Push to Connect Fittings（Page10）

• 

  Touch Connector Fuji, H Type, Union Y

  Chiyoda

  [Features]
  · This new fitting has a protection sleeve which prevents weld spatter from adhering around the release level.
  · Most one touch connectors have a plastic release ring only and they are often damaged by weld spatter

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Touch Connector H Type Nipple Connector

  Chiyoda

  One-touch fitting featuring high drawing strength and durability. Metal nipple connector.
  
  [Features]
  · By adopting the use of a special lock ring, the highest level of pull-out strength and durability is provided for one touch fittings.
  · O-ring is switched to Viton packing, so that it can be used in high temperature applications (it is best suited for P flexible piping; make sure that you install an OF at the end, such as the CKN-6-01-H-OF).
  · To insert a multi-layer tube, remove the outer layer and attach the one-touch coupling.
  · The life of the tube is increased significantly if a standard metal cap is fitted to prevent exposure of the inner tube.
  · All-metal types have excellent strength under tough conditions.
  · Screw element sealing (R screw): Can be used for piping as-is due to screw element sealing.
  · The body and screw elements of elbows and branch tees can rotate.
  · *Not a rotary type.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector H Type Union Tee

  Chiyoda

  [Features]
  · This new fitting has a protection sleeve which prevents weld spatter from adhering around the release level.
  · Most one touch connectors have a plastic release ring only and they are often damaged by weld spatter

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Five, H Type, Single Banjo

  Chiyoda

  [Features]
  · Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
  · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	13 Days or more

• 

  Touch Connector Five, H Type, Cast Male Elbow

  Chiyoda

  [Features]
  · Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
  · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Touch Connector Five, H Type, Male Connector

  Chiyoda

  [Features]
  · Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
  · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Touch Connector Five, H Type, Union Tee

  Chiyoda

  [Features]
  · Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
  · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Touch Connector Five H Type Long Male Elbow

  Chiyoda

  [Features]
  · Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
  · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	13 Days or more

• 

  Touch Connector FUJI H Type Male Elbow

  Chiyoda

  A male elbow with a sturdy metal exterior ideal for environments where sparks are generated.
  
  [Features]
  · All-metal types and resin body types available.
  · All-metal types have excellent strength under tough conditions, while the resin body types are lightweight.
  · Pipes connected to different machines can be identified easily when display rings (sold separately) are attached.
  · Rotation lock ring type, preventing full rotation of tube.
  · Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
  · The body and screw parts of elbows and branch tees can rotate.
  · *This is not a rotary type.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector 5 Hex Socket Male Connector

  Chiyoda

  Lightweight, one-touch fitting with a flame-retardant resin. Male connector with hex socket.
  
  [Features]
  · Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized to achieve the ultimate cost performance.
  · Further weight reduction achieved by making body parts all resin.
  · Utilized a new lock ring to achieve a joint function to perform piping work more smoothly and securely.
  · Used new packing to reduce the connecting operation force while maintaining high airtightness.
  · The models of all items have been described on products using an all-item laser marking process.
  · A standard, flame-retardant resin has been adopted.
  · Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
  · The body and screw parts of elbows and branch tees can rotate.
  · *This is not a rotary type.
  · Note that all resin types do not rotate.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Chemifit C1S Series, 90° Elbow EL-C1S

  Nitta

  [Features]
  · A completely oil-free processed product — parts are washed and assembled in a cleanroom. No oil or grease is used even for the sealing material.
  · The tube is connected by a PushOne® fitting: No jigs nor tools are required for connecting the tube.
  · The thread section is made of SUS304 for superior strength.
  · Double clean packaging: Each item is packed individually in a cleanroom and then packaged inside a zip-seal bag.
  · The main body and thread section rotate. The orientation of the elbow, tee, etc., can be decided when connecting the tubes.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Chemifit C1S Series, Connector EC-C1S

  Nitta

  The EC-C1S connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  Chemifit C1S Series - Female Connector EFC-C1S

  Nitta

  The EFC-C1S female connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  Chemifit C1 Series, 90° Elbow EL-C1

  Nitta

  90° Elbow EL-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Chemifit C1 Series - 90° Union Elbow - EUL-C1

  Nitta

  The EUL-C1 90° union elbow is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  Chemifit C1 Series, Y Joint EY-C1

  Nitta

  Y Joint EY-C1 is a completely oil-free, processed product. Parts are cleaned and assembled in clean rooms. No oil or grease is used, even for the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Chemifit C1 Series, Connector EC-C1

  Nitta

  The EC-C1 connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  Chemifit C1 Series Through Connector ETC-C1

  Nitta

  [Features]
  · Completely oil-free processed product. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.
  · The tube is connected by Push One®. No need for jigs or tools to connect the tube.
  · The liquid contact part is not metal. Fluids do not make contact with any metal, so metal ions are not released.
  · Excellent non-dust and non-polluting properties. A special polypropylene resin is used as a base material.
  •  Superior smoothness of inner surface. Injection-molded for a smooth interior.
  · Double clean packaging. Each fitting is packed in a clean room and put in a zipper-sealed bag.
  ▪ The main body and the threaded part rotate. The body can rotate freely even during piping of elbow and tee.
  ▪ Compliant with the MHLW Ministerial Notification No. 201 (2006), MHW Ministerial Notification No. 370 (1959), Japan.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  Chemifit C1 Series, Tee ET-C1

  Nitta

  Tee ET-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	10 Days or more

• 

  Chemifit C1 Series, Blank Plug BC-C1【5 Pieces Per Package】

  Nitta

  Blank Plug BC-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Chemifit C1 Series, Reducer ER-C1

  Nitta

  Reducer ER-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tube Removal Fixture (Off Tool) EOT

  Nitta

  [Features]
  · Assists in the removal of one-touch fittings.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Valve Built-in Connector ECV【10 Pieces Per Package】

  Nitta

  [Features]
  · Remove the tube to open and close the valve inside the fitting. When the tube is detached, the valve shuts automatically.
  · The tube is connected using Push One®. No need for jigs or tools to connect the tube.
  · Electroless nickel plated. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  · There is no need to seal the R-thread part with sealing tape.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	10 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Elbow

  Junkosha

  [Features]
  · Electroless nickel plating is as standard applied to metal parts.
  · The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removing direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  JUNRON One-Touch Fittings M Series (for General Piping) 45° Elbow【1-50 Pieces Per Package】

  Junkosha

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  · The nickel plating on all brass components of the M Series nipples and the plastic bodies have been standardized.
  · Colored seals for seal identification.
  · Each of the different types of R (PT) threads are coated with a different colored seal so they can be identified at a glance (PAT. NO 1820889).
  · The body can be positioned in accordance with the withdrawal direction of the tube.
  · The R (PT) threads of the elbow/tee and the resin joint sections rotate. This allows for free positioning in accordance with the withdrawal direction of the tube after the fitting has been mounted. In addition, the screw can be tightened while the resin part is fixed in position.
  · The tube grip is equipped with a rotating mechanism.
  · The tube grip rotates smoothly inside the fitting, which prevents the tube from turning and breaking.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Long Elbow

  Junkosha

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  ▪ It is available with colored seals based on the screw type.
  ▪ The body can be set in accordance with the direction in which the tube is removed.
  ▪ The tube grip comes with a rotating mechanism.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Elbow Plug

  Junkosha

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  · The nickel plating on all brass components of the M Series nipples and the plastic bodies have been standardized.
  · Colored seals for seal identification.
  · Each of the different types of R (PT) threads are coated with a different colored seal so they can be identified at a glance (PAT. NO 1820889).
  · The body can be positioned in accordance with the withdrawal direction of the tube.
  · The R (PT) threads of the elbow/tee and the resin joint sections rotate. This allows for free positioning in accordance with the withdrawal direction of the tube after the fitting has been mounted. In addition, the screw can be tightened while the resin part is fixed in position.
  · The tube grip is equipped with a rotating mechanism.
  · The tube grip rotates smoothly inside the fitting, which prevents the tube from turning and breaking.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Junron One Touch Fitting M Series (for General Piping) Union Elbow

  Junkosha

  [Features]
  · Electroless nickel plating is as standard applied to metal parts.
  · The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removing direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Junlon One-Touch Fitting M Series (General Piping) Tee

  Junkosha

  Electroless nickel plating is performed as standard on metal parts. Comes with a colored seal for screw identification. You can position the body in accordance with the direction in which the tube is removed. The Tube Grip comes with a rotating mechanism.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	14 Days or more

• 

  Junron One Touch Fitting M Series (for General Piping) Service Tee

  Junkosha

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  · The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removal direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Union Tee

  Junkosha

  [Features]
  · Electroless nickel plating is as standard applied to metal parts.
  · The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removing direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Reducing Union Tee

  Junkosha

  [Features]
  · Electroless nickel plating is applied as standard to metal parts.
  · All brass parts in the M series nipples and plastic bodies have nickel plating applied as standard.
  · Comes with a color seal for screw identification.
  · Each of the different types of R (PT) screw are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removal direction of the tube.
  ・R (PT) screw parts in elbows and Tees, and the resin mating parts rotate, allowing for free positioning according to the removal direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is still fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting, stopping the tube from turning.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Joint M Series (for General Piping) Union Y

  Junkosha

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  ▪ It is available with colored seals based on the screw type.
  ▪ The body can be set in accordance with the direction in which the tube is removed.
  ▪ The tube grip comes with a rotating mechanism.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Reducing Union Y Plug

  Junkosha

  [Features]
  · Electroless nickel plating is as standard applied to metal parts.
  · The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removing direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Male Y Connector

  Junkosha

  [Features]
  · Electroless nickel plating is applied as standard to metal parts.
  · All brass parts in the M series nipples and plastic bodies have nickel plating applied as standard.
  · Comes with a color seal for screw identification.
  · Each of the different types of R (PT) screw are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removal direction of the tube.
  ・R (PT) screw parts in elbows and Tees, and the resin mating parts rotate, allowing for free positioning according to the removal direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is still fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting, stopping the tube from turning.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Union

  Junkosha

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  · The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removal direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Reducing Union

  Junkosha

  [Features]
  · Electroless nickel plating is as standard applied to metal parts.
  · The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removing direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Bulkhead Union

  Junkosha

  [Features]
  · Electroless nickel plating is as standard applied to metal parts.
  · The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removing direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junlon One-Touch Fitting M Series (for General Piping) Bulkhead Female Union

  Junkosha

  [Features]
  · Electroless nickel plating is applied as standard to metal parts.
  · All brass parts in the M series nipples and plastic bodies have nickel plating applied as standard.
  · Comes with a color seal for screw identification.
  · Each of the different types of R (PT) screw are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removal direction of the tube.
  ・R (PT) screw parts in elbows and Tees, and the resin mating parts rotate, allowing for free positioning according to the removal direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is still fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting, stopping the tube from turning.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Reducer

  Junkosha

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  · The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removal direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Nipple

  Junkosha

  Nonflammable. Superior body strength and impact resistance. The tube grip is equipped with a rotating mechanism. All the sealing materials are water resistant NBR. No sealing tape is required. The R (PT) threads and resin connecting parts rotate.
  
  [Features]
  · All the resin sections conform to the UL94V-0 flame retardant rating.
  · The pull-out strength of the R (PT) thread resin press-fit part has been improved in comparison to conventional parts.
  · The shock resistance has been significantly improved by a new mechanism tube grip.
  · The tube clip rotates smoothly inside the fitting and prevents tube from breaking due to rotation of the tube.
  · NBR is used in the water-resistant O-ring and V-seal.
  · The R (PD) threads are sealed. Therefore, wrapping the threads with sealing tape is not required.
  · The combined part of the R (PT) thread of elbow tee and resin part can be rotated. After connecting, tube-piping direction can be freely implemented and the threads can be tightened even while the resin part is fixed.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Elbow

  Junkosha

  Nonflammable. Superior body strength and impact resistance. The tube grip is equipped with a rotating mechanism. All the sealing materials are water resistant NBR. No sealing tape is required. The R (PT) threads and resin connecting parts rotate.
  
  [Features]
  · All the resin sections conform to the UL94V-0 flame retardant rating.
  · The pull-out strength of the R (PT) thread resin press-fit part has been improved in comparison to conventional parts.
  · The shock resistance has been significantly improved by a new mechanism tube grip.
  · The tube clip rotates smoothly inside the fitting and prevents tube from breaking due to rotation of the tube.
  · NBR is used in the water-resistant O-ring and V-seal.
  · The R (PD) threads are sealed. Therefore, wrapping the threads with sealing tape is not required.
  · The combined part of the R (PT) thread of elbow tee and resin part can be rotated. After connecting, tube-piping direction can be freely implemented and the threads can be tightened even while the resin part is fixed.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Long

  Junkosha

  Nonflammable. Superior body strength and impact resistance. The Tube Grip comes with a rotating mechanism. All the sealing material is water-resistant NBR. No need for sealing tape. The R (PT) thread part and resin connection part rotate.
  
  [Features]
  · All the plastic portion conforms to UL94V-0 flame-retardant rating.
  · The burst strength of the R (PT) resin press fit part is 30% stronger than that of conventional parts.
  · Shock resistance has improved tremendously thanks to a new mechanism for the tube grip.
  · The tube grip rotates smoothly in the fitting and prevents the tube breaking due to rotation of the tube.
  ▪ Water-resistant O-ring and V-seal use NBR.
  ▪ R (PT) screw part is already sealed, hence no sealing tape is required.
  ▪ The combination of the R (P) screw part of the elbow tee and resin part can be rotated; after setting, the tube-piping direction can be freely adjusted and the screw part can be tightened even if the resin part is fixed.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	14 Days or more

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) 45° Elbow

  Junkosha

  Non-flammable. Superior body strength and impact resistance. The tube grip comes with a rotating mechanism. All the sealing material is water resistant NBR. No need for sealing tape. The R (PT) thread part and resin connection part rotate.
  
  [Features]
  · Plastic portion conforms to UL94V-0 flame retardant rating.
  · The burst strength of the R (PT) resin press fit part is 30% stronger than that of conventional parts.
  · The shock resistance has improved tremendously thanks to a new tube grip mechanism.
  · The tube clip rotates smoothly in the fitting and prevents tube breakage due to rotation of the tube.
  · Water resistant O-ring and V-seal made of NBR.
  · R (PT) screw part is already sealed, hence sealing tape is not required.
  · The combined part of the R (PT) screw part of the elbow tee and the resin part can be rotated after setting, meaning the piping can be installed in any direction and the screw part can be tightened even if the resin part is fixed.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	14 Days or more

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Union (Made of Plastic)

  Junkosha

  Incombustible. Superior body strength and impact resistance. The tube grip comes with a rotating mechanism. All the sealing material is water resistant NBR. No need for sealing tape. The R (PT) thread part and resin connection part rotate.
  
  [Features]
  · All the resin parts conform to UL94V-0 flame retardancy rating.
  · The burst strength of the R (PT) resin press fit part is stronger than that of conventional parts.
  · The impact resistance has improved tremendously thanks to a newly-designed tube grip.
  · The tube grip rotates smoothly in the fitting, preventing the tube from breaking due to the rotation of the tube.
  ▪ The O-ring and V-seal use water-resistant NBR.
  ▪ The R (PT) screw part is already sealed, so no sealing tape is required.
  ▪ The elbow/tee R (P) screw parts and resin parts can be rotated. After setting, the piping direction can be set freely and the screw part can be tightened, even if the resin part is fixed in place.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

Loading...