5mm
- 13mm
- 14
- 14.2
- 14mm
- 15
- 16
- 16mm
- 17
- 18
- 18mm
- 2
- 2.5
- 20
- 22
- 23
- 24
- 25
- 25.4
- 26
- 28
- 29
- 3
- 3.17
- 3.18
- 3.2
- 3.5
- 34
- 35
- 4
- 4.5
- 4.76
- 42
- 47
- 48
- 4mm
- 5
- 5.95
- 52
- 57
- 5mm
- 6
- 6.35
- 62
- 7
- 7.6
- 7.85
- 7.94
- 7mm
- 8
- 8.2
- 8mm
- 9
- 9.53
- 9mm
-
I.D. [Distinction]
-
I.D. d(Ø)
-
Number of Bores(per piece)
-
Material, Urethane
-
Material: Nylon
-
Material, Fluororesin
-
Operating Environment
- Standard
- Clean Environment
- Corrosion Resistant
- Antistatic
- Sputter Resistant
- Mold Cooling
- Water Resistance
- Pressure Resistance
- For Vacuum
- Heat Resistance
- Abrasion Resistance
- Oil Resistance
- Low Temp. Resistance
- Weather Resistance
- Chemical Resistance
-
O.D. (2nd Core)
-
O.D. (3rd Core)
-
O.D. (4th Core)
-
I.D. (2nd Core)
-
I.D. (3rd Core)
-
I.D. (4th Core)
-
Types of Related components
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- Chiyoda (20)
- Junkosha (18)
- SMC (18)
- Nitta (17)
- Nihon Pisco (14)
- Nichias (1)
- Miruc Optical (0)
- I.Field (0)
- Chukoh Chemical Industries (0)
- Trusco Nakayama (0)
- CKD (0)
- Iwata Manufacturing (0)
- USA Industrials (0)
- Muromoto (0)
CAD
-
- 2D
- 3D
Application example related to this category
Related Categories to Tubes & Tube Accessories
-
- Cylinders, Rotary Actuators
- Cylinder Connecting Components
- Filters, Regulators, Lubricators
- Solenoid Valves
- Dryers for Pneumatics
- Pneumatic Pipe Fittings
- Flow Controls & Throttle Valves
- Manual-Type Valves, Mechanical-Type Valves
- Pneumatic Pipe Fittings
- Pressure, Flow Rate Sensors
- Silencers
- Compressors, Blowers
- Solenoid Valves for Fluid & Air-Operated Valves
- Tubes & Tube Accessories
- Other Pneumatic Devices
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy